Electrochemically switchable hydrogen-bonded molecular shuttles

A series of [2]rotaxanes containing succinamide and naphthalimide hydrogen-bonding stations for a benzylic amide macrocycle is described. Electrochemical reduction and oxidation of the naphthalimide group alters its ability to form hydrogen bonds to the macrocycle to such a degree that redox processes can be used to switch the relative macrocycle-binding affinities of the two stations in a rotaxane by over 8 orders of magnitude. The structure of the neutral [2]rotaxane in solution is established by (1)H NMR spectroscopy and shows that the macrocycle exhibits remarkable positional integrity for the succinamide station in a variety of solvents. Cyclic voltammetry experiments allow the simultaneous stimulation and observation of a redox-induced dynamic process in the rotaxane which is both reversible and cyclable. Model compounds in which various conformational and co-conformational changes are prohibited demonstrate unequivocally that the redox response is the result of shuttling of the macrocycle between the two stations. At room temperature in tetrahydrofuran the electrochemically induced movement of the macrocycle between the two stations takes approximately 50 micros.     

Critical re-evaluation of the O-H bond dissociation enthalpy in phenol

The gas-phase O-H bond dissociation enthalpy, BDE, in phenol provides an essential benchmark for calibrating the O-H BDEs of other phenols, data which aids our understanding of the reactivities of phenols, such as their relevant antioxidant activities. In a recent review, the O-H BDE for phenol was presented as 90 +/- 3 kcal mol(-1) (Acc. Chem. Res. 2003, 36, 255-263). Due to the large margin of error, such a parameter cannot be used for dynamic interpretations nor can it be used as an anchor point in the development of more advanced computational models. We have reevaluated the existing experimental gas-phase data (thermolyses and ion chemistry). The large errors and variations in thermodynamic parameters associated with the gas-phase ion chemistry methods produce inconsistent results, but the thermolytic data has afforded a value of 87.0 +/- 0.5 kcal mol(-1). Next, the effect of solvent has been carefully scrutinized in four liquid-phase methods for measuring the O-H BDE in phenol: photoacoustic calorimetry, one-electron potential measurements, an electrochemical cycle, and radical equilibrium electron paramagnetic resonance (REqEPR). The enthalpic effect due to solvation, by, e.g., water, could be rigorously accounted for by means of an empirical model and the difference in hydrogen bond interactions of the solvent with phenol and the phenoxyl radical. For the REqEPR method, a second correction is required since the calibration standard, the O-H BDE in 2,4,6-tri-tert-butylphenol, had to be revised. From the gas-phase thermolysis data and three liquid-phase techniques (excluding the electrochemical cycle method), the present analysis yields a gas-phase BDE of 86.7 +/- 0.7 kcal mol(-1). The O-H BDE was also estimated by state-of-the-art computational approaches (G3, CBS-APNO, and CBS-QB3) providing a range from 86.4 to 87.7 kcal mol(-1). We therefore recommend that in the future, and until further refinement is possible, the gas-phase O-H BDE in phenol should be presented as 86.7 +/- 0.7 kcal mol(-1).     

Simultaneous determination of concentration,diffusion coefficient and number of electrons for electroactive species by combining suitable electroanalytical measurements

The electroanalytical method described for the simultaneous determination of concentration, the number of electrons involved in the redox process and diffusion coefficient is based on evaluation of the ratios between the currents recorded for the analyte and for an easily standardized reference species dissolved in the same medium. Three different electroanalytical techniques are used in which the currents exhibit, for two techniques at least, different dependences on both the diffusion coefficient and electron number. The approach is applicable to diffusion-controlled processes, regardless of the degree of reversibility involved. Reliability tests with electroactive organic compounds dissolved in dimethyl sulphoxide show that both accuracy and precision are within 10% depending on the chosen combination of techniques.     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.     

