The 1,2,4-triazolyl cation: thermolytic and photolytic studies

The generation of the 1,2,4-triazolyl cation (1) has been attempted by the thermolysis and photolysis of 1-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridinium tetrafluoroborate (2) and the thermolysis of 1- and 4-diazonium-1,2,4-triazoles, using mainly mesitylene as the trapping agent. Thermolysis of 2 gave mostly 1,2,4-triazole, together with 3-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridine, 4-(1,2,4-triazol-4-ylmethyl)-2,6-dimethylpyridine, and 4-(2,4,6-trimethylbenzyl)-2,6-dimethylpyridine. Thermolysis of each of the diazonium salts in the presence of mesitylene again gave mainly triazole together with very low yields of 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene and the corresponding -4-yl isomer in about the same ratio. On the other hand, photolysis of 2 in mesitylene gave mainly 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene. A photoinduced electron transfer from mesitylene to 2 has been observed and preliminary laser flash photolyses of 2 and the corresponding 2,4,6-triphenylpyridinium salt have been carried out. The observed transients are explained as arising from the first excited states of the pyridinium salts rather than from 1. Ab initio MO calculations are reported and indicate that the predicted electronic ground-state of the triazolyl cation is a triplet state of B1 symmetry with five pi electrons, which corresponds to a diradical cation (1c). Possible mechanisms for the formation of the various products are proposed.     

Identification of diethylene glycol monobutyl ether as a source of contamination in an ion trap mass spectrometer

Tandem liquid chromatography-mass spectrometry coupled to online radioactive material detection (LC/RAM/MS/MS) is a technique that is used routinely for in vivo and in vitro drug metabolism studies and allows for a simultaneous correlation between radiochemical peaks and mass spectral data. The compound diethylene glycol monobutyl ether (DGBE), a component of a commercially available scintillation cocktail for RAM analysis, was identified as a source of overwhelming chemical noise in a mass spectrometer which was used in an LC/RAM/MS/MS configuration. In this report, we describe the identification of DGBE as the source of the chemical noise and the methods that were used to minimize the exposure of the mass spectrometer to volatile components of the scintillation cocktail.     

Monomer, dimer, tetramer, polymer: structural diversity in zinc and cadmium complexes of chelate-tethered nucleobases

A series of ZnII and CdII complexes of adenine and guanine derivatives containing a diamine tether have been isolated from aqueous solutions and characterised by single crystal X-ray analysis. These studies reveal a wide range of structural types including monomeric, dimeric, tetrameric and polymeric architectures. The extended structures arise from the ability of the ligands to bridge metal ions using the chelating tether in conjunction with N7 of the nucleobase. Additional metal-nucleobase co-ordination is generally observed at the N3-site of the adenine derivatives. With CdII, ethylenediamine-N9-ethylguanine forms an inverted G-tetrad type structure.     

Bifurcated, modular syntheses of chiral annulet triazacyclononanes

Three chiral 2,6-disubstituted tri-N-methyl azamacrocycles have been prepared by modular methods. These macrocycles were accessed from three chiral 1,4,7-triazaheptanes intermediates that were prepared by two independent routes. The first of these routes involved the benzylamine opening of chiral tosyl aziridines followed by debenzylation but was problematic on solubility grounds. A second, more effective, route was developed which avoided debenzylation by using ammonia in the nucleophilic opening of chiral tosyl aziridines.     

Extraction-spectrophotometric determination of sulphide and sulphite in waters based on formation of the bis(2,9-dimethyl-1,10-phenanthroline) copper(I) ion

A spectrophotometric method is described for the determination of sulphide or sulphite. The bis(2,9-dimethyl-1,10-phenanthroline)copper(II) ion is reduced at pH 10 by sulphide in the presence of formaldehyde and by sulphide and sulphite in its absence. The resulting copper(I) complex is extracted into chloroform and measured. With any convenient sample volume between 1 and 100 ml, the limits of detection are 0.1 mg for sulphide and 0.25 μg for sulphite. The method is unaffected by iron(II) and nitrite, in concentrations of 100 and 1000 mg l^-1, respectively.     

