Protons’ generation by laser irradiation at 5 × 10 W/cm from silicon dielectric targets containing an excess of hydrogen

A study of silicon plasma generated in vacuum by 532 nm Nd:YAG laser at intensities of about 5 × 10⁹ W/cm² from dielectric targets containing a relatively huge quantity of hydrogen was presented.Time-of-flight technique was employed to measure the particles’ energy and the relative yield with respect to other ion species. Plasma-accelerated ions show Coulomb-Boltzmann-shifted distributions depending on their charge state.Mass quadrupole spectrometry allowed the estimation of the relative hydrogen amount inside the different samples considered: silicon (Si), silicon nitride (Si₃N₄) and hydrogenated annealed silicon (Si(H)) as a function of the ablation depth and irradiation time.Depth profiles of the laser craters permit to calculate the ablation yield at the used laser fluence. The plasma temperature and density was evaluated by the experimental data. A special regard is given to the protons’ generation process occurring inside the plasma, due to the possible influence of the hydrogen excess on the treated samples in comparison to the not-hydrogenated silicon ones.     

The pivotal role of copper(II) in the enantiorecognition of tryptophan and histidine by gold nanoparticles

Stereoselective amino acid analysis has increasingly moved into the scope of interest of the scientific community. In this work, we report a study on the chiral recognition of d,l-Trp and d,l-His using l-Cys-capped gold nanoparticles (AuNPs) and copper(II) ion. In the l-Cys-capped AuNPs, the thiol group of the amino acid interacts with AuNPs through the formation of Au–S bond, whereas the α-amino and α-carboxyl groups of the surface-confined cysteine can coordinate the copper(II) ion, which in turn, binds the l- or d-amino acid present in solution forming diastereoisomeric complexes. The resulting systems have been characterized by UV–Vis spectra and dynamic light scattering measurements, obtaining different results for l- and d-Trp, as well as for l- and d-His. The knowledge of the solution equilibria of the investigated systems allowed us to accurately calculate in advance the concentrations of the species present in solution and to optimize the system performances, highlighting the pivotal role of copper(II) ion in the enantiodiscrimination processes.     

Analytical quality by design in the development of a cyclodextrin‐modified capillary electrophoresis method for the assay of metformin and its related substances

Quality by Design (QbD) is a new paradigm of quality to be applied to pharmaceutical products and processes, recently encouraged by International Conference on Harmonisation guidelines. In this paper QbD approach was applied to the development of a CE method for the simultaneous assay of metformin hydrochloride (MET) and its main impurities. QbD strategy was focused on electrophoretic process understanding, and the analytical method was thoroughly evaluated by applying risk assessment and chemometric tools. Method scouting allowed CD‐CZE based on the addition of carboxymethyl‐β‐CD to Britton‐Robinson acidic buffer to be chosen as operative mode. Seven critical process parameters (CPPs) were selected, related to capillary, injection, BGE and instrumental settings. The effect of the different levels of the CPPs on critical quality attributes (CQAs), e.g. critical resolution values and analysis time, was evaluated in a screening study. Response surface methodology led to draw contour plots and sweet spot plots. The definition of design space was accomplished by applying Monte‐Carlo simulations, thus identifying by risk of failure maps a multivariate zone where the CQAs fulfilled the requirements with a selected probability. Finally, a control strategy was designed and the method was applied to a real sample of MET tablets.     

Metal-sensitive and thermostable trypsin from the crevalle jack (<Emphasis Type="Italic">Caranx hippos</Emphasis>) pyloric caeca: purification and characterization

Background

Over the past decades, the economic development and world population growth has led to increased for food demand. Increasing the fish production is considered one of the alternatives to meet the increased food demand, but the processing of fish leads to by-products such as skin, bones and viscera, a source of environmental contamination. Fish viscera have been reported as an important source of digestive proteases with interesting characteristics for biotechnological processes. Thus, the aim of this study was to purify and to characterize a trypsin from the processing by-products of crevalle jack (Caranx hippos) fish.

Results

A 27.5 kDa trypsin with N-terminal amino acid sequence IVGGFECTPHVFAYQ was easily purified from the pyloric caeca of the crevalle jack. Its physicochemical and kinetic properties were evaluated using N-α-benzoyl-_DL-arginine-p-nitroanilide (BApNA) as substrate. In addition, the effects of various metal ions and specific protease inhibitors on trypsin activity were determined. Optimum pH and temperature were 8.0 and 50°C, respectively. After incubation at 50°C for 30 min the enzyme lost only 20% of its activity. K _m , k_cat, and k _cat /K _m values using BApNA as substrate were 0.689 mM, 6.9 s^-1, and 10 s^-1 mM^-1, respectively. High inhibition of trypsin activity was observed after incubation with Cd²⁺, Al³⁺, Zn²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ at 1 mM, revealing high sensitivity of the enzyme to metal ions.

Conclusions

Extraction of a thermostable trypsin from by-products of the fishery industry confirms the potential of these materials as an alternative source of these biomolecules. Furthermore, the results suggest that this trypsin-like enzyme presents interesting biotechnological properties for industrial applications.

