Synthesis of silica–silver wires by a sol–gel technique

SiO₂–Ag wires were synthesized by a sol–gel technique. A two step approach was followed, focusing mainly on the effect of acid concentration on the first stage and processing temperature on the second. This acid-catalyzed reaction on the first stage yielded SiO₂–AgCl wires with diameters as low as 800 nm average, and lengths ranging up to 100 μm, as determined by LV-SEM and TEM. A thermal treatment at different temperatures on the second step, under H₂ atmosphere, yields silica–silver unidirectional structures. The chemical composition of these structures was determined by EDS, indicating the presence of Si, O and Ag. The transformation of the wires as a function of temperature under reducing atmosphere was followed by electron microscopy analysis. At 400 °C and above the silica starts to cover the reduced silver while maintaining the unidirectional conformation, suggesting a tendency to form silver wires covered by a silica layer.     

Critical review on analytical methods for biodiesel characterization

Biodiesel is an alternative fuel composed of mono-alkyl esters and obtained mainly from the base-catalyzed transesterification reaction of oils or fats. Its use (pure or blended) does not demand any modification in the diesel engine and in the existing fuel distribution and storage infrastructure. Moreover, biodiesel has a high energetic yield, fixes the solar energy and contains insignificant amounts of sulphur. Therefore, biodiesel is currently the best substitute for fossil diesel fuel.Besides mono-alkyl esters, glycerol (main co-product), alcohol, catalyst, free fatty acids, tri-, di- and monoglycerides compose the final mixture of biodiesel production process. These and other kinds of contaminants can lead to severe operational and environmental problems. Therefore, the quality control of biodiesel is greatly significant to the success of its commercialization and market acceptance. Some important issues on the biodiesel quality control involve the monitoring of transesterification reaction, the quantification of mono-alkyl esters and free- and bonded glycerol as well as determination of residual catalysts and alcohol. Moreover, the determination of blend levels is another key aspect of biodiesel analyses. Chromatography and spectroscopy are the analytical methods most used for the biodiesel characterization, but procedures based on physical properties are also available.Previously, a review on analytical methods used to evaluate biodiesel quality was written by Knothe. Due to the importance of this field, we made an update of Knothes’ review. Therefore, in this paper, we will describe new developments in biodiesel analyses and some references showed in Knothes’ paper. Specially, we will describe analytical methods used for quantification of glycerol, mono-, di-, triglycerides, methanol, water, Na, K, P, and steroids in biodiesel or along the transesterification reaction. Also, the determination of biodiesel content in blends and some physicochemical parameters are discussed. At the end, we will assess the available techniques and point out some improvements on analytical methods for biodiesel characterization.     

Quantification of Cyclobutane Pyrimidine Dimers Induced by UVB Radiation in Conidia of the Fungi Aspergillus fumigatus,Aspergillus nidulans,Metarhizium acridum and Metarhizium robertsii

Conidia are responsible for reproduction, dispersal, environmental persistence and host infection of many fungal species. One of the main environmental factors that can kill and/or damage conidia is solar UV radiation. Cyclobutane pyrimidine dimers (CPD) are the major DNA photoproducts induced by UVB. We examined the conidial germination kinetics and the occurrence of CPD in DNA of conidia exposed to different doses of UVB radiation. Conidia of Aspergillus fumigatus, Aspergillus nidulans and Metarhizium acridum were exposed to UVB doses of 0.9, 1.8, 3.6 and 5.4 kJ m⁻². CPD were quantified using T4 endonuclease V and alkaline agarose gel electrophoresis. Most of the doses were sublethal for all three species. Exposures to UVB delayed conidial germination and the delays were directly related both to UVB doses and CPD frequencies. The frequencies of dimers also were linear and directly proportional to the UVB doses, but the CPD yields differed among species. We also evaluated the impact of conidial pigmentation on germination and CPD induction on Metarhizium robertsii. The frequency of dimers in an albino mutant was approximately 10 times higher than of its green wild-type parent strain after exposure to a sublethal dose (1.8 kJ m⁻²) of UVB radiation.     

Determination of formaldehyde by flow injection analysis with spectrophotometric detection exploiting brilliant green-sulphite reaction

A method for the determination of formaldehyde by flow injection analysis with spectrophotometric detection is proposed, based on retarding the reaction between brilliant green and sulphite by the addition of formaldehyde; this was investigated for formaldehyde quantification in extracts from wood-based panels. For the first time, a heating step was explored, providing a sample throughput of 50 analyses per hour, with a limit of detection of 0.02 mg L^?1 and linearity of 0.20–3.0 mg L^?1, which was adequate for the expected range of formaldehyde concentration in the extracts. The mean recovery observed for actual samples was in the range of 92–106 %, with a maximum relative standard deviation of 6.0 %. The paired t-test revealed no significant difference between this method and the official Nash method, demonstrating an appropriate accuracy and precision; the method is proposed as a simple, fast and inexpensive alternative for the routine determination of formaldehyde in an aqueous medium.     

NMR study of styrene-butadiene rubber (SBR) and TiO2 nanocomposites

The chemical behavior of styrene-butadiene rubber (SBR) and of the SBR/TiO₂ and photodegraded SBR/TiO₂ nanocomposites was investigated through nuclear magnetic resonance spectroscopy (NMR) in the solid state with magic angle spinning (MAS). The ¹³C cross polarization/magic angle spinning (CP/MAS) routine spectrum allowed us to obtain information on the polymer microstructure and also to evaluate the domain mobilities. The variation contact time and the proton spin-lattice relaxation time in the rotating frame (T₁ρH) were determinant factors to evaluate the dynamic molecular motion. The NMR spectrum of the nanocomposites was dislocated 5 ppm to higher chemical shift, indicating the presence of a strong interaction between the polymer chains and the TiO₂ nanoparticles. The VTC experiment showed a rigid domain in the SBR/TiO₂ photodegraded nanocomposite due to cross-linking reactions.     