Bis(m-phenylene)-32-crown-10-based cryptands, powerful hosts for paraquat derivatives

Four new bis(m-phenylene)-32-crown-10-based cryptands with different third bridges were prepared. Their complexes with paraquat derivatives were studied by proton NMR spectroscopy, mass spectrometry, and X-ray analysis. It was found that these cryptands bind paraquat derivatives very strongly. Specifically, a diester cryptand with a pyridyl nitrogen atom located at a site occupied by either water or a PF(6) anion in analogous complexes exhibited the highest association constant K(a) = 5.0 x 10(6) M(-1) in acetone with paraquat, 9000 times greater than the crown ether system. X-ray structures of this and analogous complexes demonstrate that improved complexation with this host is a consequence of preorganization, adequate ring size for occupation by the guest, and the proper location of the pyridyl N-atom for binding to the beta-pyridinium hydrogens of the paraquat guests. This readily accessible cryptand is one of the most powerful hosts reported for paraquats.     

Hydride donor abilities and bond dissociation free energies of transition metal formyl complexes

The hydride complex [Pt(dmpe)2H]+ (dmpe = 1,2-bis(dimethylphosphino)ethane) reversibly transfers H- to the rhenium carbonyl complex [CpRe(PMe3)(NO)(CO)]+, giving the formyl CpRe(PMe3)(NO)(CHO). From the equilibrium constant for the hydride transfer (16.2), the DeltaGdegrees for the reaction was determined (-1.6 kcal/mol), as was the hydride-donating ability of the formyl (44.1 kcal/mol). The hydride-donating ability, DeltaGdegrees(H-), is defined as the energy required to release the hydride ion into solution by the formyl complex [i.e. M(CHO) right arrow M(CO)+ + H-]. Subsequently, the hydride-donating ability of a series of formyl complexes was determined, ranging from 44 to 55 kcal/mol. With use of this information, two rhenium carbonyl complexes, [CpRe(NO)(CO)2]+ and [Cp*Re(NO)(CO)2]+, were hydrogenated to formyls, employing [Pt(dmpp)2]2+ and Proton-Sponge. Finally, the E(1/2)(I/0) values for five rhenium carbonyl complexes were measured by cyclic voltammetry. Combined with the known DeltaGdegrees(H-) values for the complexes, the hydrogen atom donating abilities could be determined. These values were all found to be approximately 50 kcal/mol.     

Intermolecular interactions in (arene)chromium carbonyl compounds: prediction of chiral crystal packing from racemate structure

Six X-ray crystal structures are reported, all containing substituted triphenylmethanol derivative 4 either alone or as its mono or bis(chromium tricarbonyl) complexes. All four chromium complexes studied crystallize with two independent molecules in the crystallographic asymmetric unit. It is demonstrated that from the X-ray crystal structure of the acentric racemic (+/-)-(1pR,1' 'R)(1pS,1' 'S)-[Cr(CO)(3)(eta(6)-t-BuC(6)H(3)(CMeOMe)CPh(2)OH)], (+/-)-3, it is possible to deduce the 4-fold helical structure of the chiral (-)-(1pR,1' 'R) isomer, (-)-3. The bimetallic derivatives demonstrate the ability to control intermolecular interactions by the positioning of relative stereochemistry.     

Investigation of electronic structure and associated nuclear quadrupole interaction of adsorbed fluorine atoms on silicon surface

The electronic energy levels and wave functions of fluorine and chlorine atoms adsorbed at the <111> surface of silicon are obtained by the Hartree-Fock procedure applied to clusters simulating the surface structure. Minimising the total energy with respect to the positions of the halogen atoms, the Si-Cl distance in the adsorbed system was found to be in good agreement with that from a recent SEXAFS measurement, there being no corresponding data presently available for fluorine on silicon surface. The calculated¹⁹ f ^* nuclear quadrupole coupling constants using the electronic wave functions for SiH₃F and the larger cluster Si₄H₉F, simulating the surface, differed substantially in contrast to the situation for the Si-F distance, indicating that the quadrupole coupling is a more sensitive indicator of the adequacy of the cluster chosen to represent the surface system. Experimental results for the coupling constants are awaited for comparison with theory.     

Recent advances in the synthesis of well-defined glycopolymers

Glycopolymers are receiving increasing interest due to their application in areas, such as glycomics, medicine, biotechnology, sensors, and separation science. Consequently, new methods for their synthesis are constantly being developed, with an increasing emphasis on the preparation of well-defined polymers and on the production of complex macromolecular architectures such as stars. This review covers recent developments in the synthesis of glycopolymers, with a particular emphasis on (i) the use of controlled radical polymerization to prepare well-defined glycopolymers from unprotected monomers and (ii) postpolymerization modification strategies using reactive polymer precursors (including “click” reactions). Recent work on the production of glycosylated polypeptides, which are under investigation as mimics of naturally occurring glycoproteins, is also included. The authors offer some suggestions as to future developments and remaining challenges in this topical area of polymer chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci PartA: Polym Chem45: 2059–2072, 2007