The oxidation of Fe(111)

The oxidation of Fe(111) was studied using Auger electron spectroscopy (AES), low energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), ion scattering spectroscopy (ISS) and scanning tunnelling microscopy (STM). Oxidation of the crystal was found to be a very fast process, even at 200 K, and the Auger O signal saturation level is reached within ~ 50 × 10^? 6 mbar s. Annealing the oxidised surface at 773 K causes a significant decline in apparent surface oxygen concentration and produces a clear (6 × 6) LEED pattern, whereas after oxidation at ambient temperature no pattern was observed. STM results indicate that the oxygen signal was reduced due to the nucleation of large, but sparsely distributed oxide islands, leaving mainly the smooth (6 × 6) structure between the islands. The reactivity of the (6 × 6) layer towards methanol was investigated using temperature programmed desorption (TPD), which showed mainly decomposition to CO and CO₂, due to the production of formate intermediates on the surface. Interestingly, this removes the (6 × 6) structure by reduction, but it can be reformed from the sink of oxygen present in the large oxide islands simply by annealing at 773 K for a few minutes. The (6 × 6) appears to be a relatively stable, pseudo-oxide phase, that may be useful as a model oxide surface.     

Some aerodynamic and acoustic characteristicsof acute laryngitis

The purpose of the present study was to describe the effects ofacute laryngitis on some aerodynamic, acoustic, and perceptual measures. Eleven subjects with diagnosed acute laryngitis due to upper respiratory infection were recorded during a laryngitic episode and 1 week to 10 days after amelioration of the laryngitic condition. Fundamental frequency values, collapsed across the five vowels, were significantly reduced in the laryngitic compared with the normal speaking condition. The decrease in fundamental frequency associated with acute laryngitis suggests an increase in the mass of the vocal folds. In addition, aerodynamic values differed significantly for the laryngitic condition compared with the normal speaking condition, suggesting the presence of laryngeal hypofunction. Perceptual data indicated that speakers in the laryngitic condition were judged to have a hoarse voice when compared with the normal speaking condition.     

Yb∶Y_3Al_5O_(12)/Y_3Al_5O_(12)复合晶体的制作和光谱性能

采用热键合技术,制作中运用不同的工艺参量制作出12片Yb∶Y3Al5O12/Y3Al5O12(Yb∶YAG/YAG)复合晶体。利用偏光显微镜对其键合界面进行了观察,研究了样品的透射光谱,从而确定出复合晶体合适的制作工艺。通过透射光谱的形状和透射率来表征复合晶体键合界面的质量。研究表明Yb∶YAG/YAG复合晶体键合质量较好,可实现一体化。     

CHIROPTICAL PROPERTIES OF 1-DEOXY-1-THIOGALACTOPYRANOSIDES

Abstract

Continuing our studies of optically active sulfides we have investigated flexible systems incorporating the 1.3-O,S-chromophore, e.q., alkyl α-and B-D-thiogalactopyranosides and their tetraacetates. Although most substances were known from the literature, constitutional, configurational, and conformational assignments had hardly ever been proved rigorously; we therefore had to provide a firm basis by a systematic analysis of the ¹H and ¹³C NMR spectra of thioglycosides, the complexity of the carbohydrate signals necessitating high field studies. The compounds were thus, in the end, correlated with the natural thiogalactoside lincomycin, whose structure including its absolute configuration is known from X-ray investigations. CD curves have been measured at various temperatures in the range of 185–300 nm on a commercial spectropolarimeter equipped with a data processor and connected to a table calculator and plotter, directly furnishing data suitable for, e.g., Kronig-Kramers type transformations or curve analysis and displaying the results. These CD data were correlated with the UV spectra and the ORD curves of the substrates. Typically, the UV curves are devoid of detail except in the case of the acetates, where a shoulder in the region of the n→π? transition is discernible. In the ORD, the Cotton effects (CE) are largely suppressed by the background contribution of the “invisible giant” in the far UV. In the thiogalactopyranosides all accessible Cotton effects are associated with electron transitions within the sulfur or possibly the coupled O-C-S chromophore, whereas a relatively small negative, composite CE is contributed by the acetate carbonyl groups in the acetates.     

