Probenecid and benzamide: DSC applied to the study of an “impossible” pharmaceutical system

Journal of Thermal Analysis and Calorimetry - The study of the binary system probenecid–benzamide is an excellent example of the power and the limits of thermal analysis applied to the...     

The Physico-Chemical Properties of Glipizide: New Findings

The present work is a concrete example of how physico-chemical studies, if performed in depth, are crucial to understand the behavior of pharmaceutical solids and constitute a solid basis for the control of the reproducibility of the industrial batches. In particular, a deep study of the thermal behavior of glipizide, a hypoglycemic drug, was carried out with the aim of clarifying whether the recognition of its polymorphic forms can really be done on the basis of the endothermic peak that the literature studies attribute to the melting of the compound. A number of analytical techniques were used: thermal techniques (DSC, TGA), X-ray powder diffraction (XRPD), FT-IR spectroscopy and scanning electron microscopy (SEM). Great attention was paid to the experimental design and to the interpretation of the combined results obtained by all these techniques. We proved that the attribution of the endothermic peak shown by glipizide to its melting was actually wrong. The DSC peak is no doubt triggered by a decomposition process that involves gas evolution (cyclohexanamine and carbon dioxide) and formation of 5-methyl-N-[2-(4-sulphamoylphenyl) ethyl] pyrazine-2-carboxamide, which remains as decomposition residue. Thermal treatments properly designed and the combined use of DSC with FT-IR and XRPD led to identifying a new polymorphic form of 5-methyl-N-[2-(4-sulphamoylphenyl) ethyl] pyrazine-2-carboxamide, which is obtained by crystallization from the melt. Hence, our results put into evidence that the check of the polymorphic form of glipizide cannot be based on the temperature values of the DSC peak, since such a peak is due to a decomposition process whose Tonset value is strongly affected by the particle size. Kinetic studies of the decomposition process show the high stability of solid glipizide at room temperature.     

Chemical depth profiling and 3D reconstruction of III–V heterostructures selectively grown on non‐planar Si substrates by MOCVD

The chemical characterization of novel 3D architectures with nanometre‐scale dimensions is extremely challenging. The chemical composition of InGaAs/AlAs quantum wells selectively grown in SiO₂ trenches, 100–300 nm wide, is studied. Combining high lateral resolution 3D ToF‐SIMS analysis and Auger measurements, the chemical composition of individual trenches was obtained confirming the uniformity of these III–V heterostructures. These results correlate well with an average approach using SIMS depth profiling. The effects of ion beam orientation on the surface topography of confined structures were highlighted. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

HPLC‐MS/MS method for quantitative determination of the novel dual inhibitor of FGF and VEGF receptors E‐3810 in tumor tissues from xenograft mice and human biopsies

We developed and validated a high‐performance liquid chromatography–tandem mass spectrometry analytical method to measure E‐3810, a novel dual inhibitor of fibroblast growth factor receptor 1 and vascular endothelial growth factor receptor 1–3 in tissues and determined the drug concentration in a biopsy of human breast cancer for the first time. The method is a modification of our previous one in plasma to study the clinical pharmacokinetics of the drug during the phase I/II trial. In view of the changes in matrix, we applied a partial validation protocol to determine recovery, sensitivity, range of linearity, precision, accuracy and stability of the method over three runs in a mouse tumor tissue and liver. The recovery of E‐3810 from liver or tumor homogenate was >69%, and the lower limit of quantification was 5 ng/ml. The method was linear in the concentration range 5.0–500.0 ng/ml, as demonstrated by a determination coefficient R² ≥ 0.9955. The range of the calibration curve was appropriate for the analysis, as demonstrated by the accuracy, which was between 91.4% and 106.7%. Interday precision and accuracy on quality control samples at 9, 30 and 300 ng/ml were 3.1‐11.2% and 98.3–111.4%, respectively. The assay was applied successfully to determine the intratumor concentration of E‐3810 in different mouse xenograft tumor models and in a biopsy of a patient with breast cancer included in the phase I/II trial of the drug. In mouse tumors, the concentrations of E‐3810 were higher than necessary to exert antitumor activity in vitro (1 µM). Even more of interest was the result obtained in a human biopsy of few milligrams, where E‐3810 reached 4.9 µg/g (11 µM). Copyright © 2014 John Wiley & Sons, Ltd.     

