Amperometric method for determining the degree of complexation of polyelectrolytes with cationic surfactants

The complexation of sodium polystyrene sulfonate with monovalent cationic surfactants at a microsized liquid/liquid interface has been studied using electrochemistry. The method is based on measurement of surfactant ion transfer across the interface between two immiscible electrolyte solutions (ITIES). The complexation of various cationic surfactants (alkylpyridinium- and trimethylammonium-) with oligosized polystyrene sulfonate was measured. Binding isotherms were used to determine the degree of binding as a function of the surfactant chain length and type of head group. It was found that the hydrophobicity of the surfactant was the predominant factor. The effect of the polyelectrolyte chain length on the binding mechanism was studied using cetylpyridinium chloride as a complexing agent. It was found that binding affinity, as well as cooperativity of the binding process, decreases with decreasing polyelectrolyte chain length. Thermodynamics of surfactant binding was measured using titration microcalorimetry. The thermodynamic data obtained show that the enthalpy of surfactant binding is not dependent on polymer chain length, but an increase in chain length makes the binding process entropically more favorable.     

Selective separations by reactive ion exchange : Part III. Preconcentration and separation of oxo anions

A new procedure for simultaneous preconcentration, separation, and determination of permanganate, chromate and vanadate was developed for aqueous solutions containing p.p.b. levels of these anions (and molybdate). The presence of other (non-complexing) ions in p.p.m. concentrations did not interfere. The procedure consisted of reactive adsorption of all three anions as their reduced cations, on iron(II)-treated resin, followed by elution of vanadium(IV) with 0.01 M HNO₃/H₂O₂, manganese(II) with 0.35 M HCl, and chromium(III) with 4M HCl. Concentration factors of 40 were obtained with 1-l “samples” 10 p.p.b. concentrations were determined with standard deviations of 4–5 % by a.a.s. and conventional spectrophotometry.     

ETUDE EN SPECTROMETRIE DE MASSE DE PHOSPHONATES ENYNIQUES ET DE β-CETOPHOSPHONATES-γ, δ-ETHYLENIQUES

The mass spectrometric study of acetylenic dialkylphosphonates (I) and of γ, δ-éthylenic-β-ketophosphonates (II) is characterised by rearrangement processes of the phosphorylated group and cleavage of the phosphorus-carbon bond. The fragmentation patterns of compounds II were identical to those found for I by loss of water.     

从聚丙烯流动曲线估算分子量分布

聚丙烯的控制降解技术由于能够带来很好的经济效益，国内外都在进行研究．其中分子量分布是一个重要数据，它对于聚丙烯的注塑、纺丝、薄膜等加工过程都有重要的影响．分子量分布一般用重均分子量Mw和数均分子量Mn之比D=Mw/Mn来表征，称为分子量分布指数．它可以     

Analysis of green copper pigments in illuminated manuscripts by micro-Raman spectroscopy

In the majority of the literature describing green coloured materials used on ancient painting layers (15th or 16th century), two copper greens are mainly cited: malachite [CuCOr3 x Cu(OH)2] and verdigris [Cu(CH3COO)2 x [Cu(OH)2]3 x 2H2O]. It is shown, by micro-Raman spectroscopy, that the artists were actually employing more than these two copper greens, in particular various copper sulfates, among which the most common pigment found is posnjakite [CuSO4 x 3Cu(OH)2 x H2O]. In contrast to the PIXE (particle induced X-ray emission) technique, Raman spectroscopy is a technique of choice, able to distinguish not only a copper sulfate from a carbonate or acetate but also the different sulfates themselves; in this respect, we found that the high wavenumber region (2800-4000 cm(-1)), characteristic of H2O vibrations, is of particular interest. It is also shown that numerous green areas were created with mixtures of a copper sulfate mixed with other pigments, for instance to enhance the colour depth. Finally, in some cases, no green pigment is actually employed but the colour is obtained by intimately mixing yellow and blue pigments. All these results led to a new look at the pigments which were in use on the palettes of the ancient artists.     

Synthesis of l,l-puromycin

l,l-Puromycin, a diastereomer of the natural peptidyl nucleoside antibiotic puromycin, has been synthesized from l-xylose in 13 steps.     

