A molecular dynamics study of the role of the cation in modifying the structure of alkali borate glasses

The structures of the full series of alkali borate glasses (M₂O)_x(B₂O₃)_1?x (M = Li, Na, K, Rb and Cs) at two different concentrations, x = 0.14 and x = 0.30, have been investigated by means of molecular dynamics simulations. Additional compositions have also been investigated for the lithium and caesium borate glasses (x = 0.10, 0.20, 0.25, and 0.40). The main experimental trends are well reproduced by the simulations, even if the agreement is not quantitative. Our results indicate that lithium atoms can enter into the matrix of pure vitreous B₂O₃ without inducing large modifications in the B–O network, even at large concentrations. However when the other alkali ions are added to the initial structure, the network opens to accommodate the larger size of the cation. These modifications induce the appearance of a low-Q shoulder or pre-peak, whose intensity increases with increasing alkali concentration as well as with increasing alkali size.     

The influence of chitosan on cyclodextrin complexing and solubilizing abilities towards drugs

The present work was performed to investigate the effect of chitosan, a well known hydrophilic polymer with both enhancer and solubilizing properties, on the solubilizing and complexing abilities of cyclodextrins towards drugs. With this aim, phase-solubility studies were carried out with a series of model drugs, both of acid and basic nature and with different water-solubility and lipophilicity values, in the presence of chitosan and cyclodextrin (ß- or hydroxypropyl-ß-cyclodextrin), both separately (binary systems) and in combination (ternary systems). Unexpectedly, differently from the favorable effect reported in literature for various hydrophilic polymers, the addition of chitosan to the cyclodextrin complexation medium caused a decrease in the cyclodextrin complexing power towards all the examined drugs, independent from their very different physicochemical properties. On the contrary, the influence of the polymer on the cyclodextrin solubilizing efficiency was found to be dependent on the type of drug and both positive, or negative or non-significant effects were observed. The overall results are explained in terms of a common basic mechanism due to the presence of chitosan–cyclodextrin interactions, which hindered the drug–cyclodextrin complex formation, thus causing the binding constant reduction; the simultaneous presence of drug–chitosan and/or chitosan–(drug–cyclodextrin complex) interactions, different from drug to drug, were considered responsible for the distinct (and sometimes opposite) effects observed in the drug solubilizing efficiency of ternary systems.     

Global existence for a contact problem with adhesion

In this paper, we analyze a contact problem with irreversible adhesion between a viscoelastic body and a rigid support. On the basis of Frémond's theory, we detail the derivation of the model and of the resulting partial differential equation system. Hence, we prove the existence of global in time solutions (to a suitable variational formulation) of the related Cauchy problem by means of an approximation procedure, combined with monotonicity and compactness tools, and with a prolongation argument. In fact the approximate problem (for which we prove a local well-posedness result) models a contact phenomenon in which the occurrence of repulsive dynamics is allowed for. We also show local uniqueness of the solutions, and a continuous dependence result under some additional assumptions. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of Regioisomeric Functionalized Benzodifurans and Angelicins

Arenofurans have important biological and pharmacological activities. Compared to benzofurans, the reports on the synthesis of benzodifurans are rather limited. Here, we report the synthesis of a linear and an angular 3,3′‐bis(carboxymethyl)substituted benzodifuran and 4′‐carboxymethyl‐substituted angelicins from phloroglucinol, using 4‐halomethyl‐substituted dipyrones as key intermediates in the synthetic route. This strategy shows that the stability of a pyrone ring depends on the type of substituent at C(4) and the conditions used.     

Central limit behavior in the Kuramoto model at the “edge of chaos”

We study the relationship between chaotic behavior and the Central Limit Theorem (CLT) in the Kuramoto model. We calculate sums of angles at equidistant times along deterministic trajectories of single oscillators and we show that, when chaos is sufficiently strong, the Pdfs of the sums tend to a Gaussian, consistently with the standard CLT. On the other hand, when the system is at the “edge of chaos” (i.e. in a regime with vanishing Lyapunov exponents), robust q-Gaussian-like limit distributions naturally emerge, consistently with recently proved generalizations of the CLT.     

