1,2-Oxopalladation versus pi-allyl palladium route. A regioconvergent approach to a key intermediate for cyclopentanoids synthesis. New insights into the Pd(II)-catalyzed lactonization reaction

Regioconvergent synthesis of the key lactone 1 from an equimolar mixture of the two olefins 4 and 5 was achieved by unique Pd(II) chemistry. The synthetic versatility of lactone 1 has been demonstrated in the synthesis of iridoids and of the endo-Corey lactone 2, which is a key intermediate for the F(2)-isoprostane synthesis. Upon exposure of the sodium salts of 4 and 5 to a catalytic amount of Pd(OAc)(2) under oxygen, in the presence of AcOH, an isomeric lactone 12 was obtained in addition to the title compound 1. The Pd(II) lactonization was optimized by fine-tuning all the factors participating in the catalytic cycle: solvent, oxidant, co-oxidant, and Pd(II) source. The Hosokawa's heterobimetallic couple emerged as the catalyst of choice. With a Cu(II)-Pd(II) couple, the redox process was transferred to copper, and the formal oxidation state of palladium remained constant during the reaction. By virtue of this new methodology, lactone 1 was obtained in a rewarding 60% yield, along with isomeric lactone 12 in 30% yield. A detailed mechanistic study was carried out in order to elucidate the formation of lactones 1 and 12. Lactone 1 was formed from either olefin 8 or olefin 10; on the other hand, lactone 12 was formed exclusively from olefin 10. An intramolecular 1,2-acyloxypalladiation was invoked for the transformation of 8 into 1, whereas the pi-allyl complexes 13 and 11 were involved in the transformation of olefin 10 into 12 and 1, respectively.     

X-ray and mössbauer studies of tricyclohexyltin(IV) halides. The crystal structures of (cyclo-C6H11)3SnX (X = F,Br and I)

The structures of tricyclohexyltin fluoride (I), bromide (II) and iodide (III) have been determined by X-ray analysis. Compound I crystallizes in the space group P2₁/m with a = 10.422(6), b = 17.238(9), c = 5.769(3) Å, β = 104.6(1)° and Z = 2. Compounds II and III crystallize in the space group Pcmn with a = 10.427(6), b = 16.914(9), c = 11.366(6) Å, Z = 4; and a = 10.400(6), b = 16.900(10), c = 11.400(4) Å, Z = 4, respectively. All three structures consist of discrete tetrahedral (cyclo-C₆H₁₁)₃SnX units.The temperature dependence of the Mössbauer resonance areas has been examined in order to obtain information about the relationship between chemical structure and lattice dynamics.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Mechanisms of reduced human vascular cell migration after photodynamic therapy

Restenosis results from intimal hyperplasia and constrictive remodeling following cardiovascular interventions. Photodynamic therapy (PDT) has been shown to inhibit intimal hyperplasia in vivo by preventing neointimal repopulation of the treated vessel. This study was undertaken in an attempt to further dissect the mechanisms by which PDT acts on secreted and extracellular matrix proteins to inhibit migration of cultured human vascular cells. PDT of three-dimensional collagen gels inhibited invasive human smooth muscle cell (SMC) migration, whereas cell-derived matrix metalloproteinase production remained unaltered. Additionally, PDT generated cross-links in the collagen gels, a result substantiated in an ex vivo model whereby PDT rendered the treated vessels resistant to pepsin digestion and inhibited invasive migration of SMC and fibroblasts. These data support the premise that by inducing matrix protein cross-links, rendering the vessel resistant to degradation, in vivo PDT inhibits repopulation of the vessel and therefore intimal hyperplasia.     

Profiling fatty acids in vegetable oils by reactive pyrolysis-gas chromatography with dimethyl carbonate and titanium silicate

A novel methodology in on-line pyrolysis-gas chromatography (Py-GC) for the fast analysis of fatty acids in vegetable oils with minimal sample treatment and the use of non-toxic reagents is described. Pyrolysis at 500 degrees C for 10 s of sub-microgram quantity of vegetable oil dissolved in dimethyl carbonate (DMC) and in the presence of nanopowder titanium silicon oxide resulted in the production of fatty acid methyl esters (FAMEs) as unique products. Pyrolysis performed by means of a resistively heated filament pyrolyser interfaced to a GC-MS apparatus enabled the direct analysis of evolved FAMEs. The DMC/Py-GC-MS analysis was tested on soybean, coconut, linseed, walnut and olive oil and the results compared to the classical BF(3)-methanol as reference methodology. The DMC method exhibited a lower precision and was biased towards lower levels of polyunsaturated fatty acids (PUFA) in comparison to the BF(3)-methanol method, but was more advantageous in terms of reduced sample treatment, waste generation and risk factors of employed chemicals.     

