Microfluidics made of yarns and knots: from fundamental properties to simple networks and operations

We present and characterize cotton yarn and knots as building blocks for making microfluidic circuits from the bottom up. The yarn used is made up of 200-300 fibres, each with a lumen. Liquid applied at the extremity of the yarn spontaneously wets the yarn, and the wetted length increases linearly over time in untreated yarn, but progresses according to a square root relationship as described by Washburn's equation upon plasma activation of the yarn. Knots are proposed for combining, mixing and splitting streams of fluids. Interestingly, the topology of the knot controls the mixing ratio of two inlet streams into two outlet yarns, and thus the ratio can be adjusted by choosing a specific knot. The flow resistance of a knot is shown to depend on the force used to tighten it and the flow resistance rapidly increases for single-stranded knots, but remains low for double-stranded knots. Finally, a serial dilutor is made with a web made of yarns and double-stranded overhand knots. These results suggest that yarn and knots may be used to build low cost microfluidic circuits.     

Rapid electrophoretic recovery of DNA from dried blood spots

Large‐scale genetic screening of neonatal dried blood spots for episomal DNA has a great potential to lower patient mortality and morbidity through early diagnosis of primary immunodeficiencies. However, DNA extraction from the surface of dried blood spots remains one of the most time consuming, costly, and labor‐intensive parts of DNA analysis. In the present study, we developed and optimized a rapid methodology using only 50 V and heat to extract episomal DNA from dried blood spots prepared from diagnostic cord blood samples. This electric field DNA extraction is the first methodology to use an electric field to extract episomal DNA from a dried blood spot. This 25‐minute procedure has one of the lowest times for the extraction of episomal DNA found within the literature and this novel procedure not only negates the need for costly treatment and wash steps, but reduces the time of manual procedures by more than 30 min while retaining the 75–80% of the yield. Combined with real‐time PCR, this novel method of electric field extraction not only provides an effective tool for the large scale genetic analysis of neonates, but a key step forward in the simplification and standardization of diagnostic testing.     

Bio‐reduction of Redox‐Sensitive Albumin Conjugates in FcRn‐Expressing Cells

Disulfide‐containing IgG‐, Fc‐, or albumin‐based prodrugs that rely on FcRn‐trafficking by endothelial cells for prolonged circulation in the body might be hampered by premature bio‐reduction processes during FcRn‐mediated recycling events. A detailed bio‐reduction analysis of redox‐sensitive albumin conjugates in two FcRn‐expressing cell lines has been performed. The obtained results indicate that the FcRn‐mediated recycling pathway is not (or is only poorly) bio‐reducing.     

Self-assembly of small polycyclic aromatic hydrocarbons on graphite: a combined scanning tunneling microscopy and theoretical approach

Self-assembled monolayers of chrysene and indene on graphite have been observed and characterized individually with scanning tunneling microscopy (STM) at 80 K under low-temperature, ultrahigh vacuum conditions. These molecules are small, polycyclic aromatic hydrocarbons (PAHs) containing no alkyl chains or functional groups that are known to promote two-dimensional self-assembly. Energy minimization and molecular dynamics simulations performed for small groups of the molecules physisorbed on graphite provide insight into the monolayer structure and forces that drive the self-assembly. The adsorption energy for a single chrysene molecule on a model graphite substrate is calculated to be 32 kcal/mol, while that for indene is 17 kcal/mol. Two distinct monolayer structures have been observed for chrysene, corresponding to high- and low-density assemblies. High-resolution STM images taken of chrysene with different bias polarities reveal distinct nodal structure that is characteristic of the molecular electronic state(s) mediating the tunneling process. Density functional theory calculations are utilized in the assignment of the observed electronic states and possible tunneling mechanism. These results are discussed within the context of PAH and soot particle formation, because both chrysene and indene are known reaction products from the combustion of small hydrocarbons. They are also of fundamental interest in the fields of nanotechnology and molecular electronics.     

