2‐(4′‐Pyridyl‐N‐oxide)‐Substituted Hemithioindigos as Photoresponsive Guests for a Super Aryl‐Extended Calix[4]pyrrole Receptor

We report the synthesis of two 2‐(4′‐pyridyl‐N‐oxide)‐substituted hemithioindigos (HTIs). We probed their photoisomerization by using UV/Vis and ¹H NMR spectroscopy techniques. Light irradiation at λ=450 nm provoked the isomerization of the HTI Z isomer to the E counterpart to a large extent (≈80 % at the photostationary state). ¹H NMR titration experiments revealed the formation of thermodynamically and kinetically stable 1:1 inclusion complexes of the (Z)‐HTI isomers with a super aryl‐extended host (association constant>10⁴ m ^?1). Photoirradiation at λ=450 nm of the inclusion complexes induced the isomerization of the bound HTI N‐oxide to afford the (E)‐HTI?calix[4]pyrrole complex. We determined accurate association constant values for the 1:1 inclusion complexes of the (Z)‐ and (E)‐HTI isomers by using isothermal titration calorimetry experiments. The results showed that the stability constants of the (E)‐HTI complexes were 2.2–2.8‐fold lower than those of the (Z)‐HTI counterparts, which explains the lack of light‐induced release of the former to the bulk solution.     

Group 4 Metallocene Catalysts with Hapto‐Flexible Cyclopentadienyl‐Aryl Ligand

Catalytic precursors Ti(IV) and Zr(IV) complexes bearing cyclopentadienyl and substituted cyclopentadienyl anionic ligands, bonded to phenyl or substituted phenyl through an isopropylidene bridge have been utilized in the polymerization of propene and styrene and in ethylene‐styrene copolymerization. In the presence of trichloro[(1,2,3,4,5‐η)‐1‐(1‐methyl‐1‐phenylethyl)‐2,4‐cyclopentadien‐1‐yl]titanium (LTiCl₃) we have obtained either partially isotactic (chain‐end type) or atactic poly‐(propylene), and either atactic or syndiotactic polystyrene depending on the reaction temperature. [1‐Methyl‐1‐naphthylethyl‐2‐inden‐1‐yl]titanium(IV) behaves like (LTiCl₃) in styrene polymerization, while it affords metal‐controlled partially isotactic poly(propylene), as well as the corresponding zirconium compounds. The experimental data are tentatively explained by the temperature dependence of coordination of the bridged aryl group of the ligand.     

“Click” on Tubes: a Versatile Approach towards Multimodal Functionalization of SWCNTs

Organic functionalization of carbon nanotube sidewalls is a tool of primary importance in material science and nanotechnology, equally from a fundamental and an applicative point of view. 1 , 2 Here, an efficient and versatile approach for the organic/organometallic functionalization of single‐walled carbon nanotubes (SWCNTs) capable of imparting multimodality to these fundamental nanostructures, is described. Our strategy takes advantage of well‐established Cu‐mediated acetylene‐azide coupling (CuAAC) reactions applied to phenylazido‐functionalized SWCNTs for their convenient homo‐/heterodecoration with a number of organic/organometallic frameworks, or mixtures thereof, bearing terminal acetylene pendant arms. Phenylazido‐decorated SWCNTs were prepared by chemoselective arylation of the CNT sidewalls with diazonium salts under mild conditions, and subsequently used for the copper‐mediated cycloaddition protocol in the presence of terminal acetylenes. The latter reaction was performed in one step by using either single acetylene derivatives or equimolar mixtures of terminal alkynes bearing either similar functional groups (masked with orthogonally cleavable protecting groups) or easily distinguishable functionalities (on the basis of complementary analytical/spectroscopic techniques). All materials and intermediates were characterized with respect to their most relevant aspects/properties by TEM microscopy, thermogravimetric analysis coupled with MS analysis of volatiles (TG‐MS), elemental analysis, cyclic voltammetry (CV), Raman and UV/Vis spectroscopy. The functional loading and related chemical grafting of both primary amino‐ and ferrocene‐decorated SWCNTs were spectroscopically (UV/Vis, Kaiser test) and electrochemically (CV) determined, respectively.     

An intramolecular G-quadruplex structure is required for binding of telomeric repeat-containing RNA to the telomeric protein TRF2

Telomeric repeat-containing RNA (TERRA) is important for telomere regulation, but the structural basis for how TERRA localizes to chromosome ends is unknown. Here we report on studies exploring whether the TERRA G-quadruplex structure is critical for binding to telomeres. We demonstrate that the telomeric protein TRF2 binds TERRA via interactions that necessitate the formation of a G-quadruplex structure rather than the TERRA sequence per se. We also show that TRF2 simultaneously binds TERRA and telomeric duplex or G-quadruplex DNA. These observations suggest that the TERRA G-quadruplex is a key feature of telomere organization.     

