Application of a finite-element model to low-frequency sound insulation in dwellings

The sound transmission between adjacent rooms has been modeled using a finite-element method. Predicted sound-level difference gave good agreement with experimental data using a full-scale and a quarter-scale model. Results show that the sound insulation characteristics of a party wall at low frequencies strongly depend on the modal characteristics of the sound field of both rooms and of the partition. The effect of three edge conditions of the separating wall on the sound-level difference at low frequencies was examined: simply supported, clamped, and a combination of clamped and simply supported. It is demonstrated that a clamped partition provides greater sound-level difference at low frequencies than a simply supported. It also is confirmed that the sound-pressure level difference is lower in equal room than in unequal room configurations.     

Spin dynamics and orbital state in LaTiO3

A neutron scattering study of the Mott-Hubbard insulator LaTiO3 ( T(N) = 132 K) reveals a spin wave spectrum that is well described by a nearest-neighbor superexchange constant J = 15.5 meV and a small Dzyaloshinskii-Moriya interaction ( D = 1.1 meV). The nearly isotropic spin wave spectrum is surprising in view of the absence of a static Jahn-Teller distortion that could quench the orbital angular momentum, and it may indicate strong orbital fluctuations. A resonant x-ray scattering study has uncovered no evidence of orbital order in LaTiO3.     

Quantum correlations in the nonperturbative regime of semiconductor microcavities

The nonlinear optical response of semiconductor microcavities in the nonpertubative regime is studied in resonant single-beam-transmission and pump-probe experiments. In both cases a pronounced third transmission peak lying spectrally between the two normal modes is observed. A fully quantized theory is essential for the agreement with the experimental observations, demonstrating that quantum fluctuations leading to intraband polarizations are responsible for this effect.     

X-Ray anomalous scattering study of a charge-ordered state in NaV2O5

Charge ordering of V4+ and V5+ in NaV2O5 has been studied by an x-ray diffraction technique using anomalous scattering near a vanadium K-absorption edge to critically enhance a contrast between the two ions. A dramatic energy dependence of the superlattice intensities is observed below T(C) = 35 K. The charge ordering pattern is the fully charged zigzag-type ladder with the unit cell 2ax2bx4c, but not the chain-type originally proposed for the spin-Peierls state. Charge disproportionation suggested in our model as the average valence V(4.5+/-delta(c)/2) is observed below T(C), showing continuous variation of delta(c) as a function of temperature.     

Stereospecific synthesis and biological evaluation of farnesyl diphosphate isomers

[formula: see text] A unified, stereospecific synthetic route to the three geometric isomers of (E,E)-farnesyl diphosphate (E,E-FPP) (1, 2, and 3) has been developed. The key feature of this synthesis is the ability to control the stereochemistry of triflation of the beta-ketoester 10 to give either 11 or 14. Preliminary evaluation of these compounds with protein-farnesyl transferase indicates that 1 and 2 are surprisingly effective substrates; however, Z,Z-FPP (3) is a poor substrate and a sub-micromolar inhibitor.     

The measurement of sound transmission at structural junctions by an impulse method

With short duration impulsive signals used to provide the excitation the vibration level difference across a T-junction of Perspex plates has been measured both as a function of frequency and angle of incidence. Problems associated with high velocity waves and relatively short path differences have been reduced or eliminated by suitable choice of material and geometry, and by use of spatial as well as temporal averaging. Problems associated with the dispersive nature of bending waves have been reduced by use of low pass filtering. Results are presented for point source excitation and comparison is made with plane wave excitation theory. In addition, plane wave excitation has been simulated by means of line averages of the plate response to a point source and these results are also presented and compared with the theoretical ones.     

Transdermal water mobility in the presence of electrical fields using MR microscopy.

