Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.     

The electrophilic reactions of pentacyanonitrosylferrate(II) with hydrazine and substituted derivatives. Catalytic reduction of nitrite and theoretical prediction of eta(1)-, eta(2)-N(2)O bound intermediates

The electrophilic reactivity of the pentacyanonitrosylferrate(II) ion, [Fe(CN)(5)NO](2)(-), toward hydrazine (Hz) and substituted hydrazines (MeHz, 1,1-Me(2)Hz, and 1,2-Me(2)Hz) has been studied by means of stoichiometric and kinetic experiments (pH 6-10). The reaction of Hz led to N(2)O and NH(3), with similar paths for MeHz and 1,1-Me(2)Hz, which form the corresponding amines. A parallel path has been found for MeHz, leading to N(2)O, N(2), and MeOH. The reaction of 1,2-Me(2)Hz follows a different route, characterized by azomethane formation (MeNNMe), full reduction of nitrosyl to NH(3), and intermediate detection of [Fe(CN)(5)NO](3)(-). In the above reactions, [Fe(CN)(5)H(2)O](3)(-) was always a product, allowing the system to proceed catalytically for nitrite reduction, an issue relevant in relation to the behavior of the nitrite and nitric oxide reductase enzymes. The mechanism comprises initial reversible adduct formation through the binding of the nucleophile to the N-atom of nitrosyl. The adducts decompose through OH(-) attack giving the final products, without intermediate detection. Rate constants for the adduct-formation steps (k = 0.43 M(-)(1) s(-)(1), 25 degrees C for Hz) decrease with methylation by about an order of magnitude. Among the different systems studied, one-, two-, and multielectron reductions of bound NO(+) are analyzed comparatively, with consideration of the role of NO, HNO (nitroxyl), and hydroxylamine as bound intermediates. A DFT study (B3LYP) of the reaction profile allows one to characterize intermediates in the potential hypersurface. These are the initial adducts, as well as their decomposition products, the eta(1)- and eta(2)-linkage isomers of N(2)O.     

The influence of cosolvent polarity on the flow properties of hydroalcoholic gels: empirical models

The aim of this study was to investigate the influence of cosolvent polarity on the rheological flow properties of aqueous and hydroalcoholic gels obtained from the Carbopol Ultrez 10 base and used for topical applications. Specifically, we have examined the effect of pH (range 4.0--7.0) on the consistency and flow properties of dispersed systems in water and mixtures--15 : 85% v/v of methanol : water, ethanol : water, n-propanol : water and n-butanol : water--at a constant polymer concentration of 0.3% w/w. The gels, which had decreasing polarity values in the jellifying medium, showed qualitatively similar flow behavior, characteristic of pseudoplastic systems, and all of the flow curves were adjusted to the Ostwald model. Sigmoidal dose response functions were calculated to describe the flow and consistency indexes as a function of pH. As a result, the influence of alcohol polarity on the polymer network has been assessed meaningfully using the empirical parameters obtained: maximum consistency index value (k(max)), pH value required for 50% development of polymer network (pH(50)), and asymptotic flow index value (n(min)) for the fully structured gels.     

Alpha-sulfinyl carbanions as a new source of olefins

[reaction: see text] Secondary alpha-lithiosulfinyl carbanions react either intermolecularly, after transmetalation into an organocopper derivative in an S(N)2-type process with zinc carbenoid, or intramolecularly via higher-order zincate to give, through a tandem zinc homologation-beta-elimination reaction the corresponding alkenes. alpha,alpha-Disubstituted alkenes are only formed from tertiary alpha-lithiosulfinyl carbanions via the 1,2-metalate rearrangement.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Conformational behaviour of 2,2′-bipyrrole

The rotational potential around the interannular bond in 2,2-bipyrrole has been calculated making use of standard minimal STO-3G and split valence 4-31G basis sets. Geometrical optimization concerning the most significant interannular internal parameters has been performed with both basis sets. The trans conformer is predicted to be more stable than the cis. The minimal basis set predicts the existence of a cisoid-gauche minimum which after limited optimization becomes very shallow and it seems to be an artifact of the rigid rotor approximation. At 4-31G level, both the trans and cis conformers represent maxima in the potential curve and two gauche minima appear at =46.0° and =147.6°, the latter being the absolute minimum. The absolute maximum of the potential curve corresponds to the cis conformer.     

