Influence of ion pairing on the oxidation of iodide by MLCT excited states

The oxidation of iodide to diiodide, I(2)˙(-), by the metal-to-ligand charge-transfer (MLCT) excited state of [Ru(deeb)(3)](2+), where deeb is 4,4'-(CO(2)CH(2)CH(3))(2)-2,2'-bipyridine, was quantified in acetonitrile and dichloromethane solution at room temperature. The redox and excited state properties of [Ru(deeb)(3)](2+) were similar in the two solvents; however, the mechanisms for excited state quenching by iodide were found to differ significantly. In acetonitrile, reaction of [Ru(deeb)(3)](2+*) and iodide was dynamic (lifetime quenching) with kinetics that followed the Stern-Volmer model (K(D) = 1.0 ± 0.01 × 10(5) M(-1), k(q) = 4.8 × 10(10) M(-1) s(-1)). Excited state reactivity was observed to be the result of reductive quenching that yielded the reduced ruthenium compound, [Ru(deeb(-))(deeb)(2)](+), and the iodine atom, I˙. In dichloromethane, excited state quenching was primarily static (photoluminescence amplitude quenching) and [Ru(deeb(-))(deeb)(2)](+) formed within 10 ns, consistent with the formation of ion pairs in the ground state that react rapidly upon visible light absorption. In both solvents the appearance of I(2)˙(-) could be time resolved. In acetonitrile, the rate constant for I(2)˙(-) growth, 2.2 ± 0.2 × 10(10) M(-1) s(-1), was found to be about a factor of two slower than the formation of [Ru(deeb(-))(deeb)(2)](+), indicating it was a secondary photoproduct. The delayed appearance of I(2)˙(-) was attributed to the reaction of iodine atoms with iodide. In dichloromethane, the growth of I(2)˙(-), 1.3 ± 0.4 × 10(10) M(-1) s(-1), was similar to that in acetonitrile, yet resulted from iodine atoms formed within the laser pulse. These results are discussed within the context of solar energy conversion by dye-sensitized solar cells and storage via chemical bond formation.     

A practical synthesis of Rho-Kinase inhibitor Y-27632 and fluoro derivatives and their evaluation in human pluripotent stem cells

A practical synthesis of the Rho-Kinase inhibitor Y-27632 and two new fluoro derivatives was achieved in seven steps and with a good overall yield of 45% starting from commercially available (R)-1-phenylethylamine. Compared to Y-27632 the new fluoro derivatives showed reduced or no effect on hPSC vitality and expansion after dissociation in human pluripotent stem cells.     

The frustrated Lewis pair induced formation of a pentafulvene [6 + 4] cycloaddition product

The frustrated Lewis pair Mes(2)P-CH(2)CH(2)-B(C(6)F(5))(2) reacts with excess 6,6-dimethylpentafulvene to yield a P/B-Lewis pair addition product to an elusive pentafulvene [6 + 4] cycloaddition dimer. This observation may open a new field of utilization of frustrated Lewis pair chemistry.     

Mixed DPPC/DPTAP monolayers at the air/water interface: influence of indolilo-3-acetic acid and selenate ions on the monolayer morphology

The interactions of mixed monolayers of two lipids, zwitterionic 1,2-dipalmitoyl-phosphatidylcholine (DPPC) and positively charged 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP), with phytohormone indolilo-3-acetic acid (IAA) and selenate anions in the aqueous subphase were studied. For this purpose, isotherms of the surface pressure versus the mean molecular area were recorded. Domain formation was investigated by using Brewster angle microscopy (BAM). The method of grazing incidence X-ray diffraction (GIXD) was also applied for the characterization of the organization of lipid molecules in condensed monolayers. It was found that selenate ions contribute to monolayer condensation by neutralizing the positive net charge of mixed monolayers whereas IAA molecules penetrated the lipid monolayer, causing its expansion/fluidization. When both solutes were introduced into the subphase, a competition between them for interaction with the positively charged lipids in the monolayer was observed.     

Improving Lanthanide Nanocrystal Colloidal Stability in Competitive Aqueous Buffer Solutions using Multivalent PEG-Phosphonate Ligands

The range of properties available in the lanthanide series has inspired research into the use of lanthanide nanoparticles for numerous applications. We aim to use NaLnF(4) nanoparticles for isotopic tags in mass cytometry. This application requires nanoparticles of narrow size distribution, diameters preferably less than 15 nm, and robust surface chemistry to avoid nonspecific interactions and to facilitate bioconjugation. Nanoparticles (NaHoF(4), NaEuF(4), NaGdF(4), and NaTbF(4)) were synthesized with diameters from 9 to 11 nm with oleic acid surface stabilization. The surface ligands were replaced by a series of mono-, di-, and tetraphosphonate PEG ligands, whose synthesis is reported here. The colloidal stability of the resulting particles was monitored over a range of pH values and in phosphate containing solutions. All of the PEG-phosphonate ligands were found to produce non-aggregated colloidally stable suspensions of the nanoparticles in water as judged by DLS and TEM measurements. However, in more aggressive solutions, at high pH and in phosphate buffers, the mono- and diphosphonate PEG ligands did not stabilize the particles and aggregation as well as flocculation was observed. However, the tetraphosphonate ligand was able to stabilize the particles at high pH and in phosphate buffers for extended periods of time.     