Electrochemical Detection of Vascular Endothelial Growth Factor by Molecularly Imprinted Polymer

In this study, we report the development of a sensitive label‐free impedimetric sensor based on molecularly imprinted polymer (MIP) as biomimetic receptor coupled with screen‐printed electrodes (SPEs) for the detection of vascular endothelial growth factor (VEGF). Firstly, electropolymerization of o‐phenylenediamine (o‐PD) in the presence of VEGF molecule by cyclic voltammetry was performed onto graphite screen‐printed electrodes. The solvent extraction of the target was then carried out. The MIP based sensor was characterized by electrochemical techniques and scanning electron microscopy (SEM). Using optimized experimental conditions, the single‐use MIP‐based sensor showed a good analytical performance for VEGF detection from 20 to 200 pg mL^?1 with limit of detection of 0.08 pg mL^?1. Finally, the developed MIP‐based sensor in human serum samples was also tested.     

Brønsted Base Catalyzed One‐Pot Synthesis of Stereodefined Six‐Member Carbocycles Featuring Transient Trienolates and a Key Intramolecular 1,6‐Addition

A catalyst‐driven one‐pot reaction sequence is developed for the enantio‐ and diastereoselective synthesis of tetrasubstituted cyclohexenes from simple unsaturated ketones or thioesters. The method involves a tertiary amine/squaramide‐catalyzed α‐selective addition of transiently generated trienolates to nitroolefins, subsequent base‐catalyzed double bond isomerization, and an intramolecular (vinylogous) 1,6‐addition reaction, a rare key carbocyclization step that proceeded with essentially perfect stereocontrol.     

Continuous Dependence on Initial Data in Fluid–Structure Motions

We prove a continuous dependence theorem for weak solutions of equations governing a fluid–structure interaction problem in two spatial dimensions. The proof is based on a priori estimates which, in particular, convey uniqueness of weak solutions. The estimates are obtained using Eulerian coordinates, without remapping the problem into a fixed domain.     

Study on the Effect of Uniaxial Elongational Flow on Polyamide Based Nanocomposites

This work focuses on the study of uniaxial elongational flow and its effects on morphology and stiffness of polyamide-6 based nanocomposites prepared by melt compounding. The elongational flow characterization was realized by converging flow method and fiber spinning technique. During the haul-off tests, fibers of the neat polyamide-6 and the hybrids (at 3 and 6 wt% of silicate) were collected at different draw ratios. Mechanical properties of the produced fibers were investigated and correlated to their nanostructure through analytical techniques sensitive to different aspects of morphology, such as DSC and TEM analysis. Rheological results, obtained with a capillary rheometer, indicate that the shear viscosity decreases with the silicate loading, while the extentional viscosity increases. Moreover, the presence of the silicate in polymer matrix leads to enhancements of draw-down force and reduction of the breaking draw ratio. In hybrid fibers an enhanced degree of exfoliation of the filler was observed upon drawing. Moreover, DSC analyses suggest that the crystalline structure of the fibers is the result of two opposite effects: the presence of the silicate which stabilizes the γ form and the drawing which promotes the α crystal phase. The degree of silicate exfoliation and the amount of the different crystal phases strongly affect the tensile properties of the fibers.     

Counterion-controlled transition of a cationic gemini from submicroscopic to giant vesicles

While much is known about the self-assembly of lipids on nanoscale, our understanding of their biologically relevant mesoscale organization remains incomplete. Here, we show for a cationic gemini lipid a sharp and reversible transition from small vesicles with an average diameter of approximately 40 nm to giant vesicles (GVs) with an average diameter of approximately 11 microm. This transition is dependent on proper [NaCl] and specific temperature. Below this transition and in the vicinity of the air/water interface, a series of mesoscale morphological transitions was observed, revealing complex structures resembling biological membranes. On the basis of microscopy experiments, a tentative [NaCl] versus temperature shape/size phase diagram was constructed. To explain this unprecedented transition, we propose a novel mechanism whereby a specific interaction of Cl(-) counterion with the cationic gemini surfactant initiates the formation of a commensurate solute counterion lattice with low spontaneous curvature. In keeping with the high bending rigidity of NaCl crystal, this tightly associated ionic lattice enslaves membrane curvature and the mesoscale 3-D organization of this lipid.