“Surface-enhanced Raman spectroscopy studies of the passive layer formation in gold leaching from thiosulfate solutions in the presence of cupric ion”

Complementary electrochemical and spectroscopic techniques were used to characterize the behavior and composition of the passive layer formed at the gold surface in a thiosulfate electrolyte in the presence of cupric ions. Raman studies of three different cationic (calcium, ammonium, and sodium) thiosulfate leaching solutions revealed that the concentrations of thiosulfate, trithionate, sulfate, and tetrathionate remained constant in the bulk solution over a 3-h time period. The initial leaching current densities of these three systems were identical; however, significant differences in the open circuit potentials of these systems were observed. To provide additional information about the nature of the passive layer, gold nanorod array electrodes were fabricated and employed as substrates for studying the species present at the gold–thiosulfate interface using surface-enhanced Raman spectroscopy (SERS). The composition and behavior of the passive layer at the gold–thiosulfate interface greatly differed from those of the bulk solutions. The passive layer consisted primarily of elemental sulfur and sulfide-like species, with thiosulfate and its oxidation products, such as tri- and tetrathionates, as minority components. The nature of the cation (calcium, sodium, or ammonium) of the thiosulfate salt showed no significant effect on the composition of the passive layer at leaching times longer than 100 min. In addition, the presence of cupric ions also had no significant effect on the formation of the passive layer. However, copper is a much better oxidant than oxygen in gold–thiosulfate leaching reactions.     

Inherently Chiral Macrocyclic Oligothiophenes: Easily Accessible Electrosensitive Cavities with Outstanding Enantioselection Performances

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain‐end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an “inherently chiral” sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability.     

The Influence of Different Bleaching Protocols on Dentinal Enzymatic Activity: An In Vitro Study

This study aimed to investigate matrix metalloproteinase (MMP) activity in human dentin using in-situ and gelatin zymography, after at-home and in-office bleaching, related to their clinical exposure times. Dentin specimens (n = 5) were treated with 35% hydrogen peroxide (50 min per session/4 sessions), 10% carbamide peroxide (180 min/21 sessions), or no treatment. All were subjected to in-situ zymography. Dentin slices were, subsequently, obtained, covered with fluorescein-conjugated gelatin, and examined with confocal laser-scanning microscopy. The fluorescence intensity was quantified and statistically analyzed using one-way ANOVA and Bonferroni tests (α = 0.05). Furthermore, gelatin zymography was performed on protein extracts obtained from dentin powder (N = 8 teeth), treated with hydrogen peroxide or carbamide peroxide, with different exposure times (10/50 min for hydrogen peroxide; 252/1260 min for carbamide peroxide). The results of the in-situ zymography showed no statistical differences between the bleached specimens and the control group, with a medium level of gelatinolytic activity expressed in the dentin tubules. The results of gelatin zymography showed an increased expression of pro-MMP-9 in carbamide peroxide groups. The expression of pro-MMP-2 decreased in all the experimental groups. The bleaching treatments performed on the enamel of sound teeth do not influence dentinal enzymatic activity. However, when unprotected dentin tissue is bleached, matrix metalloproteinases are more expressed, particularly when carbamide peroxide is used, proportional to the exposure time.     

Glucose/Ribitol Dehydrogenase and 16.9 kDa Class I Heat Shock Protein 1 as Novel Wheat Allergens in Baker’s Respiratory Allergy

Wheat allergens are responsible for symptoms in 60–70% of bakers with work-related allergy, and knowledge, at the molecular level, of this disorder is progressively accumulating. The aim of the present study is to investigate the panel of wheat IgE positivity in allergic Italian bakers, evaluating a possible contribution of novel wheat allergens included in the water/salt soluble fraction. The water/salt-soluble wheat flour proteins from the Italian wheat cultivar Bolero were separated by using 1-DE and 2-DE gel electrophoresis. IgE-binding proteins were detected using the pooled sera of 26 wheat allergic bakers by immunoblotting and directly recognized in Coomassie stained gel. After a preparative electrophoretic step, two enriched fractions were furtherly separated in 2-DE allowing for detection, by Coomassie, of three different proteins in the range of 21–27 kDa that were recognized by the pooled baker’s IgE. Recovered spots were analyzed by nanoHPLC Chip tandem mass spectrometry (MS/MS). The immunodetected spots in 2D were subjected to mass spectrometry (MS) analysis identifying two new allergenic proteins: a glucose/ribitol dehydrogenase and a 16.9 kDa class I heat shock protein 1. Mass spectrometer testing of flour proteins of the wheat cultivars utilized by allergic bakers improves the identification of until now unknown occupational wheat allergens.     

Synthesis and properties of new poly(ether sulfone)amides

High molecular-weight aromatic polyamides were obtained from 1,5- and 2,6-bis-(4′-carboxy-4-phenylenoxy-sulfonyl)naphthalene by direct polycondensation reaction in N-methyl-2-pyrrolidone with various aromatic diamines, using triphenyl phosphite and pyridine as condensing agents. The polymers were characterized by elemental analysis, thermogravimetric analysis, differential scanning calorimetry, and infrared analysis. The polyamides, obtained in quantitative yield, possessed inherent viscosities in the range 0.42–1.70 dL/g, glass transition temperatures between 245–310°C, and 10% weight loss temperatures in nitrogen and air above 435 and 424°C, respectively. Most of the polymers were soluble in aprotic solvents. The effect of the structure on properties, such as solubility, T_g, and thermal behavior, were also studied. © 1996 John Wiley & Sons, Inc.