Determination of insoluble, soluble, and total dietary fiber (CODEX definition) by enzymatic-gravimetric method and liquid chromatography: collaborative study

A method for the determination of insoluble (IDF), soluble (SDF), and total dietary fiber (TDF), as defined by the CODEX Alimentarius, was validated in foods. Based upon the principles of AOAC Official Methods 985.29, 991.43, 2001.03, and 2002.02, the method quantitates water-insoluble and water-soluble dietary fiber. This method extends the capabilities of the previously adopted AOAC Official Method 2009.01, Total Dietary Fiber in Foods, Enzymatic-Gravimetric-Liquid Chromatographic Method, applicable to plant material, foods, and food ingredients consistent with CODEX Definition 2009, including naturally occurring, isolated, modified, and synthetic polymers meeting that definition. The method was evaluated through an AOAC/AACC collaborative study. Twenty-two laboratories participated, with 19 laboratories returning valid assay data for 16 test portions (eight blind duplicates) consisting of samples with a range of traditional dietary fiber, resistant starch, and nondigestible oligosaccharides. The dietary fiber content of the eight test pairs ranged from 10.45 to 29.90%. Digestion of samples under the conditions of AOAC 2002.02 followed by the isolation, fractionation, and gravimetric procedures of AOAC 985.29 (and its extensions 991.42 and 993.19) and 991.43 results in quantitation of IDF and soluble dietary fiber that precipitates (SDFP). The filtrate from the quantitation of water-alcohol-insoluble dietary fiber is concentrated, deionized, concentrated again, and analyzed by LC to determine the SDF that remains soluble (SDFS), i.e., all dietary fiber polymers of degree of polymerization = 3 and higher, consisting primarily, but not exclusively, of oligosaccharides. SDF is calculated as the sum of SDFP and SDFS. TDF is calculated as the sum of IDF and SDF. The within-laboratory variability, repeatability SD (Sr), for IDF ranged from 0.13 to 0.71, and the between-laboratory variability, reproducibility SD (SR), for IDF ranged from 0.42 to 2.24. The within-laboratory variability Sr for SDF ranged from 0.28 to 1.03, and the between-laboratory variability SR for SDF ranged from 0.85 to 1.66. The within-laboratory variability Sr for TDF ranged from 0.47 to 1.41, and the between-laboratory variability SR for TDF ranged from 0.95 to 3.14. This is comparable to other official and approved dietary fiber methods, and the method is recommended for adoption as Official First Action.     

Hydrogen activation by an intramolecular boron lewis acid/zirconocene pair

Let's split: Reaction of the zirconium complex A with Piers' borane [HB(C(6) F(5) )(2) ] yields the unusual borylalkyne zirconocene complex B which reacts with dihydrogen, activating it to give the doubly hydrido bridged alkyne zirconium complex C.     

Symbiotic cooperation in the biosynthesis of a phytotoxin

Division of labor: A combination of genetic, microbial, and chemical analyses solved the riddle of the dual epoxidation in the biosynthesis of rhizoxin, the causative agent of rice seedling blight. Bacterial endosymbionts of Rhizopus microsporus mediate the first epoxidation by a dedicated cytochrome P450 monooxygenase. The second oxirane ring is introduced by the fungal host and results in a substantially increased potency of the phytotoxin.     

Carboboration Reactions of 1,2‐Bis[(diarylphosphino)ethynyl]benzenes with Tris(pentafluorophenyl)borane

The 1,2‐bis[(diarylphosphino)ethynyl]benzene derivatives 1a (R=Ph) and 1b (R=o‐tolyl) undergo 1,1‐carboboration at one of their acetylene units upon treatment with (C₆F₅)₃B at elevated temperature to give the products 5a and 5b , respectively. At room temperature, we observed the formation of the corresponding phosphireniumborate zwitterions, 7a and 7b , respectively, which may be intermediates of the 1,1‐carboboration reactions. The reaction of the more bulky 1,2‐bis[(dimesitylphosphino)ethynyl]benzene 1c with (C₆F₅)₃B takes a different course. At 110°, we observed the complete conversion to the benzopentafulvene derivative 8 which is probably formed in a typical carbocation rearrangement sequence after the initial (C₆F₅)₃B Lewis acid‐addition step. The compounds 5a, 5b, 7b , and 8 were characterized by X‐ray crystal‐structure analyses.