Trinuclear heterobimetallic complexes with binucleating dithioxamides: stereoselective synthesis and solution behavior involving Pd-N bond rupture

Bischelate platinum(II) complexes of the type [Pt(H-R(2)-N(2)C(2)S(2))(2)] (H-R(2)-N(2)C(2)S(2)(-) = dialkyl-dithioxamidate) are ditopic receptors which, after coordination of the first Pd(eta(3)-allyl)(+) moiety, induce the orientation of the second palladium-allyl fragment. Thus, a series of trimetallic complexes of formula bis-[(eta(3)-allyl)-palladium(II)](mu-bis-dialkyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been prepared in which the allyl fragments are oriented toward the same side of the molecular plane. We have also prepared the trimetallic complex using a dithioxamide obtained from the racemic phenylethylamine. Only two isomers were produced in equimolar ratio: the racemate that has four homochiral alkyl substituents and the mesoform containing the meso-dithioxamide that has homochiral substituents on the same side of molecular plane. Under the effect of the temperature, the trimetallic Pd-Pt-Pd complexes undergo rapid allyl isomerization; the mechanism of the isomerization, which is similar to that found by us in an analogue Pt-Pd bimetallic complex, is discussed. The crystal and molecular structure of bis-[(eta(3)-allyl)-palladium(II)](mu-bis-[S]-phenylethyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been reported.     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

Solvent-free,microwave-assisted synthesis of thiophene oligomers via Suzuki coupling

The purpose of this study was to obtain a rapid, efficient, and environmentally friendly methodology for the synthesis of highly pure thiophene oligomers. The solvent-free, microwave-assisted coupling of thienyl boronic acids and esters with thienyl bromides, using aluminum oxide as the solid support, allowed us to rapidly check the reaction trends on changing times, temperature, catalyst, and base and easily optimize the experimental conditions to obtain the targeted product in fair amounts. This procedure offers a novel, general, and very rapid route to the preparation of soluble thiophene oligomers. Thus, for example, quaterthiophene was obtained in 6 min by reaction of 2-bromo-2,2'-bithiophene with bis(pinacolato)diboron (isolated yield 65%), whereas quinquethiophene was obtained in 11 min by reaction of dibromoterthiophene with thienylboronic acid (isolated yield 74%). The synthesis of new chiral 2,2'-bithiophenes is reported. The detailed analysis of the byproducts of some reactions allowed us to elucidate a few aspects of reaction mechanisms. While the use of microwaves proved to be very convenient for the coupling between conventional thienyl moieties, the same was not true for the coupling of thienyl rings to thienyl-S,S-dioxide moieties. Indeed, in this case, the targeted product was obtained in low yields because of the competitive, accelerated, Diels-Alder reaction that affords a variety of condensation products.     

Synthesis of functionalized polyhedral oligomeric silsesquioxane (POSS) macromers by microwave assisted 1,3-dipolar cycloaddition

In this paper we report the first synthesis of isoxazolidine and isoxazoline-POSS macromers by 1,3-dipolar cycloaddition reactions of vinyl- and styryl-POSS with N-methyl-C-ethoxycarbonylnitrone and ethoxycarbonyl nitrile oxide, promoted by microwave irradiation. The nature of the resulting cycloadducts has been determined by NOE experiments and supported by computational studies at PM3 and DFT B3LYP/6-31G* levels.     

Electrochemical behaviour of some polyoxo clusters

We describe the redox behaviour in non-aqueous solvents of some cyclopentadienyl(oxo)titanium derivatives. The derivative [Ti₄{η⁵-C₅H₄(SiMe₃)}₄(μ-O)₆] shows an electrochemically and chemically reversible le reduction process, followed by a multi-electron, chemically complicated reduction at a fairly cathodic potential. On the basis of the overall electrochemical features and the comparison with the redox behaviour of the quasi-planar compound [[Ti{η⁵-C₅H₄(SiMe₃)}Cl(μ-O)]₄] we propose an EECCEE mechanism for the first derivative, where the second electron-transfer induces a cascade of chemical reactions giving rise to irreversible cluster breakdown. The electrochemically induced fragmentation can be viewed as a retrosynthetic pathway. The heterometallic derivative [{Ti(η⁵-C₅H₄Me)₂(μ₂-MoO₄)₂}₂] shows two consecutive reduction processes; the first is chemically reversible, and the second quasi-reversible. The molybdate bridges apparently increase the stability of the electrogenerated anions. However none of these poly-oxo clusters can be considered as good models of electron ‘sinks’.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

The Elusive beta-unsubstituted calix[5]pyrrole finally captured

[reaction: see text] The meso-decamethyl-calix[5]pyrrole 2b was synthesized from the furan-based analogue 1b via the homologation of the furan rings to pyrrole, and its solid-state structure was determined by X-ray crystallography: surprisingly, the binding constant of 2b toward chloride is found to be lower than that of the tetrameric analogue 2a.     

