Stereoselective iodocyclization of (S)-allylalanine derivatives: gamma-lactone vs cyclic carbamate formation

An efficient procedure for highly chemo- and stereoselective cyclization of (S)-allylalanine derivatives is reported (diastereomeric ratios up to 96:4) where the reaction course can be completely controlled by switching from gamma-lactones to cyclic carbamates simply with the proper choice of the amino acid protecting groups. Both processes are stereoconvergent and afford the (S,S)-products in high yields, short reaction times, and mild reaction conditions.     

Optimization and validation of a new approach based on CE-HRMS for the screening analysis of novel psychoactive substances (cathinones,phenethylamines, and tryptamines) in urine

The continuous introduction in the market of new psychoactive drugs (NPS) represents a well-known international emergency. Indeed, the European Monitoring Centre for Drugs and Drug Addiction and the United Nations Office on Drugs and Crime are paying great attention to the spread of NPS. In addition to the traditional analytical approaches based on GC-MS and HPLC-MS, also CE coupled with MS has proved to be a precious tool for the toxicological screening of biosamples. On these grounds, the aim of the present work was to test the application of CE-HRMS as a new screening tool for the rapid detection of these novel drugs in urine. Separations were performed in an uncoated fused-silica capillary with id of 75 μm with a total length of 100 cm, by applying a constant voltage of 15 kV. The QTOF-MS was implemented with an electrospray ion source operating in positive ionization full scan mode in the range of 100–1000 m/z. Under these conditions, different NPS has been tested, including eight cathinones, five phenethylamine, and seven tryptamines. The method was validated after optimization of the following analytical parameters: BGE composition and pH, separation voltage, sheath liquid composition, and flow rate and ESI source settings. The applicability of the method was successfully tested by analyzing a series of real urine samples obtained from drug users.     

Chiral ferrocenyl ligands with bidentate pyridine donors. Synthesis and application in Pd-catalyzed asymmetric allylic alkylation of 1,3-diphenylpropenyl-1-esters

A synthetic procedure relying on the Friedländer condensation of enantiopure α-amino ferrocenecarboxaldeyde has been devised for the regio-designed elaboration of a pyridine nucleus fused onto the ferrocene scaffold. Three novel bidentate ligands with different pyridine nitrogen donors featuring the [3,2-b]ferrocenopyridine fragment a as the sole chirogenic element have been prepared in enantiopure form through a multi step route involving the diastereoselective deprotonation of a chiral acetal of ferrocenecarboxaldehyde in the stereodetermining step. The ligands were assessed in the Pd-catalyzed allylic alkylation of 1,3-diphenyl-2-propenyl esters with good stereoselectivity.     

Novel approach to the synthesis of aliphatic and aromatic α-keto acids

A new practical and efficient synthesis of α-keto acids was accomplished starting from the synthon 1,4-diacetylpiperazine-2,5-dione. The synthesis encompasses both aromatic and aliphatic substrates proving to be versatile and innovative with excellent carbon economy and recycling of the glycine by-product.     

Determination of synthetic phenolic antioxidants and their metabolites in water samples by downscaled solid-phase extraction,silylation and gas chromatography–mass spectrometry

The development and performance evaluation of an analytical method dedicated to the comprehensive determination of the most relevant antioxidants and their metabolites in aqueous environmental samples is presented. This was achieved by a miniaturised solid-phase extraction (SPE) with 10 mg Oasis HLB cartridges, which allow to achieve a concentration factor of 200, reducing organic solvent wastes (1 mL of ethyl acetate suffices for complete elution) and SPE costs and eliminating the need for solvent evaporation that otherwise compromises the recoveries of butylated hydroxytoluene (BHT) and 2,6-di-tert-butylcyclohexa-2,5-diene-1,4-dione (BHT-Q). Analytes were then determined by gas chromatography–mass spectrometry (GC–MS) after derivatisation with N-methyl-N-(tert-butyldimethylsilyl)-trifluoroacetamide (MTBSTFA) in a single run. BHT-d₇ and n-propyl-paraben-d₄ (PrP-d₄) were used as surrogate internal standards. These surrogates allowed obtaining relative recoveries in the 80–110% range for all analytes even with complex wastewater samples and LODs at the 2–44 ng L⁻¹ level taking into account blank issues often associated to antioxidants analysis. The method was applied to sewage and river waters, showing that the seven analytes could be detected in raw wastewater. BHT and BHT-Q were the most concentrated species in that type of sample (in the 275–871 ng L⁻¹ range). On the other hand two metabolites of BHT, 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHT-CHO) and 3,5-di-tert-butyl-4-hydroxybenzoic acid (BHT-COOH) appeared to be the most ubiquitous species, being found in all samples in the 10–150 ng L⁻¹ concentration range.     

