Experimental and theoretical analysis of bias ionization by?α-particles in a nitrogen laser

Nitrogen laser performance with TE configuration and wedge electrodes is analyzed with background ionization in the laser discharge channel by α particles at a low exposition rate. With the bias ionization, the laser power presents two peaks as a function of gas pressure, with one at the normal low pressure, without bias ionization, and the other at high pressure generated by bias ionization. A simple theoretical model has been developed in a trial to understand this behavior. This model was first tested in later results for a TE configuration nitrogen laser, with flat electrodes, without and with bias ionization. It has been observed that due to the competition between electrode shielding by positively charged α particles and bulk ionization by impact, the laser energy is suppressed with pressure below 50 Torr and enhanced above it.     

Multifrequency radiation force of acoustic waves in fluids

In this article we introduce the concept of multifrequency radiation force produced by a polychromatic acoustic beam propagating in a fluid. This force is a generalization of dynamic radiation force due to a bichromatic wave. We analyse the force exerted on a rigid sphere by a plane wave with N frequency components. Our approach is based on solving the related scattering problem, taking into account the nonlinearity of the fluid. The radiation force is calculated by integrating the excess of pressure in the quasilinear approximation over the surface of the sphere. Results reveal that the spectrum of the multifrequency radiation force is composed of up to N(N−1)/2 distinct frequency components. In addition, the radiation force generated by plane progressive waves is predominantly caused by parametric amplification. This is a phenomenon due to the nonlinear nature of wave propagation in fluids.     

A conserved karyotype of Sternopygus macrurus (Sternopygidae, Gymnotiformes) in the Amazon region: differences from other hydrographic basins suggest cryptic speciation

We studied the karyotypes of 35 Sternopygus macrurus fishes of four localities from rivers of the Eastern Amazon basin. In these four places the karyotypes have 2n = 46 chromosomes, NF = 92, where 30 are metacentric (M) and 16 submetacentric (SM). The constitutive heterochromatin (CH) is found in the centromeric region of most chromosomes and in the pericentromeric region of pairs 5, 17 and 19. Pair 1 has a large and not common heterochromatic block in the short arm, useful as a marker for this species if not found in other Sternopygus taxa. The NOR is located in the distal region of the short arm of pair 1, showing a size heteromorphism in some specimens. The CMA₃ and DAPI fluorochrome bandings and the fluorescent in situ hybridization (FISH), using pantelomeric human probes techniques are described for the first time for this species. DAPI has banding coincident with the C-banded regions, which suggests that the CH is AT base-pair-rich. CMA₃ banding is coincident with the NOR, meaning that this region is GC base-pair-rich. The FISH showed that the probes hybridized only with the telomeric regions, without any sign of interstitial telomeric regions. The karyotype of the samples from different places in the Amazon basin is quite conserved, probably because of the gene flow among the populations. The karyotype differences among the Sternopygus macrurus from the Amazon basin and the São Francisco and Paraná rivers suggest that these taxa may be different species.     

Analysis of metallic nanoparticles embedded in thin film semiconductors for optoelectronic applications

This paper reports about a study of the local plasmonic resonance (LSPR) produced by metal nanoparticles embedded in a dielectric or semiconductor matrix. It is presented an analysis of the LSPR for different nanoparticle metals, shapes, and embedding media composition. Metals of interest for nanoparticle composition are Aluminum and Gold. Shapes of interest are nanospheres and nanotriangles. We study in this work the optical properties of metal nanoparticles diluted in water or embedded in amorphous silicon, ITO and ZnO as a function of size, aspect-ratio and metal type. Following the analysis based on the exact solution of the Mie theory and DDSCAT numerical simulations, it is presented a comparison with experimental measurements realized with arrays of metal nanospheres. Simulations are also compared with the LSPR produced by gold nanotriangles (Au NTs) that were chemically produced and characterized by microscope and optical measurements.     

