Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Complexation of Ni (II) and Zn(II) ions by 3-(1-naphthyI)-2-mercaptopropenoic acid

The complexation equilibria between Ni(II) and Zn(II) metal ions with 3-(1-naphthyl)-2-mercaptopropenoic acid (H₂NMP) were studied by glass electrode potentiometry, at 25 °C and 1.0 mol·dm^–3 in NaClO₄ as constant ionic medium in 50% (v/v) water-ethanol solutions. Formation constants for the complexes Ni(NMP), Ni(NMP) ₂ ^2– , Zn(NMP) and Zn(NMP) ₂ ^2– , refined by the MINIGLASS program, are reported.     

DNase activity ofMicrococcal endonuclease insolubilized on corn cob

The endonuclease from S. aureus has been immobilized on ground maize cob, previously activated with tosyl chloride. Pretreatment of the support on acid before tosylation yielded the best insoluble enzyme derivatives. The catalytic activity has been evaluated as percent of total hydrolysis attained in a batch reactor using DNA as a model substrate. The derivatives prepared are very resistant to high temperatures under conditions of catalysis (24 h at 45 degrees C). For these long reaction times, the extent of hydrolysis in the presence of small amounts of organic solvent (dimethyl sulfoxide at 2 percent) is larger than in plain buffer (Tris). This type of derivative could be very useful for the removal of nucleic acids from single-cell protein concentrates.     

The crystal structure of eudesma-4(15),7(11)-dien-8α, 12-olide: a sesquiterpene lactone fromTrattinickia rhoifolia Willd

The title compound, formula C₁₅H₂₀O₂, is orthorhombic, P2₁2₁2₁ witha=8.747(2),b=12.025(3),c=12.554(3)Å,Z=4, andD _m =1.32(2)g/ml. The structural analysis shows that the compound corresponds to eudesma-4(15),7(11)-dien-8,12-olide, a sesquiterpene lactone previously isolated fromAster umbellatus but whose crystal structure was unknown.     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.