Effect of permodified β‐cyclodextrin on the photophysical properties of poly[2,7‐(9,9‐dioctylfluorene)‐alt‐(5,5′‐bithiophene)] main chain polyrotaxanes

The photophysical properties of two polyrotaxanes ( PFBTh?PSβCD and PFBTh?PMeβCD ) composed of fluorene and bithiophene encapsulated into permodified β‐cyclodextrin cavities have been investigated and compared with those of the reference PFBTh . Rotaxane formation results in improvements of the thermal stability, solubility in common organic solvents, as well as better film forming ability combined with a high transparency. As expected PFBTh and its encapsulated forms absorb at wavelengths beyond 510 nm, and time‐resolved photoluminescence (PL) in solution shows a well‐define vibronic structures with a predominance of the 0‐0 transitions and an energy difference of 0.16 eV. The fluorescence lifetimes follow a monoexponential decay with a value τ = 630 ± 30 ps. Atomic force microscopy, AFM, indicated a tendency of polyrotaxanes to organize into fibers. The advancing contact angles indicated higher surface hydrophobicity and lower surface free‐energy values for polyrotaxanes compared with their unthreaded analogues. The device based on PFBTh?PSβCD: PCBM in a 1/1 w/w ratio under simulated AM 1.5G illumination at 100 mW cm^?2 exhibited improved photovoltaic parameters of cells, resulted in high V_oc (0.68 V), J_sc (1.65 mA cm^?2), FF (31.6%), and PCE (0.35) values, compared with PFBTh or PFBTh?PMeβCD , respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 460–471     

Reaction of dichloroketene and sulfene with N,N-disubstituted α-aminomethyleneketones. Synthesis of pyrano[2,3-e]indazole and 1,2-oxathiino[6,5-e]indazole derivatives

The polar 1,4-cycloaddition of dichloroketene to N,N-disubstituted (E)-5-aminomethylene-1,5,6,7-tetrahydro-(1-methyl)(1-phenyl)-4H-indazol-4-ones V, prepared from 1,5,6,7-tetrahydro-(1-methyl)(1-phenyl)-4H-indazol-4-ones via the 5-hydroxymethylene derivatives, gave in good yield N,N-disubstituted 4-amino-3,3-dichloro-4,5,6,7-tetrahydro-(7-methyl)(7-phenyl)pyrano[2,3-e]indazol-(3H)ones VI, which are derivatives of the new heterocyclic system pyrano[2,3-e]indazole. Dehydrochlorination of VI with DBN afforded N,N-disubstituted 4-amino-3-chloro-6,7-dihydro(7-methyl)(7-phenyl)pyrano[2,3-e]indazol-2(5H]-ones VII generally in satisfactory yield. Full aromatization with DDQ of VII was tried only in the case of dimethylamino derivatives, giving a moderate yield of 3-chloro-4-dimethylamino(7-methyl)(7-phenyl)pyrano[2,3-e]indazol-2(7H)-ones. Cycloaddition of sulfene to V occurred only in the case of aliphatic N-substitution to give in moderate yield 4-dialkylamino-4,5,6,7-tetrahydro-(7-methyl)(7-phenyl)-3H-1,2-oxathiino[6,5-e]indazole 2,2-dioxides, which are derivatives of the new heterocyclic system 1,2-oxathiino[6,5-e]indazole.     

Base-Assisted Conversion of Protonated D-Fructose to 5-HMF: Searching for Gas-Phase Green Models

A gas-phase investigation of the D -fructose dehydration reaction in the presence of base has been performed by the joint application of mass spectrometric techniques and theoretical calculations. Protonated addition products of D -fructose and base were generated in the gas phase by electrospray ionization using several bases of different proton affinity. The intermediates, products and decomposition channels were investigated by ion trap mass spectrometry. Electronic structure calculations allowed the identification of the ionic intermediates and products of a selected system containing NH₃, helping to rationalize the observed reaction pathways. The obtained results show that the final product, the protonated 5-hydroxymethyl-2-furaldheyde [5-HMF]H⁺, is better formed using selected bases and only if these remain clustered until the end of the dehydration process.     