Applications of dewetting in micro and nanotechnology

Dewetting is a spontaneous phenomenon where a thin film on a surface ruptures into an ensemble of separated objects, like droplets, stripes, and pillars. Spatial correlations with characteristic distance and object size emerge spontaneously across the whole dewetted area, leading to regular motifs with long-range order. Characteristic length scales depend on film thickness, which is a convenient and robust technological parameter. Dewetting is therefore an attractive paradigm for organizing a material into structures of well-defined micro- or nanometre-size, precisely positioned on a surface, thus avoiding lithographical processes. This tutorial review introduces the reader to the physical-chemical basis of dewetting, shows how the dewetting process can be applied to different functional materials with relevance in technological applications, and highlights the possible strategies to control the length scales of the dewetting process.     

Facing unexpected reactivity paths with Zr(IV)-pyridylamido polymerization catalysts

This work provides original insights to the better understanding of the complex structure-activity relationship of Zr(IV)-pyridylamido-based olefin polymerization catalysts and highlights the importance of the metal-precursor choice (Zr(NMe(2))(4) vs. Zr(Bn)(4)) to prepare precatalysts of unambiguous identity. A temperature-controlled and reversible σ-bond metathesis/protonolysis reaction is found to take place on the Zr(IV)-amido complexes in the 298-383 K temperature range, changing the metal coordination sphere dramatically (from a five-coordinated tris-amido species stabilized by bidentate monoanionic {N,N(-)} ligands to a six-coordinated bis-amido-mono-amino complexes featured by tridentate dianionic {N(-),N,C(-)} ligands). Well-defined neutral Zr(IV)-pyridylamido complexes have been prepared from Zr(Bn)(4) as metal source. Their cationic derivatives [Zr(IV) N(-),N,C(-)}Bn](+)[B(C(6)F(5))(4)](-) have been successfully applied to the room-temperature polymerization of 1-hexene with productivities up to one order of magnitude higher than those reported for the related Hf(IV) state-of-the-art systems. Most importantly, a linear increase of the poly(1-hexene) M(n) values (30-250 kg mol(-1)) has been observed upon catalyst aging. According to that, the major active species (responsible for the increased M(n) polymer values) in the aged catalyst solution, has been identified.     

“Click” on Tubes: a Versatile Approach towards Multimodal Functionalization of SWCNTs

Organic functionalization of carbon nanotube sidewalls is a tool of primary importance in material science and nanotechnology, equally from a fundamental and an applicative point of view. 1 , 2 Here, an efficient and versatile approach for the organic/organometallic functionalization of single‐walled carbon nanotubes (SWCNTs) capable of imparting multimodality to these fundamental nanostructures, is described. Our strategy takes advantage of well‐established Cu‐mediated acetylene‐azide coupling (CuAAC) reactions applied to phenylazido‐functionalized SWCNTs for their convenient homo‐/heterodecoration with a number of organic/organometallic frameworks, or mixtures thereof, bearing terminal acetylene pendant arms. Phenylazido‐decorated SWCNTs were prepared by chemoselective arylation of the CNT sidewalls with diazonium salts under mild conditions, and subsequently used for the copper‐mediated cycloaddition protocol in the presence of terminal acetylenes. The latter reaction was performed in one step by using either single acetylene derivatives or equimolar mixtures of terminal alkynes bearing either similar functional groups (masked with orthogonally cleavable protecting groups) or easily distinguishable functionalities (on the basis of complementary analytical/spectroscopic techniques). All materials and intermediates were characterized with respect to their most relevant aspects/properties by TEM microscopy, thermogravimetric analysis coupled with MS analysis of volatiles (TG‐MS), elemental analysis, cyclic voltammetry (CV), Raman and UV/Vis spectroscopy. The functional loading and related chemical grafting of both primary amino‐ and ferrocene‐decorated SWCNTs were spectroscopically (UV/Vis, Kaiser test) and electrochemically (CV) determined, respectively.