     

Chemical characterisation of old cabbage (Brassica oleracea L. var. acephala) seed oil by liquid chromatography and different spectroscopic detection systems

We report an extensive chemical characterisation of fatty acids, triacylglycerols, tocopherols, carotenoids and polyphenols contained in the oil extracted from old cabbage (Brassica oleracea L. var. acephala) by cold-pressing of the seeds. Analyses were performed by GC-FID combined with mass spectrometry, HPLC with photodiode array, fluorescence and mass spectrometry detection. The 94% of the total fatty acids were unsaturated, rappresented by erucic acid (more than 50%) followed by linoleic, linolenic and oleic acids accounting for approximately 10% each. The most abundant triacylglycerols (>13%) were represented by erucic–gadolenic–linoleic, erucic–eruci–linoleic and erucic–erucic–oleic. Among tocopherols, γ-tocopherol accounted for over 70% of the total content. Thirteen carotenoids and 11 polyphenols were identified and measured. In particular, the total content in carotenoids was 10.9 ppm and all-E-lutein was the main component (7.7 ppm); among polyphenols, six hydroxycinnamic acids and five flavonoids, were identified by combining information from retention times, PDA and MS data.     

Serial coupled columns reversed-phase separations in high-performance liquid chromatography. Tool for analysis of complex real samples

High-performance liquid chromatography is considered as the selected analytical tool for a huge number of applications, including the carotenoid analysis. However, due to the great complexity of some natural samples containing this kind of compounds, conventional LC could not have enough separation power. In this work, serial connection of several columns is proposed as an alternative to LC and also to comprehensive two-dimensional LC for the analysis of carotenoids from complex real matrices. Different parameters regarding these separation procedures are studied and discussed, such as the stationary phase used or the application of high separation temperatures. The applicability of connecting two C30 columns to significantly increase the separation power, resolution and peak capacity for the analysis of carotenoids has been demonstrated for the first time. In fact, a peak capacity of 79 was obtained when using two C30 serial coupled columns, compared to 61 achieved using a single column. Similar improvements were also observed for the other serial couplings studied. The present methodology could be applied to the analysis of carotenoids in a great variety of samples. To the best of our knowledge, this is the first development carried out to study natural products such as carotenoids using columns coupled in series.     

Ligand exchange capillary electrophoresis by cyclodextrin derivatives, a powerful tool for enantiomeric separations

Five pure CD derivatives synthesized in our laboratory were used as chiral selectors in the presence of copper(II) ion. Three enantiomeric pairs of amino acids were submitted to separation experiments in CE, by exploiting the ligand exchange mechanism. The results obtained in the investigated systems, together with those of the analogous systems previously studied, clearly show the usefulness of this technique in chiral separations. By comparing the ligand exchange CE results with potentiometric results, either reported elsewhere or studied here for the first time (system Cu/CDampy/tyrosine), it has been possible to rationalise the separation results. The importance of the availability of pure selectors, and to characterise them both spectroscopically and thermodynamically is discussed.     

Mass spectrometric characterization of poly(ethylene terephthalate-co-p-oxybenzoate)

Copolyesters containing ethylene terephthalate and p-oxybenzoate units in mole ratios of ca. 80:20, 70:30, 40:60, and 20:80, respectively, were examined by direct pyrolysis–mass spectrometry to obtain information about the thermal stabilities and the sequences distributions of the two types of units as a function of composition. Thermal stability as measured by rate of volatilization increased with increasing oxybenzoate content, as did the amount of char residue formed. The electron impact mass spectrum of the volatile fragments showed the formation of predominantly linear fragments with carboxyl and vinyl end groups. Dimer, trimer, and tetramer fragments containing either or both types of units could be identified and their relative amounts could be estimated from peak intensities. The results were consistent with those expected for random distributions of the two units, i.e., for statistical copolymers.     

The photochemistry of flutamide and its inclusion complex with beta-cyclodextrin. Dramatic effect of the microenvironment on the nature and on the efficiency of the photodegradation pathways

The photochemistry of the anticancer drug flutamide (FM), 2-methyl-N-[4-nitro-3-(trifluoromethyl)phenyl]propanamide, in homogeneous media and in the beta-cyclodextrin (beta-CD) cavity has been investigated. The photoreactivity of the free molecule has been rationalized on the basis of an intramolecular nitro to nitrite rearrangement followed by cleavage of the nitrite intermediate. The twisted geometry of the nitro group with respect to the aromatic plane plays a key role in triggering such a photoprocess. Incorporation of FM in the beta-CD cavity leads to dramatic effects on both the efficiency and the nature of the photochemical deactivation pathways of the guest molecule. A 20-fold increase in the FM photodecomposition quantum yield and the formation of photoproducts originated by both reduction of the nitro group and cleavage of the amide bond were observed in the presence of the macrocycle. Such a behavior cannot be attributed exclusively to the micropolarity of beta-CD and/or to its role as a reactant. The induced circular dichroism spectra and the nature of the photoproducts formed in these experimental conditions provide indications that the photoreactivity in the beta-CD microenvironment could likely be mediated by structural changes of FM upon complexation.     

Archaeometric Analysis of Ancient Copper Artefacts by Laser-Induced Breakdown Spectroscopy Technique

Twelve archaeological copper objects from the burial site of “Fontino” cave, near Grosseto, (around 2500–2000 B.C.) were analysed using laser-induced breakdown spectroscopy. Qualitative results and a preliminary study of the samples’ composition are reported and used to make a quantitative estimate; based on these results, the samples were classified using principal components statistical analysis. The perspectives of using laser-induced breakdown spectroscopy for archaeometric analysis are also discussed.