Signal processing to evaluate parameters affecting SPE for multi‐residue analysis of personal care products

This paper discusses the development of a comprehensive method for the simultaneous analysis of personal care products (PCPs) based on SPE and GC‐MS. The method was developed on 29 target compounds to represent PCPs belonging to different chemical classes: surfactants in detergents (alkyl benzenes), fragrances in cosmetics (nitro and polycyclic musks), antioxidants and preservatives (phenols), plasticizers (phthalates) displaying a wide range of volatility, polarity, water solubility. In addition to the conventional C₁₈ stationary phase, a surface modified styrene divinylbenzene polymeric phase (Strata^TM X SPE cartridge) has been investigated as suitable for the simultaneous extraction of several PCPs with polar and non‐polar characteristics. For both sorbents different solvent compositions and eluting conditions were tested and compared in order to achieve high extraction efficiency for as many sample components as possible. Comparison of the behavior of the two cartridges reveals that, overall, Strata‐X provides better efficiency with extraction recovery higher than 70% for most of the PCPs investigated. The best results were obtained under the following operative conditions: an evaporation temperature of 40°C, elution on Strata‐X cartridge using a volume of 15 mL of ethyl acetate (EA) as solvent and operating with slow flow rate (–10 KPa). In addition to the conventional method based on peak integration, a chemometric approach based on the computation of the experimental autocovariance function (EACVF_tot) was applied to the complex GC‐MS signal: the percentage recovery and information on peak abundance distribution can be evaluated for each procedure step. The PC‐based signal processing proved very helpful in assisting the development of the analytical procedure, since it saves labor and time and increases result reliability in handling GC complex signals.     

Effects of Combination Treatments with Astaxanthin-Loaded Microparticles and Pentoxifylline on Intracellular ROS and Radiosensitivity of J774A.1 Macrophages

Radiation-induced fibrosis (RIF) is a serious, yet incurable, complication of external beam radiation therapy for the treatment of cancer. Macrophages are key cellular actors in RIF because of their ability to produce reactive oxidants, such as reactive oxygen species (ROS) and inflammatory cytokines that, in turn, are the drivers of pro-fibrotic pathways. In a previous work, we showed that phagocytosis could be exploited to deliver the potent natural antioxidant astaxanthin specifically to macrophages. For this purpose, astaxanthin encapsulated into µm-sized protein particles could specifically target macrophages that can uptake the particles by phagocytosis. In these cells, astaxanthin microparticles significantly reduced intracellular ROS levels and the secretion of bioactive TGFβ and increased cell survival after radiation treatments. Here we show that pentoxifylline, a drug currently used for the treatment of muscle pain resulting from peripheral artery disease, amplifies the effects of astaxanthin microparticles on J774A.1 macrophages. Combination treatments with pentoxifylline and encapsulated astaxanthin might reduce the risk of RIF in cancer patients.     

Chemistry of cobalt(II) confined in the pores of ordered silica monoliths: from the formation of the monolith to the CoFe Prussian blue analogue nanocomposite

Recently we conceived of an original strategy that allows the precipitation of Prussian blue analogues (PBAs) in the ordered pores of silica monoliths to lead to photomagnetic CoFe PBA-silica nanocomposites. To determine the critical parameters and fully control the synthesis of the photoactive CoFe PBA in the pores of the silica matrix, X-ray absorption spectroscopy was performed at the cobalt K-edge. This study showed that cobalt cation chemistry is the keystone of the entire process. The local environment and the electronic structure of the cobalt cation undergo several modifications during the formation process: first the incorporation of the cation as an octahedral complex into the ordered block copolymer phase, then the deprotonation by thermohydrolysis to give a fourfold-coordinated deprotonated lowly condensed species and finally the formation of the 3D coordination network of CoFe PBA in acidic conditions through a rapid reprotonation followed by nucleophilic substitution accompanied by the electronic transfer, thus leading to the photomagnetic Co(III)(LS)-Fe(II)(LS) (LS=low spin) pairs.     

Hybrid Polyoxotungstates as Functional Comonomers in New Cross‐Linked Catalytic Polymers for Sustainable Oxidation with Hydrogen Peroxide

Anchoring terminal octenyl tails on molecular polyoxotungstates yield polymerizable organic–inorganic monomers with formula [{CH₂?CH(CH₂)₆Si}_xO_ySiW_wO_z]^4? [x=2, w=11, y=1, z=39 ( 1 ); x=2, w=10, y=1, z=36 ( 2 ); and x=4, w=9, y=3, z=34 ( 3 )]. These molecular hybrids can use aqueous hydrogen peroxide to catalyze the selective oxidation of organic sulfides in CH₃CN. Copolymerization of 1 – 3 with methyl methacrylate and ethylene glycol dimethacrylate leads to porous materials with a homogeneous distribution of the functional monomers, as indicated by converging evidence from FTIR spectroscopy and electronic microscopy. The catalytic polymers activate hydrogen peroxide for oxygen transfer, as demonstrated by the quantitative and selective oxidation of methyl p‐tolyl sulfide, which was screened as model substrate. The hybrid material containing monomer 2 was also tested in n‐octane to evaluate its potential for the oxidation and removal of dibenzothiophene, a well‐known gasoline contaminant.