Fluorescent behavior of B-phycoerythrin in microemulsions of aerosol OT/water/isooctane

Taking advantage of its unusual fluorescent properties, the incorporation of B-phycoerythrin (B-PE) in aerosol OT (AOT, sodium bis-(2-ethylhexyl) sulphosuccinate)/water/isooctane microemulsions was investigated by following their steady-state and time-resolved fluorescence as a function of the water-to-surfactant molar ratio, w(0). The fluorescent intensity at 575 nm increased continuously with increasing water content, saturating at a w(0) around 35 and staying practically constant at w(0)> or =40. The steady-state anisotropy showed an initial increase with increasing water content until w(0)=23 and then decreased strongly, staying practically constant when w(0)> or =40. The values of the fluorescent parameters, anisotropy and fluorescent intensity, were unchanged when the water content of the system increased in the range between w(0)=40 to 50. This implies the effective incorporation of B-PE in the microemulsion droplets with w(0)> or =40, as well as the equilibrium of the dispersion at these water/surfactant ratios, since higher water content does not affect the main surrounding microenvironment of the protein. The overall incorporation in the microemulsion droplets caused minor spectroscopic changes with respect to biliprotein in aqueous solution of 20 mM sodium phosphate buffer, pH 7.0, such as a blue absorption shift of 3 nm and an emission shift of 1.5 nm, as well as a slight increase in excitation anisotropy spectrum mainly caused by a decrease in protein mobility. Therefore, there are no important interactions between the chromophores and the AOT sulfonate head groups. Emission intensity decays followed complex kinetics in both aqueous and dispersion media. The stability with time and temperature of the biliprotein in the microemulsion was higher than in the aqueous solution. All the results can be explained in terms of B-PE inclusion in the water droplets of AOT microemulsions where the protein has similar configuration and conformation to that in aqueous solution but with the chromophores more protected.     

QUENCHING OF CHEMICALLY and ENZYMICALLY-GENERATED TRIPLET ACETONE BY TYROSINE and 3,5-DIHALOGENODERIVATIVES

Tyrosine and especially its 3,5-dihalogenoderivatives quench acetone triplets. When the excited acetone is generated free in solution, the Stern-Volmer plots for the quenching by these species, monitored via the sensitized emission of the 9,10-dibromoanthracene-2-sulfonate ion, are linear. When triplet acetone is generated enzymically by the peroxidase-catalyzed aerobic oxidation of isobutyral-dehyde, the Stern-Volmer plots for the quenching of the acetone phosphorescence curve upwards in the case of 3,5-dibromotyrosine and even more markedly with 3,5-diiodotyrosine. Quenching appears likely to occur by triplet-triplet energy transfer and especially in the case of the phenoxide form, also by electron transfer. The curvature denotes a static contribution to quenching favoured by the enzyme.     

Diastereoselective synthesis of α-amino-β-hydroxyacids

threo-α-Dibenzylamino-?-hydroxyesters (2) have been synthesised with high diastereoselectivity through the NaBH₄ reduction of α-dibenzylamino-β-oxoesters (4) and then tranformed into threo-α-amino-β-hydroxyacids.     

A Protein‐Resistant Matrix for Electrochemical Based Recognition Assays

In this work, two well known polymers, carboxymethyl dextran and poly(ethyleneglycol), are used for easily producing a platform for electrochemical affinity assays, avoiding nonspecific adsorption of proteins. In this way, modified electrode surfaces able to bind a recognition agent are constructed through simple and reliable reactions.     

Reactivity of peroxo forms of the vanadium haloperoxidase cofactor. A DFT investigation

Density functional theory has been used to investigate structural, electronic and reactivity properties of complexes related to the peroxo forms of vanadium haloperoxidases (VHPO). In particular, the reactivity of the cofactor as a function of protonation state and environment, which are two factors thought to be crucial in modulating the activity of the enzyme, has been examined. In full agreement with experimental data, results highlight the role of protonation in the activation of the peroxo-vanadium complexes and show that the oxo-transfer step involves the unprotonated axial peroxo oxygen atom, which is easily accessible to substrates in the peroxo form of the enzyme. The role of Lys353, which in the X-ray structure of the peroxide-bound form of vanadium chloroperoxidase is hydrogen bonded to the equatorial oxygen atom of the peroxo group, has been also explored. It is concluded that Lys353 can play a role similar to a H+ in the activation of the peroxo form of the cofactor.