First principles study on structural,electronic and optical properties of Ga1−xBxP ternary alloys (x = 0, 0.25, 0.5, 0.75 and 1)

The structural, electronic and optical properties of GaP, BP binary compounds and their ternary alloys Ga_1?xB_xP ($x=0.25$, 0.5 and 0.75) have been studied by full-potential linearized augmented plane wave (FP-LAPW) method within the framework of density functional theory (DFT) as implemented in WIEN2k package. Local density approximation (LDA) and generalized gradient approximation (GGA) as proposed by Perdew–Burke–Ernzerhof (PBE), Wu–Cohen (WC) and PBE for solid (PBESol) were used for treatment of exchange-correlation effect in calculations. Additionally, the Tran–Blaha modified Becke–Johnson (mBJ) potential was also employed for electronic and optical calculations due to that it gives very accurate band gap of solids. As B concentration increases, the lattice constant reduces and the energy band gap firstly decreases for small composition x and then it shows increasing trend until pure BP. Our results show that the indirect–direct band gap transition can be reached from $x=0.33$. The linear optical properties, such as reflectivity, absorption coefficient, refractive index and optical conductivity of binary compounds and ternary alloys were derived from their calculated complex dielectric function in wide energy range up to 30 eV, and the alloying effect on these properties was also analyzed in detail.     

Fluorescent Properties of a Hybrid Cadmium Sulfide-Dendrimer Nanocomposite and its Quenching with Nitromethane

A fluorescent hybrid cadmium sulphide quantum dots (QDs) dendrimer nanocomposite (DAB-CdS) synthesised in water and stable in aqueous solution is described. The dendrimer, DAB-G5 dendrimer (polypropylenimine tetrahexacontaamine) generation 5, a diaminobutene core with 64 amine terminal primary groups. The maximum of the excitation and emission spectra, Stokes’ shift and the emission full width of half maximum of this nanocomposite are, respectively: 351, 535, 204 and 212 nm. The fluorescence time decay was complex and a four component decay time model originated a good fit (χ = 1.20) with the following lifetimes: τ ₁ = 657 ps; τ ₂ = 10.0 ns; τ ₃ = 59.42 ns; and τ ₄ = 265 ns. The fluorescence intensity of the nanocomposite is markedly quenched by the presence of nitromethane with a dynamic Stern-Volmer constant of 25 M⁻¹. The quenching profiles show that about 81% of the CdS QDs are located in the external layer of the dendrimer accessible to the quencher. PARAFAC analysis of the excitation emission matrices (EEM) acquired as function of the nitromethane concentration showed a trilinear data structure with only one linearly independent component describing the quenching which allows robust estimation of the excitation and emission spectra and of the quenching profiles. This water soluble and fluorescent nanocomposite shows a set of favourable properties to its use in sensor applications.     

Study of the structural, dielectric and magnetic properties of Bi2O3 and PbO addition on BiFeO3 ceramic matrix

In this paper we studied the effects of Bi₂O₃ and PbO addition on BiFeO₃ (BFO) ceramic matrix. The structural, dielectric and magnetic properties of fifteen BFO samples were discussed in view of possible applications in RF and microwave devices. The present work also reports the preparation of the samples. Polyvinyl alcohol (PVA) and tetraethyl orthosilicate (TEOS) were also added as a binder in the fabrication procedure. The samples have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and magnetic hysteresis measurements. Further, a study based on impedance spectroscopy also has been done. Dielectric permittivity (ε′) and dielectric loss (tan δ) were measured at room temperature in the frequency range 100 Hz-10 MHz, as well as a.c. conductivity. The -Im[Z(f)] versus Re[Z(f)] plot has been obtained. The samples were investigated in view of possible applications like miniaturized filters, diplexers and dielectric resonator antennas (DRA). In the RF and MW frequency region, the application of magneto-dielectric and multiferroic perovskite composite materials is desirable for the miniaturization of components.