Models for biological trinuclear copper clusters. Characterization and enantioselective catalytic oxidation of catechols by the copper(II) complexes of a chiral ligand derived from (S)-(-)-1,1'-binaphthyl-2,2'-diamine

The dinuclear and trinuclear Cu(II) complexes of an octadentate ligand derived from (S)-1,1'-binaphthyl-2,2'-diamine have been prepared and characterized by UV/Vis, CD, EPR and NMR spectroscopy. The ligand contains two tridentate aminobis(benzimidazole) donor arms connected to a central bidentate diaminobinaphthyl linker, which hosts the chiral unit. In the dinuclear Cu complex the ligation occurs essentially within the tridentate arms of the ligand. The two Cu centers are EPR nonequivalent and noninteracting. The EPR data suggests that one of the Cu ions additionally interacts with one of the tertiary aminonaphthyl donors. In the trinuclear complex the two aminonaphthyl donors bind the third Cu ion. The EPR spectrum of this complex shows the signal for a mononuclear Cu(II) center bound to a tridentate arm, while the remaining two Cu(II) centers are coupled through hydroxo groups. The CD spectrum shows that in the free ligand a severe reduction of the dihedral angle between the naphthyl groups from the strain free range occurs. This conformation is stabilized by ring stacking interactions with the benzimidazole groups. On complex formation this interaction is removed because the benzimidazole groups are involved in metal binding. In the dinuclear Cu complex the conformation of the binaphthyl chromophore probably approaches the strain free range, while in the trinuclear Cu complex a marked flattening of the dihedral angle between the two naphthyl rings occurs. Both complexes are active catalysts in the oxidation of L-/D-Dopa derivatives to quinones. High enantioselectivity is observed in the oxidation of L-/D-Dopa methyl ester catalyzed by the dinuclear Cu complex, which exhibits strong preference for the d enantiomer. The enantioselectivity is largely lost for the trinuclear Cu complex.     

Is styrene planar in liquid phases?

The proton NMR spectra of two (13)C-labeled isotopomers of styrene dissolved in two liquid crystalline solvents have been obtained and analyzed to yield four sets each of 24 dipolar couplings. These couplings were then used to investigate the structure of the ring and the ene fragments of the molecule, and the position of the maximum, phi(0), in the ring-ene bond rotational probability distribution. To do this, the effect on the dipolar couplings of small-amplitude vibrational motion was taken into account using vibrational wave functions calculated by molecular orbital and density functional methods. It is concluded that the NMR data are consistent with the ring fragment, averaged over the ring-ene rotation, planar, while the ene fragment is not. The value of phi(0) is found to be 18.0 degrees +/-0.2 degrees for the two solutions, compared with a value of 27 degrees calculated by the molecular method MP2/6-31G(*).     

A theoretical study of the lowest electronic states of azobenzene: the role of torsion coordinate in the cis–trans photoisomerization

In the present paper we report the results of a multiconfigurational computational study on potential-energy curves of azobenzene along the NN twisting to clarify the role of this coordinate in the decay of the S₂(*) and S₁(n*) states. We have found that there is a singlet state, S₃ at the trans geometry, on the basis of the doubly excited configuration n²*², that has a deep minimum at about 90° of twisting, where it is the lowest excited singlet state. The existence of this state provides an explanation for the short lifetime of S₂(*) and for the wavelength-dependence of azobenzene photochemistry. We have characterized the S₁(n*) state by calculating its vibrational frequencies, which are found to correspond to the recently observed transient Raman spectrum. We have also computed the potential-energy curve for the triplet T₁(n*) at the density functional theory B3LYP level, which indicates that in this state the isomerization occurs along the twisting coordinate.Acknowledgement The financial support from MIUR (project Modellistica delle proprietà spettroscopiche di sistemi molecolari complessi funds ex 60% and project Dinamiche molecolari in sistemi di interesse chimico funds ex 40%), from the University of Bologna (Funds for Selected Research Topics) is gratefully acknowledged.Contribution to the Jacopo Tomasi Honorary Issue     

BINOL catalyzed enantioselective addition of titanium phenylacetylide to aromatic ketones

An enantioselective addition of titanium phenylacetylide to ketones, promoted by BINOL, is described; this new enantioselective protocol gives high enantiomeric excess (up to 90% ee) with aromatic ketones using a simple procedure without pyrophoric or expensive reagents.     

Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

Structure-Reactivity Correlations in the Dissociative Hydrolysis of 2',4'-Dinitrophenyl 4-Hydroxy-X-benzenesulfonates

The hydrolysis reactions of several title esters in water at 60 degrees C follow the rate law k(obs) = (k(a) + k(b)[OH(-)])/(1 + a(H)/K(a)), where K(a) is the ionization constant of the hydroxy group of the ester and k(b) is the second-order rate constant for the S(N)2(S) attack of hydroxide ion on the ionized ester. Hammett and Br?nsted correlations are consistent with a previous proposal that the mechanism related to k(a) is dissociative. An unusual relationship between k(a) values and redox equilibrium constants for substituted quinones is found to hold: this finding further supports the dissociative nature of the pathway related to k(a).     

HMGB1–Carbenoxolone Interactions: Dynamics Insights from Combined Nuclear Magnetic Resonance and Molecular Dynamics

The interplay of protein dynamics and molecular recognition is of fundamental importance in biological processes. Atomic‐resolution insights into these phenomena may provide new opportunities for drug discovery. Herein, we have combined NMR relaxation experiments and residual dipolar coupling (RDC) measurements with molecular dynamics (MD) simulations to study the effects of the anti‐inflammatory drug carbenoxolone (CBNX) on the conformational properties and on the internal dynamics of a subdomain (box A) of high‐mobility group B protein (HMGB1). ¹⁵N relaxation data show that CBNX binding enhances the fast pico‐ to nanosecond motions of a loop and partially removes the internal motional anisotropy of the first two helices of box A. Dipolar wave analysis of amide RDC data shows that ligand binding induces helical distortions. In parallel, increased mobility of the loop upon ligand binding is highlighted by the essential dynamics analysis (EDA) of MD simulations. Moreover, simulations detect two possible orientations for CBNX, which induces two possible conformations of helix H3, one being similar to the free form and the second one causing a partial helical distortion. Finally, we introduce a new approach for the analysis of the internal coordination of protein residues that is consistent with experimental data and allows us to pinpoint which substructures of box A are dynamically affected by CBNX. The observations reported here may be useful for understanding the role of protein dynamics in binding at atomic resolution.     

First chemical study of anaspidean Syphonota geographica: structure of degraded sterols aplykurodinone-1 and -2

Two unprecedented degraded sterols, aplykurodinone-1 (1) and -2 (2), have been isolated from the skin of the marine anaspidean Syphonota geographica, collected along the coasts of Greece. The structures and the relative stereochemistry were established by spectroscopic analysis and confirmed by chemical correlation with related known compounds.     

Thermal reactions of tributyltin hydride with alpha-azido esters: unexpected intervention of tin triazene adducts under both nonradical and radical conditions

Thermal reaction of various alpha-azido esters with Bu(3)SnH in refluxing benzene results in smooth production of 3-(tributylstannyl)-1-triazene adducts affording cyclized 1,2,3-triazol-4-ones in preference to reduced amines and thence provides a new useful method for the preparation of these triazole derivatives. In the presence of AIBN the occurrence of triazene products still remains important or even exclusive and, consequently, generation of the expected stannylaminyl radicals is seriously limited. With 2-azidomalonates and alpha-azido-beta-keto esters stannyltriazenes can similarly occur in the absence of the radical initiator, but in the latter cases the ensuing triazenes undergo preferential cyclization onto the ketone moiety to give reactive hydroxytriazolines. Contrary to alpha-azido esters, in the presence of AIBN alpha-azido-beta-keto esters as well as azidomalonates give rise only to the usual stannylaminyl radicals. A possible explanation for the different behavior of the mono- and dicarbonyl azides in the presence of AIBN is put forward.     

Structural Analysis of a Helical Peptide Unfolding Pathway

The analysis of the folding mechanism in peptides adopting well‐defined secondary structure is fundamental to understand protein folding. Herein, we describe the thermal unfolding of a 15‐mer vascular endothelial growth factor mimicking α‐helical peptide (QK_L10A) through the combination of spectroscopic and computational analyses. In particular, on the basis of the temperature dependencies of QK_L10A H_α chemical shifts we show that the first phase of the thermal helix unfolding, ending at around 320 K, involves mainly the terminal regions. A second phase of the transition, ending at around 333 K, comprises the central helical region of the peptide. The determination of high‐resolution QK_L10A conformational preferences in water at 313 K allowed us to identify, at atomic resolution, one intermediate of the folding–unfolding pathway. Molecular dynamics simulations corroborate experimental observations detecting a stable central helical turn, which represents the most probable site for the helix nucleation in the folding direction. The data presented herein allows us to draw a folding–unfolding picture for the small peptide QK_L10A compatible with the nucleation–propagation model. This study, besides contributing to the basic field of peptide helix folding, is useful to gain an insight into the design of stable helical peptides, which could find applications as molecular scaffolds to target protein–protein interactions.