Approximate transferability in alkanenitriles

The atomic and bond properties of a series of alkanenitriles were calculated in order to analyze the transferability of the CN, methyl, and methylene groups. The calculations were carried out using the atoms in molecules (AIM) theory on RHF/6‐31++G**// RHF/6‐31G** wave functions obtained for compounds CN–R (R ranging from H to C₁₁H₂₃). Linear correlations between L(Ω) and N(Ω) were used to establish N(CH₂) and N(CH₃) nearly transferable values. Average values and maximum differences to the mean value of several properties were used for classifying the CN group. It shows a transferable behavior along the CN–R series for R>Et. The methyl group presents specific properties when R<Pr. The methylene groups can be classified considering both their position with respect to the end of the chain and the position with respect to the CN group. The atomic energy displays a dependence on the molecular size. Although this behavior does not allow to consider this property as transferable, both the ab initio total electronic molecular energies and the experimental heats of formation can be fitted, by linear regression analysis, as a function of the number of methylene groups. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Orbital-band interactions and the reactivity of molecules on oxide surfaces: from explanations to predictions

 The surface chemistry of oxides is relevant for many technological applications: catalysis, photoelectrolysis, electronic-device fabrication, prevention of corrosion, sensor development, etc. This article reviews recent theoretical works that deal with the surface chemistry of oxides. The account begins with a discussion of results for the adsorption of CO and NO on oxides, systems which have been extensively studied in the literature and constitute an ideal benchmark for testing the quality of different levels of theory. Then, systematic studies concerned with the behavior of adsorbied alkali metals and sulfur-containing molecules are presented. Finally, a correlation between the electronic and chemical properties of mixed-metal oxides is analyzed and basic principles for designing chemically active oxides are introduced. Advances in theoretical methods and computer capabilities have made possible a fundamental understanding of many phenomena associated with the chemistry of molecules on oxide surfaces. Still many problems in this area remain as a challenge, and the approximate nature of most theoretical methods makes necessary a close coupling between theory and experiment. Following this multidisciplinary approach, the importance of band-orbital interactions for the reactivity of oxide surfaces has become clear. Simple models based on band-orbital mixing can explain trends found for the interaction of many adsorbates with oxide surfaces. These simple models provide a conceptual framework for modifying or controlling the chemical activity of pure oxides and for engineering mixed-metal oxides. In this respect, theoretical calculations can be very useful for predicting the best ways for enhancing the reactivity of oxide systems and reducing the waste of time, energy and materials characteristic of an empirical design. Received: 21 June 2001 / Accepted: 8 October 2001 / Published online: 1 February 2002     

IR study of heterogeneity of OH groups in zeolite HY-splitting of OH and OD bands

We have been studying the problem of heterogeneity of OH groups in zeolites HY for a long time. The heterogeneity was suggested by the shift of the IR band of OH groups restoring upon ammonia desorption and also by the fact that the band of OH groups forming hydrogen bonds was relatively broad (broader than for homogeneous acidic OH). In the present study we present another important argument for heterogeneity: the splitting of the IR band of free OH and OD groups in a zeolite of Si/Al=8.3 dealuminated by (NH₄)₂SiF₆ treatment. Such a splitting is the best seen in low temperature spectra of OD groups. We found less acidic 3640 cm⁻¹ (AlO)(SiO)₂SiO₁HAl(OSi)₃ and more acidic 3625 cm⁻¹ (SiO)₃SiO₁HAl(OSi)₃ groups. The presence of these two kinds of hydroxyls corresponds to the presence of Si(2Al) and Si(1Al), respectively, detected in ²⁹Si MAS NMR spectra. We also found a small amount of strongly acidic 3599 cm⁻¹ hydroxyls interacting with extraframework Al species.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.