Thermal behavior of some new chromium complexes with potential biological importance

Summary This paper reports the investigation of the thermal stability of three new complexes of Cr(III) with acrylate anion, [Cr₂(C₃H₃O₂)₄(OH)₂(H₂O)₄], [Cr₃O(C₃H₃O₂)₆(C₃H₄O₂)₃](C₃H₃O₂)×5H₂O and [Cr₂(C₃H₃O₂)₅(OH)] ×2H₂O, respectively. This type of complexes is important in proper carbohydrate and lipid metabolism of mammals. The thermal decomposition steps were evidenced. The thermal transformations are complex processes according to TG and DTG curves including dehydration and oxidative degradation of acrylate ion processes. The final product of decomposition is the chromium(III) oxide.     

Kalihinols from two Acanthella cavernosa sponges: inhibitors of bacterial folate biosynthesis

Acanthella spp. sponges have been prolific sources of highly functionalized diterpene antibiotics. Two Acanthella cavernosa sponges were investigated based on the activity of their extracts in a screen designed to detect bacterial folate biosynthesis inhibitors. Bacillus subtilis PY79 strain harboring a lacZ reporter gene fusion to a trimethoprim-responsive promoter (PpanB) was used for the screen. The ability of kalihinols to inhibit bacterial folate biosynthesis was investigated resulting in preliminary structure activity relationships. Eight kalihinol type diterpenes were isolated from two Philippine Acanthella cavernosa specimens including two new 10- and 15-formamido-kalihinol F analogs.     

The dimesitylboron group in organic synthesis 8. Preparations of 1,3-diols from oxiranes

Alkyldimesitylboranes, yield anions¹, Mes₂B$\text{C}$HR, that on reaction with oxiranes followed by oxidation give 1,3-diols. These anions are thus the operational equivalent of R$\text{C}$HOH. The scope and limitations of the new process are delineated.     

Kinetics of methane combustion on Fe2O3/TiO2 catalysts

The objective of this work was to study the kinetics of methane combustion for a series of Fe₂O₃/TiO₂ catalysts. An increase in activity is observed as iron loading increases, and can be attributed to an increase of surface coverage by Fe₂O₃ species. Kinetic studies revealed that the reaction orders with respect to methane, oxygen, carbon dioxide and water are 1, 0, 0 and -1 respectively. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis and photoluminescence of titania nanoparticle arrays templated by block-copolymer thin films.

High-density arrays of titania nanoparticles were prepared using a polystyrene-b-poly(ethylene oxide) block copolymer (PS-b-PEO) as a template and a titanium tetraisopropoxide based sol-gel precursor as titania source via a spin-coating method. The hydrophilic titania sol-gel precursor was selectively incorporated into hydrophilic PEO domains of PS-b-PEO and form titania nanoparticle arrays, due to a microphase separation between the PS block and the sol-gel/PEO phase. Field emission scanning electron microscopy (FESEM) and scanning probe microscopy (SPM) images showed that the uniformity and long-range order of the titania/PEO domains improved with increasing sol-gel precursor amount. Grazing incidence small-angle X-ray scattering (GISAXS) results indicate that the ordered structures exist over large length scales. Titania nanocrystal arrays of anatase modification were obtained by calcination at 600 degrees C for 4 h. After calcination, separated particles were observed for low and medium amounts of sol-gel precursors. Films with higher precursor amounts showed wormlike structures due to the aggregation between neighboring particles. Removal of the polymer matrix via UV treatment leads to highly ordered arrays of amorphous titania while retaining the domain size and interparticle distance initially present in the hybrid films. Photoluminescence (PL) properties were investigated for samples before and after calcination. The PL intensity increases with the increasing amount of sol-gel precursor. Bands at 412 nm were ascribed to self-trapped exitons and bands at 461 and 502 nm to oxygen vacancies, respectively. Uncalcined or UV-treated samples also showed PL properties similar to calcined samples, indicating that the local environment of the titanium atoms is similar to the environment of the crystalline anatase modification.