The binding ability of iron bonded to porphodimethene: structural, magnetic, and electronic relationship to iron porphyrin complexes

The availability of the parent compound, meso-hexaethylporphodimetheneiron(II), [(Et6N4)Fe] (2), of this report results from a novel synthetic methodology that makes [Et6N4Li2] (1) easily available. The major focus is on how the axial positions, which are the key reactive sites in metalloporphyrins, and the electronic configuration of the metal can be affected by the breakdown of the aromaticity of the porphyrin skeleton and by the nonplanar conformation of the ligand. DFT calculations indicate a 3B1(dz2)1(dyz)1 ground state for 2 versus the 3A2(dxz)1(dyz)1 ground state in the porphyrin analogue. The intermediate-spin state (S = 1) of 2 changed drastically upon addition of one or two axial ligands, as hexacoordination is preferred by iron(II). The hexacoordinate complexes [(Et6N4)Fe(L)(L')] (L = L' = THF, 3; L = L' = Py, 4; L = PhNO, L' = Py, 14) have been isolated and structurally characterized. Strong-field ligands lead to a low-spin diamagnetic state for iron(II), namely for complexes 4-7, 9, and 14, whereas 3 is a typical d6 high-spin complex, as is the pentacoordinate [(Et6N4)Fe(CN)]Bu4N (8). The structural analysis showed common features for 6, 7, 9, and 14: i) a small displacement of the metal from the N4 plane, and ii) an N4 cavity, larger than that in the corresponding porphyrins, affecting the Fe-N bond lengths. The 1H NMR spectrum is quite diagnostic of the two-fold symmetry in the diamagnetic hexacoordinate complexes, revealing either a D2h or a C2v symmetry. The CO stretching frequency (1951 cm(-1)) in complex 6 probes the good electron density at the metal. The one-electron oxidation of 2 led to pentacoordinate iron(III) derivatives [(Et6N4)Fe(Cl)] (10), [(Et6N4)2Fe2(mu-O)] (11), and [(Et6N4)2Fe2(mu-p-OC6H4-O)] (12). Complex 10 is a typical high-spin iron(III) (5.85muB at 298 K), while 11 and 12 behave as antiferromagnetic coupled iron(III) (J = -9.4cm(-1), 12, and J = -115cm(-1), 11). In complexes 10, 11, and 12 iron is sitting in a quite distorted square pyramidal geometry, in which the ligand displays a very distorted roof conformation with different degrees of ruffling. Distinctive structural and magnetic features have been found for the nitrosyl derivative [(Et6N4)Fe-NO], which has a low-spin state (S = 1/2) and the following structural parameters: Fe-N-O, 147.3(2) degrees; Fe-N, 1.708(2) A; N-O, 1.172(3) A. A comparative structural, magnetic, and theoretical analysis of the compounds listed above has been made with the analogous porphyrin derivatives. The detailed structural investigation has been mapped through the X-ray analysis of 2, 7, 8, 9, 11, 13, and 14.     

Indium(III) chloride catalyzed one step synthesis of some new dibenzo(d,f)(1,3)dioxepines and 12H-dibenzo(d,g)(1,3)dioxocin derivatives

In the presence of catalytic amount of indium(III) chloride (10 mol %), 2,2′-dihydroxybiphenyl and bis(2-hydroxyphenyl)methane react quickly, without using any solvent, with ketones or β-keto esters possessing at least one hydrogen atom in α to the ketone-carbonyl group, to afford some new dibenzo(d,f)(1,3)dioxepines and some 12H-dibenzo(d,g)(1,3)dioxocin derivatives, respectively.     

Metodi variazionali nello studio di problemi al contorno con parte non lineare discontinua

The main purpose of this paper is to use variational methods in the study of problems of following type: $$\left\{ {\begin{array}{*{20}c} {Lu = \lambda f(x,u) in \Omega } \\ {u = 0 on \partial \Omega } \\ \end{array} } \right.$$ Here Ω is supposed to be a bounded domain with smooth boundary ? Ω,L an elliptic operator, λ∈IR andf(x, t) a real function defined on \(\tilde \Omega \times IR\) having one or several simple discontinuities ont. Mainly we are interested in solutions which satisfy (.) a. e., which are most meaningful in physical problems, and we prove various existence theorems for several choices ofL, f and λ. The main difficulty consists in the fact that the functionals related to (.) are not Fréchet differentiable in every point, sincef is discontinuous.