Insulator to metal transition in fluid deuterium

We have investigated the insulator to metal transition in fluid deuterium using first principles simulations. Both density functional and quantum Monte Carlo calculations indicate that the electronic energy gap of the liquid vanishes at about ninefold compression and 3000 K. At these conditions the computed conductivity values are characteristic of a poor metal. These findings are consistent with those of recent shock wave experiments but the computed conductivity is larger than the measured value. From our ab initio results we conclude that the transition is driven by molecular dissociation rather than disorder and that both temperature and pressure play a key role in determining structural changes in the fluid.     

Electrode surface modification by a spirobifluorene derivative. An XPS and electrochemical investigation

Ordered thin layers of a spirobifluorene derivative containing an amino group were formed by grafting them onto a self-assembled monolayer (SAM) of 11-mercaptoundecanoic acid (11-MUA) on gold. Either physical (H-bonding) or chemical bonding (activated by EDCl) was investigated. X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy confirmed that both methods can be used to effectively graft 2-amino-9,9'-spirobifluorene molecules onto the SAM surface, giving high surface coverages, with a significantly higher packing in the case of chemisorbed films. EIS measurements also showed that the covalently bonded spirobifluorene SAMs act as an effective barrier to both ion penetration and heterogeneous electron transfer.     

Optimization and validation of a new approach based on CE-HRMS for the screening analysis of novel psychoactive substances (cathinones,phenethylamines, and tryptamines) in urine

The continuous introduction in the market of new psychoactive drugs (NPS) represents a well-known international emergency. Indeed, the European Monitoring Centre for Drugs and Drug Addiction and the United Nations Office on Drugs and Crime are paying great attention to the spread of NPS. In addition to the traditional analytical approaches based on GC-MS and HPLC-MS, also CE coupled with MS has proved to be a precious tool for the toxicological screening of biosamples. On these grounds, the aim of the present work was to test the application of CE-HRMS as a new screening tool for the rapid detection of these novel drugs in urine. Separations were performed in an uncoated fused-silica capillary with id of 75 μm with a total length of 100 cm, by applying a constant voltage of 15 kV. The QTOF-MS was implemented with an electrospray ion source operating in positive ionization full scan mode in the range of 100–1000 m/z. Under these conditions, different NPS has been tested, including eight cathinones, five phenethylamine, and seven tryptamines. The method was validated after optimization of the following analytical parameters: BGE composition and pH, separation voltage, sheath liquid composition, and flow rate and ESI source settings. The applicability of the method was successfully tested by analyzing a series of real urine samples obtained from drug users.     

New pyrazolo[3,4-b]pyridones as selective A(1) adenosine receptor antagonists: synthesis, biological evaluation and molecular modelling studies

A series of ethyl 4-amino-1-(2-chloro-2-phenylethyl)-6-oxo-6,7-dihydro-1H-pyrazolo[3,4-b]pyridine-5-carboxylates () has been synthesized as potential A(1) adenosine receptor (A(1) AR) ligands. Binding affinities of the new compounds were determined for adenosine A(1), A(2A) and A(3) receptors. Compounds and showed good affinity (K(i)= 299 nM and 517 nM, respectively) and selectivity towards A(1) AR, whereas showed good affinity for A(2A) AR (K(i)= 290 nM), higher than towards A(1) AR (K(i)= 1000 nM). The only arylamino derivative of the series displayed high affinity (K(i)= 4.6 nM) and selectivity for A(3) AR. Molecular modelling and 3D-QSAR (CoMFA) studies carried out on the most active compounds gave further support to the pharmacological results.     

Formation of O3+ upon ionization of O2: the role of isomeric O4+ complexes

The course of the reaction of electronically and vibronically excited metastable O(2) (+)((4)Pi(u), nu') ions with O(2), known to produce O(3) (+), was examined by the joint application of computational and mass spectrometric methods. The results show that the reaction does not proceed by a direct mechanism and that it involves instead the intermediacy of the [O(2) (+)((4)Pi(u)) x O(2)] and [O(3) (+)((4)A(2)) x O] complexes, both theoretically characterized, and the latter one positively identified by structurally diagnostic mass spectrometric techniques. The reaction is a potential source of stratospheric ozone, in that O(3) (+) ions are known to undergo efficient charge exchange with oxygen to yield neutral O(3).     

Synthesis of Uniform,Monodisperse, Sophorolipid Twisted Ribbons

Control over size monodispersity in chiral self‐assembled systems is important for potential applications like templating, tissue engineering or enantioselective chromatography, just to cite a few examples. In this context, it was reported that the saturated form of sophorolipids (SL), a bioderived glycolipid, are able to form self‐assembled twisted ribbons in water at neutral pH. Here, we show the possibility to control their size dispersion, generally between 10 and 40 nm after synthesis to a value of 13.5±1.5 nm, by a simple dialysis step eliminating the excess of NaCl. We use transmission electron microscopy under cryogenic conditions (cryo‐TEM) combined with small angle neutron scattering (SANS) to characterize the ribbon dispersion both visually and statistically. Two negative controls show the importance of salt in the aggregation process of the ribbons.