Photoaddressable polymers for liquid crystal alignment

We demonstrate reversible photoinduced in situ reorientation of low molecular mass liquid crystals (LCs) by means of photoaddressable polymers (PAPs). These polymers contain mesogenic azobenzene side chains optimized to reorient cooperatively and effectively upon illumination with polarized light. Various low molecular mass LCs were introduced between two PAP layers and these sandwich devices were tested with respect to stability and reversibility of photoinduced orientation. Dissolution of the PAP layer by the low molecular mass LC was observed for several material combinations and systematically investigated. Different anisotropic dyes were added as fluorescence markers in order to monitor the photoinduced LC orientation. With an optimized material combination, more than 10 reversible reorientation processes could be realized with polarized light of either 514 or 405 nm wavelength, without any reduction in alignment quality. Further, microscopic polarized fluorescence patterns could be produced and erased within short exposure times.     

Aryl‐Phosphonate Lanthanide Complexes and Their Fluorinated Derivatives: Investigation of Their Unusual Relaxometric Behavior and Potential Application as Dual Frequency 1H/19F MRI Probes

A series of low molecular weight lanthanide complexes were developed that have high ¹H longitudinal relaxivities (r₁) and the potential to be used as dual frequency ¹H and ¹⁹F MR probes. Their behavior was investigated in more detail through relaxometry, pH‐potentiometry, luminescence, and multinuclear NMR spectroscopy. Fitting of the ¹H NMRD and ¹⁷O NMR profiles demonstrated a very short water residence lifetime (<10 ns) and an appreciable second sphere effect. At lower field strengths (20 MHz), two of the complexes displayed a peak in r₁ (21.7 and 16.3 mM ^?1 s^?1) caused by an agglomeration, that can be disrupted through the addition of phosphate anions. NMR spectroscopy revealed that at least two species are present in solution interconverting through an intramolecular binding process. Two complexes provided a suitable signal in ¹⁹F NMR spectroscopy and through the selection of optimized imaging parameters, phantom images were obtained in a MRI scanner at concentrations as low as 1 mM . The developed probes could be visualized through both ¹H and ¹⁹F MRI, showing their capability to function as dual frequency MRI contrast agents.     

Trace formulas for additive and non-additive perturbations

Trace formulas for pairs of self-adjoint, maximal dissipative and accumulative as well as other types of resolvent comparable operators are obtained. In particular, the existence of a complex-valued spectral shift function for a pair {H^′,H}$\{H^{\prime },H\}$ of maximal accumulative operators has been proved. We investigate also the existence of a real-valued spectral shift function. Moreover, we treat in detail the case of additive trace class perturbations. Assuming that H   and H^′=H+V$H^{\prime }=H+V$ are maximal accumulative and V is trace class, we prove the existence of a summable   complex-valued spectral shift function. We also obtain trace formulas for pairs {H,H^?}$\{H,H^{?}\}$assuming only that H and  H^?$H^{?}$are resolvent comparable. In this case the determinant of the characteristic function of H is involved in trace formulas.     

Synthesis of sugar oxime ether surfactants

A straightforward synthesis of a novel class of sugar surfactants is described. The key step is the chemoselective condensation of a hydrophobic alkoxyamine with the resident aldehyde/ketone moiety on a hydrophilic sugar. Neither protection/deprotection of the sugars nor extensive product purification is required. The method allows for the facile adjustment of hydrophobic and hydrophilic domains of the sugar oxime ether surfactant and uses inexpensive, readily accessible, and renewable materials.     

Snapshot Mueller matrix spectropolarimeter

We present a new snapshot technique for performing spectrally resolved Mueller matrix polarimetry. The basic approach is an extension of the channeled spectropolarimetry technique, employing frequency-domain interferometry to encode polarization information into modulation of the spectrum.     

“Golden” Cascade Cyclization to Benzo[c]-Phenanthridines

Herein, we describe a gold-catalyzed cascade cyclization of Boc-protected benzylamines bearing two tethered alkyne moieties in a domino reaction initiated by a 6-endo-dig cyclization. The reaction was screened intensively, and the scope was explored, resulting in nine new Boc-protected dihydrobenzo[c]phenanthridines with yields of up to 98 %; even a π-extension and two bidirectional approaches were successful. Furthermore, thermal cleavage of the Boc group and subsequent oxidation gave substituted benzo[c]phenanthridines in up to quantitative yields. Two bidirectional approaches under the optimized conditions were successful, and the resulting π-extended molecules were tested as organic semiconductors in organic thin-film transistors.     

Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.     

Atomic Layer Deposition of Cobalt Phosphide for Efficient Water Splitting

Transition‐metal phosphides (TMP) prepared by atomic layer deposition (ALD) are reported for the first time. Ultrathin Co‐P films were deposited by using PH₃ plasma as the phosphorus source and an extra H₂ plasma step to remove excess P in the growing films. The optimized ALD process proceeded by self‐limited layer‐by‐layer growth, and the deposited Co‐P films were highly pure and smooth. The Co‐P films deposited via ALD exhibited better electrochemical and photoelectrochemical hydrogen evolution reaction (HER) activities than similar Co‐P films prepared by the traditional post‐phosphorization method. Moreover, the deposition of ultrathin Co‐P films on periodic trenches was demonstrated, which highlights the broad and promising potential application of this ALD process for a conformal coating of TMP films on complex three‐dimensional (3D) architectures.     

Effects of the type of crosslink on viscoelastic properties of natural rubber

The viscoelastic properties of various crosslinked natural rubbers, NR, were investigated by mechanical spectroscopy. The glass transition temperature, T_g, was found to be dependent on both the crosslink density and the crosslink type. Higher values of T_g were obtained for sulfur-crosslinked NR than for peroxide-crosslinked NR at the same crosslink density. The greater influence of the sulfur content on T_g may be attributed to polysulfidic crosslinks and cyclic sulfide structures favored at high sulfur contents. Sulfur-vulcanized NRs with monosulfidic crosslinks, favored at relatively high accelerator/sulfur ratios, have properties more similar to the peroxide-cured NR with simple carbon(SINGLE BOND)carbon crosslinks covalent bonds, resulting in only small shifts in T_g. A qualitative analysis of monosulfidic crosslinks and polysulfidic structures was performed with ¹³C solid-state NMR spectroscopy. The storage modulus, E′, in the rubbery plateau region increased with increasing crosslink density. However, the crosslink type did not influence the moduli values as much as it influenced the T_g values. Different methods of detecting the crosslink density were also discussed. © 1996 John Wiley & Sons, Inc.