Combined phenyl silane and immunoaffinity column cleanup with liquid chromatography for determination of ochratoxin A in roasted coffee: collaborative study

A collaborative study was conducted to evaluate a liquid chromatography (LC) method for ochratoxin A using sequential phenyl silane and immunoaffinity column cleanup. The method was tested at 3 different levels of ochratoxin A in roasted coffee, which spanned the range of possible future European regulatory limits. The test portion was extracted with methanol and sodium bicarbonate by shaking for 30 min. The extract was filtered, centrifuged, and then cleaned up on a phenyl silane column before being eluted from the washed column with methanol-water. The eluate was diluted with phosphate-buffered saline (PBS) and applied to an ochratoxin A immunoaffinity column, which was washed with water. The ochratoxin A was eluted with methanol, the solvent was evaporated, and the residue was redissolved in injection solvent. After injection of this solution onto a reversed-phase LC apparatus, ochratoxin A was measured by fluorescence detection. Eight laboratory samples of low-level naturally contaminated roasted coffee and 2 laboratory samples of blank coffee (< 0.2 ng/g ochratoxin A at the signal-to-noise ratio of 3:1), along with ampules of ochratoxin A calibrant and spiking solutions, were sent to 15 laboratories in 13 different European countries. Test portions of the laboratory samples were spiked at levels of 4 ng/g ochratoxin A, and recoveries ranged from 65 to 97%. Based on results for spiked blank material (blind duplicates) and naturally contaminated material (blind duplicates at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 2 to 22% and the relative standard deviation for reproducibility (RSDR) ranged from 14 to 26%. The method showed acceptable within- and between-laboratory precision, as evidenced by HORRAT values, at the low level of determination for ochratoxin A in roasted coffee.     

Facial selectivity of the Ireland-Claisen rearrangement of allylic esters of 2-methyl and 2-methoxycyclopentanecarboxylic acids

Ketene silylacetals derived from prenyl and (Z)- and (E)-crotyl 2-methylcyclopentanecarboxylates (9) were subjected to the Ireland-Claisen rearrangement. All three substrates rearranged with complete facial selectivity, but the (Z)- and (E)-crotyl systems gave a mixture comprised of the same diastereomers of 1-(1-methyl-2-propenyl)-2-methylcyclopentanecarboxylic acid (14) in ratios of 2:1 and 1:2, respectively. In contrast, the ketene silylacetals prepared from allyl and prenyl 2-methoxycyclopentanecarboxylates (22) underwent rearrangements with both facial stereochemistries.     

A Cutting Planes Algorithm for the <Emphasis Type="Italic">m</Emphasis>-Salesmen Problem

The existence of reliable and flexible FORTRAN programs for integer linear programming has recently enabled the development of very efficient algorithms for the travelling salesman problem. The main characteristic of these algorithms is the relaxation of most of the constraints of the problem during its solution. The same approach can be used for the solution of the m-salesmen problem in which m salesmen starting from the same city must visit only once n cities at minimum cost. The number of salesmen can be fixed in advance or allowed to vary, upper and lower bounds set on the number of salesmen and even fixed costs associated with the salesmen. The results obtained so far are very encouraging. Problems of up to 100 cities have been solved optimally for the m-travelling salesmen case and other more complex problems are currently under study.     

Highly substituted azulene dyes as multifunctional NLO and electron-transfer compounds

Two highly substituted azulene derivatives were synthesised by Pd-mediated dimerisation from the corresponding tolan species. One azulene derivative (2) has donor functionalities (dianisylaminophenyl and dianisylamino) in the 1-, 2-, 3- and 6-positions, while the other (1) has donors (dianisylaminophenyl) in the 2- and 6-positions and acceptors (nitrophenyl) in the 1- and 3-positions. Each azulene derivative shows strong bond length alternation in the solid state, determined by X-ray crystal analysis, and an intense CT band around 450-500 nm in its UV/Vis spectrum. The first-order hyperpolarisability of 1 and of 2 was measured by hyper-Rayleigh scattering and is about that of disperse red DR1. Both azulene derivatives show multiple oxidation processes. The intramolecular adiabatic ET behaviour of the mixed valence radical cations of 1 and of 2 was investigated by UV/Vis/NIR spectroelectrochemistry. The intervalence-CT band of 1(+) could be analysed by the Generalised Mulliken-Hush theory, which yields an electronic coupling V=1140 cm(-1) for the optically induced adiabatic hole transfer.