Free radical entry in emulsion polymerizations

Measurements of the rate coefficients characterising the entry of free radicals into seed particles in styrene emulsion polymerizations has allowed the rate determining step for entry to be identified. This was found to be the rate of production of oligomeric species in the aqueous phase by monomer addition to the primary free radicals. Once formed the subsequent diffusion of these species to the latex particles (and their incorporation within these particles) is relatively fast, contrary to the assumptions of the previous diffusion controlled theories. The experimental results imply that the entering free radicals contain only two or three monomer units. Thermodynamic considerations show that such species should be both water soluble and surface active. Similar conclusions have been reached for other sparingly water soluble monomers, such as butyl acrylate and butyl methacrylate.     

Determination of work functions near melting points of refractory metals by using a direct-current arc

A direct-current arc in argon at atmospheric pressure was used to determine effective work functions of refractory metals, including tantalum, tungsten, molybdenum, and niobium. The procedure is experimentally advantageous because surface cleanliness of the specimen is not critical, high vacuum is not required, and the anode-cathode spacing is not critical. The experimental procedure involves striking an arc to a metal wire cathode to form a melted ball having an emitting area defined by its diameter. The literature melting point of the metal is taken as the emitting temperature. By using these parameters and the known arc current, effective work functions were calculated from the Richardson-Dushman equation. The calculated work functions agree with recommended handbook values to within about 0.1 V and have typical repeatabilities of 0.02 V. By varying the arc current, Richardson plots can be made over a temperature range from a few hundred degrees below the melting point to about 50° over the melting point of the test metal. A Richardson plot over this temperature range is presented for tantalum.     

Multiobjective routing problems

Summary Many network routing problems, particularly where the transportation of hazardous materials is involved, are multiobjective in nature; that is, it is desired to optimise not only physical path length but other features as well. Several such problems are defined here and a general framework for multiobjective routing problems is proposed. The notion of “efficient solution” is defined and it is demonstrated, by means of an example, that a problem may have very many solutions which are efficient. Next, potentially useful solution methods for multiobjective routing problems are discussed with emphasis being placed on the use of shortest/k-shortest path techniques. Finally, some directions for possible further research are indicated. Invited by B. Pelegrin     

A Multiresolution Method for Numerical Reduction and Homogenization of Nonlinear ODEs

The multiresolution analysis (MRA) strategy for the reduction of a nonlinear differential equation is a procedure for constructing an equation directly for the coarse scale component of the solution. The MRA homogenization process is a method for building a simpler equation whose solution has the same coarse behavior as the solution to a more complex equation. We present two multiresolution reduction methods for nonlinear differential equations: a numerical procedure and an analytic method. We also discuss one possible appproach to the homogenization method.     

Approximation of Solutions of Nonlinear Equations of Monotone and Hammerstein Type

Let X be a real uniformly smooth and uniformly convex Banach space with dual X ^*. Let A: X → X ^* be a bounded uniformly submonotone map. It is proved that a Mann-type approximation sequence converges strongly to Jx ^* where x ^* ∈ N(A). Furthermore, as an application of this result an iterative sequence which converges strongly to a solution of the Hammerstein equation u+KFu = 0 is constructed where, F:X→X^* and K:X^*→X are monotone-type mappings. No invertibility assumption is imposed on K. Moreover, neither K nor F need be compact. Finally, our method is of independent interest.     

Conditions for secondary particle formation in emulsion polymerization systems

A simple means is deduced for determining conditions for secondary particle formation in emulsion polymerization systems in systems where the amount of added surfactant is below the cmc. A new radical formed from initiator in the aqueous phase will undergo some polymerization with aqueous-phase monomer, but must have three possible eventual fates: aqueous-phase termination, entry into a preexisting particle, or creation of a new particle. The means for determining the onset and extent of secondary nucleation is to modify HUFT theory to take into account a successful model for entry [ Macromolecules, 24, 1629 (1991)] which states that entry occurs if and only if the aqueous-phase radical has achieved a critical degree of polymerization z. Particle formation below the cmc is by homogeneous/coagulative nucleation which (if coagulation is ignored) gives an upper bound to the rate of formation of precursor particles; these are of a degree of polymerization J_crit > z. The resulting equations are readily solved, and require only a knowledge of the aqueous-phase propagation and termination rate coefficients (the latter is very high: ca. 10⁹ dm³ mol⁻¹ s⁻¹ for termination between the very small radicals), z and j_crit. Easily applied means are given for estimating all these quantities. The treatment gives good accord with experimentally observed conditions for the onset of secondary nucleation in low-surfactant systems (including taking in situ micellization into account).