Magnetic resonance microscopy of skin from hairless rats under the influence of electrical fields was conducted for two cases: 1) low voltage constant electrical fields and 2) high-voltage short pulse, electrical fields. Under conditions of the low voltage and low current iontophoresis, i.e., 0 to 20 V, and 0 to 0.5 mA/cm2, it was found that the skin structure, as observed by magnetic resonance microscopy, did not significantly change until 20 Volts were applied across the 0.1 cm thick skin. Under these conditions, the viable epidermis appeared to swell, and this result corresponded to observations from scanning electron microscopy and other research from the literature. High voltage electrical fields, i.e., 220 V 1 ms pulses repeated once per second, appeared to hydrate the stratum corneum as is consistent with published literature on electroporation. In the case of iontophoresis, water self-diffusion coefficients in the epidermis and hair follicle regions at all voltages were affected by the electrical field. Statistical analysis at the 95% confidence level for the comparison of the average differences between diffusion coefficients with the electrical field on and with the electrical field off for pair matched pixels for the viable epidermis show that for 5 V (p = 0.00377), 10 V (p = 0.0108), 20 V (p = 0.0219) regimes there are statistically significant (p < or = 0.05) changes due to the applied electric field. The same analysis for the hair follicle region at 5 V (p = 6.89 x 10(-7)), 10 V (p = 1.42 x 10(-5)), 20 V (p = 3.23 x 10(-3)) also show statistically significant changes (p < or = 0.05). When the electroporation pulse was applied, the water diffusion coefficients increased by about 30% to 6.6 x 10(-6) cm2/s +/- 2.4 x 10(-7) cm2/s and 8.3 x 10(-6) cm2/s +/- 3.7 x 10(-7) cm2/s, for the epidermis and hair follicle regions, respectively. Significant differences were noted between diffusion coefficients in the viable epidermis and the hair follicles for all cases.     

Erbium-induced interdiffusion of gallium and aluminum in GaAs/AlGaAs quantum-well structures

Incorporation of erbium into GaAs/AlGaAs quantum-well structures in the course of their MBE growth has been shown experimentally to initiate effective Ga and Al interdiffusion and Er diffusion due to the erbium-induced enhanced vacancy formation. A mechanism for the formation of cation vacancies is proposed, which is based on the generation of local strains by the incorporating erbium. It is shown that erbium interacts with aluminum to produce in AlGaAs aluminum-enriched, erbium-containing clusters. Fiz. Tverd. Tela (St. Petersburg) 41, 540–544 (March 1999)     

Terrigenous Clay Deposition on Estuarine Sandflats: Using Stable Isotopes to Determine the Role of the Mud Crab,Helice Crassa Dana,in the Recovery Process

Abstract

Clay slurries, mixed in seawater, were deposited on intertidal mudflats in two contrasting estuaries in an experiment designed to evaluate the potential impact of soil erosion from adjacent urban developments on the biodiversity of the benthic communities, and the subsequent recovery mechanisms. Profiles of the natural abundance of stable isotopes from sediment cores where examined to determine immediate and longer-term impacts of the clay on the ambient sediments. The source clays with δ¹³C values of about ?26‰ were easily distinguished from natural sediments with δ¹³C values of ?19.7 ± 1.1‰ at site OK and ?14.2 ± O.9‰ at site WP, and bioturbation was seen to generate a gradient between these values. Physical processes of burial, or erosion and dispersal by estuarine flows initiated the recovery process. Repeated drying cycles left the clay surface cracked and able to trap natural sediments and food on the otherwise barren surface. Colonisation of the clay plots by the mud crab, Helice crassa was important to the recovery process and depended on proximity to adjacent crab colonies. Burrowing activity by larger crabs enhanced the erosion of the clay surface while the resultant bioturbation blended the clay into the underlying sediments. Smaller crabs had less effect on erosion and bioturbation from their burrowing was mostly confined within the clay layer. Where the clay was more than 3cm thick. they did not break through the bottom of the clay and the interface between clay and sediment was still sharp after 12 months. ¹³C variations also indicated that crab burrows and