tert‐Butyl (6S)‐4‐hydroxy‐6‐isobutyl‐2‐oxo‐1,2,5,6‐tetra­hydropyridine‐1‐carboxyl­ate and tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxopiperidine‐1‐carboxyl­ate

X‐ray studies reveal that tert‐butyl (6S)‐6‐iso­butyl‐2,4‐dioxo­piperidine‐1‐carboxyl­ate occurs in the 4‐enol form, viz. tert‐butyl (6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo‐1,2,5,6‐tetra­hydropyri­dine‐1‐carboxyl­ate, C₁₄H₂₃NO₄, when crystals are grown from a mixture of di­chloro­methane and pentane, and has an axial orientation of the iso­butyl side chain at the 6‐position of the piperidine ring. Reduction of the keto functionality leads predominantly to the corresponding β‐hydroxy­lated δ‐lactam, tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo­piperidine‐1‐car­boxyl­ate, C₁₄H₂₅NO₄, with a cis configuration of the 4‐hydroxy and 6‐iso­butyl groups. The two compounds show similar molecular packing driven by strong O—H⋯O=C hydrogen bonds, leading to infinite chains in the crystal structure.     

Transverse displacement at total reflection near the grazing angle: a way to discriminate between theories

The transverse shift is observed and precisely measured at total internal reflection on a dielectric interface for a circularly polarized light beam when the incident angle is scanned from the critical angle up to the grazing angle close to 90°. The experimental results show with no doubt that the transverse displacement exists far away from the critical angle and only vanishes at grazing angle. A comparison with theories also allows a discrimination between the most different theoretical models traditionally used to interpret physically this effect.     

Total synthesis of the marine cytotoxic caulibugulones A-D

We report the first total synthesis of the cytotoxic marine alkaloids caulibugulone A-D. This synthesis confirmed the assigned structures and provided sufficient material for further biological testing.     

Reactivity of polyesters in glycolysis reactions: Unexpected effect of the chemical structure of the polyester glycolic unit

Kinetic studies of PET glycolysis by diethylene glycol (DEG), dipropylene glycol (DPG), glycerol (Gly) and mixtures of these glycols have shown, in a previous study, that the order of reactivity of the glycols differs according to the conditions of temperature and catalysis. Indeed, their global reactivity depends both on their chemical reactivity and physico-chemical properties.Glycolysis of model polyesters which are liquid at the reaction temperature, which allows us to overcome the problem of the polyesters' solubility, were studied to compare the chemical reactivity of these glycols. Three oligoesters were synthesized from dimethyl terephthalate and three different glycols namely triethylene glycol, ethylene glycol and hexanediol to form, respectively, PE₃T, OET and PTHD.Results showed that the order of reactivity of the glycols is the same for PET, OET and PTHD but different for PE₃T. Indeed, DPG without catalyst has a particular and unexpected behaviour: its reactivity seems to be strongly influenced by the presence of oxygen atoms in the chain.     

First measurement of the ϱ spectral function in nuclear collisions

The NA60 experiment at the CERN SPS has studied low-mass muon pairs in 158 A GeV In–In collisions. A strong excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size close to 400000 events and the good mass resolution of about 2% made it possible to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum shows some non-trivial centrality dependence, but is largely consistent with a dominant contribution from π⁺π^-→ϱ→μ⁺μ^- annihilation. The associated ϱ spectral function exhibits considerable broadening, but essentially no shift in mass. The p_T-differential mass spectra show the excess to be much stronger at low p_T than at high p_T. The results are compared to theoretical model predictions; they tend to rule out models linking hadron masses directly to the chiral condensate. PACS 25.75.-q; 12.38.Mh; 13.85.Qk     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

A New Differential Method Applied to the Study of Arbitrary Cross Section Microstructured Optical Fibers

The present work adapts a recent grating theory called “Fast Fourier factorization” to cylindrical coordinates in order to study microstructured optical fibers (MOFs). Compared with the classical differential method, this new differential method takes into account the truncation of Fourier series and the discontinuities of the fields across the diffracting surface with the help of new factorization rules. The main advantage of this method is that the directrix of the diffracting cylindrical surface is arbitrary and permits anisotropic and inhomogeneous media although its numerical application needs longer computation time, compared with other well-known numerical methods. The S-propagation algorithm is used to avoid numerical contaminations. The numerical results are validated and compared with the well-established Multipole method in the case of a MOF with six circular cylinders. Further, a new cross-sectional profile (with sectorial inclusions) that the Multipole method cannot consider is studied.     

DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

The synthesis of imidazole-2-thione nucleosides

Ribosylation of the trimethylsilyl derivative ( 1b ) of imidazole-2-thione ( 1a ) using either stannic chloride or silver perchlorate as catalyst resulted in the formation of the acylated derivatives of 1-(β-D-ribofuranosyl)imidazole-2-thione ( 3c ) and 1,3-di-(β-D-ribofuranosyl)imidazole-2-thione ( 4c ) with the latter predominating ( 4c:3c , ca. 2:1 ). The diribosylated nucleoside 4c was shown to be the N,N-disubstituted product rather than the N,S-disubstituted product by ¹H nmr and ¹³C nmr spectroscopy. Employment of the iodine-catalyzed fusion procedure reversed the aforementioned product ratios and provided the monoriboside 3c in excellent yield. When the trimethylsilyl derivative ( 5b ) of 2-methylthioimidazole ( 5a ) was reacted with 2,3,5-tri-O-benzoyl-D-ribofuranosyl bromide ( 2d ) in acetonitrile, the major product was 1,3-di-(2,3,5-tri-O-benzoyl-β-D-ribofuranosyl)-imidazole-2-thione ( 4b ). The formation of 4b in this reaction is thought to arise via the Hilbert-Johnson mechanism.