Direct copolymerization of sulfonated poly(phthalazinone arylene ether)s for proton‐exchange‐membrane materials

Sulfonated poly(phthalazinone ether ketone) (SPPEK) copolymers and sulfonated poly(phthalazinone ether sulfone) (SPPES) copolymers containing pendant sodium sulfonate groups were prepared by direct copolymerization. The reaction of disodium 3,3′‐disulfonate‐4,4′‐difluorobenzophenone (SDFB‐Na), 4,4′‐difluorobenzophenone (DFB), and 4‐(4‐hydroxyphenyl)‐1(2H)‐phthalazinone (DHPZ) at 170 °C in N‐methyl‐2‐pyrrolidione containing anhydrous potassium carbonate gave SPPEKs. SPPESs were similarly obtained with 3,3′‐disulfonate‐4,4′‐difluorophenyl sulfone, 4‐fluorophenyl sulfone (DFS), and DHPZ as monomers. The sulfonic acid groups, being on deactivated positions of the polymer backbone, were expected to be hydrolytically more stable than postsulfonated polymers. Fourier transform infrared and ¹H NMR were used to characterize the structures and degrees of sulfonation of the sulfonated polymers. Membrane films of SPPEKs with SDFB‐Na/DFB molar feed ratios of up to 60/40 and SPPESs with sulfonated 4‐fluorophenyl sulfone/DFS molar feed ratios of up to 50/50 were cast from N,N‐dimethylacetamide polymer solutions. Membrane films in acid form were then obtained by the treatment of the sodium‐form membrane films in 2 N sulfuric acid at room temperature. An increase in the number of sulfonate groups in the copolymers resulted in an increased glass‐transition temperature and enhanced membrane hydrophilicity. The sodium‐form copolymers were thermally more stable than their acid forms. The proton conductivities of the acid‐form copolymers with sulfonated monomer/unsulfonated monomer molar feed ratios of 0.5 and 0.6 were higher than 10^?2 S/cm and increased with temperature; they were less temperature‐dependent than those of the postsulfonated products. SPPESH‐50 showed higher conductivity than the corresponding postsulfonated poly(phthalazinone ether sulfone). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2731–2742, 2003     

Extended shell-model calculations for the A = 6 nuclei

Extended shell-model calculations for the A = 6 nuclei using the Sussex matrix elements and the Gogny et al. potential are presented. The results are discussed in connection with those obtained in the framework of the lowest order shell-model configurations.     

Variations sur un thème de Mahler

Sans résumé     

Are defect models consistent with the entropy and specific heat of glass formers?

We show that pointlike defect model of glasses cannot explain the thermodynamic properties of glass formers, as for example, the excess specific heat close to the glass transition, contrary to the claim of Garrahan and Chandler [Proc. Natl. Acad. Sci. U.S.A. 100, 9710 (2003)]. More general models and approaches in terms of extended defects are also discussed.     

Refinements to the diastereoisomer-specific method for the analysis of hexabromocyclododecane

The emergence of hexabromocyclododecane (HBCD) as a bromine-based flame retardant of concern is partly attributable to recent measurements on the environmental occurrence of the individual diastereoisomers (alpha, beta and gamma). These measurements were fuelled by a newly developed liquid chromatography/tandem mass spectrometric (LC/MS/MS)-based analytical method. However, in the course of our recent studies on the environmental fate and behaviour of the diastereoisomers of HBCD, some interesting features of the LC/MS/MS method became apparent. For example, the ion signal of the native ions was found to be dependent on the final extract volume. This was true for both biotic and sediment samples and was found to arise from the suppression of the ion signal due to endogenous material in the extracts that escape clean-up. We have also found differences in the stability of the diastereoisomers in different solvents. If left unaccounted for, both factors can compromise analytical measurement data. By way of a series of controlled experiments conducted at our two laboratories [Department of Fisheries & Oceans Canada (DFO) and Environment Canada (EC)], we illustrate these features and demonstrate that use of newly synthesized labelled HBCD isomers [(13-carbon (13C) and deuterium (d18)] can minimize and often circumvent matrix-related effects.     

Maturation grade of coals as revealed by Raman spectroscopy: progress and problems

The present study questions the sensitivity and the accuracy of Raman spectroscopy as a tool for determining the maturity of natural organic matter (NOM). It focuses on the definition of optimized experimental parameters in order to maximize the quality of the Raman signal and control the accuracy and reproducibility of measurements. A series of 11 coals has been investigated, sampling a wide maturity range (2-7% vitrinite reflectance VR). The role of experimental parameters is first investigated. An excitation wavelength of 514.5 nm gives better results than 457.9 and 632.8 nm, minimizing the fluorescence background observed in the spectra of low-rank coals. Both Raman and fluorescence spectra were investigated with time-resolved experiments in air and argon. These data show that fluorescence and Raman spectra are sensitive to acquisition time and laser power parameters, and reveal a physicochemical instability of the samples under laser irradiation, mostly due to photo-oxidation processes. These data clearly show that the experiments, especially in air, should be performed with strictly constant acquisition parameters. In addition, the results of a whole series of coal measurements performed in air under constant experimental conditions show that Raman spectroscopy is definitely sensitive to the maturity of coal samples with VR> approximately 1%. The most sensitive spectral maturity tracers are the width of the D-band (FWHM-D), the ratio of the peak intensities of the D- and G-bands (I(D)/I(G)), the normalized ratio of the band integrated intensities A(D)/[A(D)+A(G)] for the maturity range VR=3-7% and the width of the G-band (FWHM-G) for VR=1-5%. However, the accuracy and reproducibility are definitely weaker in such measurements compared to the standard VR. Future work must solve the problem of sample stability under laser irradiation, and greatly increase the number of samples to improve the statistical significance of the results.     

Pyridines as precursors of conjugated diene pheromones (II) : Stereoselective synthesis of (7e, 9z)-dodecadien-1-yl acetate,sex pheromone of lobesia botrana

2-Alkyl pyridines are convenient precursors of (E, Z) diene ammonium salts which can be substituted by activated Grignard reagents or a lithium diorgano cuprate reagent. The synthesis of (7E, 9Z) dodecadien-1-yl acetate, sex pheromone of $\text{Lobesia botrana}$, is an illustration of this methodology.     

Propriétés de lissité de certaines normes

Sans résumé