Versatile coordination chemistry towards multifunctional carbon nanotube nanohybrids

Dispersible single-walled carbon nanotubes grafted with poly(4-vinylpyridine), SWNT-PVP, were tested in coordination assays with zinc tetraphenylporphyrin (ZnP). Kinetic and spectroscopic evidence corroborates the successful formation of a SWNT-PVPZnP nanohybrid. Within this SWNT-PVPZnP nanohybrid, static electron-transfer quenching (2.0+/-0.1) x 10(9) s(-1) converts the photoexcited-ZnP chromophore into a radical-ion-pair state with a microsecond lifetime, namely one-electron oxidized-ZnP and reduced-SWNT.     

Synthesis of Aminopyridines and Aminopyridones by Cobalt‐Catalyzed [2+2+2] Cycloadditions Involving Yne‐Ynamides: Scope,Limitations, and Mechanistic Insights

An in‐depth study of the cobalt‐catalyzed [2+2+2] cycloaddition between yne‐ynamides and nitriles to afford aminopyridines has been carried out. About 30 nitriles exhibiting a broad range of steric demand and electronic properties have been evaluated, some of which open new perspectives in metal‐catalyzed arene formation. In particular, the use of [CpCo(CO)(dmfu)] (dmfu=dimethyl fumarate) as a precatalyst made possible the incorporation of electron‐deficient nitriles into the pyridine core. Modification of the substitution pattern at the yne‐ynamide allows the regioselectivity to be switched toward 3‐ or 4‐aminopyridines. Application of this synthetic methodology to the construction of the aminopyridone framework using a yne‐ynamide and an isocyanate was also briefly examined. DFT computations suggest that 3‐aminopyridines are formed by formal [4+2] cycloaddition between the nitrile and the intermediate cobaltacyclopentadiene, whereas 4‐aminopyridines arise from an insertion pathway.     

Implications of the LHCb evidence for charm CP violation

The LHCb collaboration recently announced preliminary evidence for CP violation in D meson decays. We discuss this result in the context of the standard model (SM), as well as its extensions. In the absence of reliable methods to evaluate the hadronic matrix elements involved, we can only estimate qualitatively the magnitude of the non-SM tree level operators required to generate the observed central value. In the context of an effective theory, we list the operators that can give rise to the measured CP violation and investigate constraints on them from other processes.     

Surfactant Hydrogels for the Dispersion of Carbon‐Nanotube‐Based Catalysts

Novel hydrogel phases based on positively charged and zwitterionic surfactants, namely, N‐[p‐(n‐dodecyloxybenzyl)]‐N,N,N‐trimethylammonium bromide (pDOTABr) and p‐dodecyloxybenzyldimethylamine oxide (pDOAO), which combine pristine carbon nanotubes (CNTs), were obtained, thus leading to stable dispersions and enhanced cross‐linked networks. The composite hydrogel featuring a well‐defined nanostructured morphology and an overall positively charged surface was shown to efficiently immobilise a polyanionic and redox‐active tetraruthenium‐substituted polyoxometalate (Ru₄POM) by complementary charge interactions. The resulting hybrid gel has been characterised by electron microscopy techniques, whereas the electrostatic‐directed assembly has been monitored by means of fluorescence spectroscopy and ζ‐potential tests. This protocol offers a straightforward supramolecular strategy for the design of novel aqueous‐based electrocatalytic soft materials, thereby improving the processability of CNTs while tuning their interfacial decoration with multiple catalytic domains. Electrochemical evidence confirms that the activity of the catalyst is preserved within the gel media.     

Thermally Induced Synthesis of Anthracene-, Pyrene- and Naphthalene-Fused Porphyrins

The synthesis of π-extended porphyrins containing anthracenyl moieties still represents an important challenge. Here, we report on the synthesis of a series of unsubstituted naphthyl-, pyrenyl- and anthracenyl-fused zinc porphyrin derivatives. To this aim, meso-substitued porphyrins are synthesized and the fusion of the PAHs (Polycyclic Aromatic Hydrocarbon) on the β-positions are performed through thermally induced dehydro-aromatization. The fused zinc-porphyrin derivatives are fully characterized and their optical absorption and photoluminescence properties are reported. We also demonstrate that zinc can be removed from the porphyrin core, giving rise to pure C, H, N materials. This work constitutes the first step towards the synthesis of the fully-fused tetra-anthracenylporphyrin.