Baseline resolution of isomers by traveling wave ion mobility mass spectrometry: investigating the eff ects of polarizable drift gases and ionic charge distribution

We have studied the behavior of isomers and analogues by traveling wave ion mobility mass spectrometry (TWIM‐MS) using drift‐gases with varying masses and polarizabilities. Despite the reduced length of the cell (18 cm), a pair of constitutional isomers, N‐butylaniline and para‐butylaniline, with theoretical collision cross‐section values in helium (Ω_He) differing by as little as 1.2 Ų (1.5%) but possessing contrasting charge distribution, showed baseline peak‐to‐peak resolution (R_p‐p) for their protonated molecules, using carbon dioxide (CO₂), nitrous oxide (N₂O) and ethene (C₂H₄) as the TWIM drift‐gas. Near baseline R_p‐p was also obtained in CO₂ for a group of protonated haloanilines (para‐chloroaniline, para‐bromoaniline and para‐iodoaniline) which display contrasting masses and theoretical Ω_He, which differ by as much as 15.7 Ų (19.5%) but similar charge distributions. The deprotonated isomeric pair of trans‐oleic acid and cis‐oleic acid possessing nearly identical theoretical Ω_He and Ω_N2 as well as similar charge distributions, remained unresolved. Interestingly, an inversion of drift‐times were observed for the 1,3‐dialkylimidazolium ions when comparing He, N₂ and N₂O. Using density functional theory as a means of examining the ions electronic structure, and He and N₂‐based trajectory method algorithm, we discuss the effect of the long‐range charge induced dipole attractive and short‐range Van der Waals forces involved in the TWIM separation in drift‐gases of differing polarizabilities. We therefore propose that examining the electronic structure of the ions under investigation may potentially indicate whether the use of more polarizable drift‐gases could improve separation and the overall success of TWIM‐MS analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Fe3O4/Graphene Composite Anode Material for Fast-Charging Li-Ion Batteries

Composite anode material based on Fe₃O₄ and reduced graphene oxide is prepared by base-catalysed co-precipitation and sonochemical dispersion. Structural and morphological characterizations demonstrate an effective and homogeneous embedding of Fe₃O₄ nanoparticles in the carbonaceous matrix. Electrochemical characterization highlights specific capacities higher than 1000 mAh g⁻¹ at 1C, while a capacity of 980 mAhg⁻¹ is retained at 4C, with outstanding cycling stability. These results demonstrate a synergistic effect by nanosize morphology of Fe₃O₄ and inter-particle conductivity of graphene nanosheets, which also contribute to enhancing the mechanical and cycling stability of the electrode. The outstanding capacity delivered at high rates suggests a possible application of the anode material for high-power systems.     

New Estrone Oxime Derivatives: Synthesis,Cytotoxic Evaluation and Docking Studies

The interest in the introduction of the oxime group in molecules aiming to improve their biological effects is increasing. This work aimed to develop new steroidal oximes of the estrane series with potential antitumor interest. For this, several oximes were synthesized by reaction of hydroxylamine with the 17-ketone of estrone derivatives. Then, their cytotoxicity was evaluated in six cell lines. An estrogenicity assay, a cell cycle distribution analysis and a fluorescence microscopy study with Hoechst 3358 staining were performed with the most promising compound. In addition, molecular docking studies against estrogen receptor α, steroid sulfatase, 17β-hydroxysteroid dehydrogenase type 1 and β-tubulin were also accomplished. The 2-nitroestrone oxime showed higher cytotoxicity than the parent compound on MCF-7 cancer cells. Furthermore, the oximes bearing halogen groups in A-ring evidenced selectivity for HepaRG cells. Remarkably, the Δ^9,11-estrone oxime was the most cytotoxic and arrested LNCaP cells in the G₂/M phase. Fluorescence microscopy studies showed the presence of condensed DNA typical of prophase and condensed and fragmented nuclei characteristic of apoptosis. However, this oxime promoted the proliferation of T47-D cells. Interestingly, molecular docking studies estimated a strong interaction between Δ^9,11-estrone oxime and estrogen receptor α and β-tubulin, which may account for the described effects.     

Positive numerical solution for a nonarbitrage liquidity model using nonstandard finite difference schemes

In this article, we construct a numerical method based on a nonstandard finite difference scheme to solve numerically a nonarbitrage liquidity model with observable parameters for derivatives. This nonlinear model considers that the parameters involved are observable from order book data. The proposed numerical method use a exact difference scheme in the linear convection‐reaction term, and the spatial derivative is approximated using a nonstandard finite difference scheme. It is shown that the proposed numerical scheme preserves the positivity as well as stability and consistence. To illustrate the accuracy of the method, the numerical results are compared with those produced by other methods. © 2013 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 30: 210‐221, 2014     

Homotopy classification of projective convex sets

A subset of projective space is called convex if its intersection with every line is connected. The complement of a projective convex set is again convex. We prove that for any projective convex set there exists a pair of complementary projective subspaces, one contained in the convex set and the other in its complement. This yields their classification up to homotopy.