Identification and structural characterization by LC-ESI-IONTRAP and LC-ESI-TOF of some metabolic conjugation products of homovanillic acid in urine of neuroblastoma patients

The levels of urinary catecholamine metabolites, such as homovanillic acid (HVA) and vanillylmandelic acid, are routinely used as a clinical tool in the diagnosis and follow-up of neuroblastoma (NB) patients. Recently, in the Clinical Pathology Laboratory Unit of G. Gaslini Children Hospital, a commercial method that employs liquid chromatography coupled to electrochemical detection (LC-EC) has been introduced for the measurement of these metabolites in the routine laboratory practice. Using this LC-EC method, an unknown peak could be observed only in samples derived from NB patients. To investigate the nature of this peak, we used a combination of liquid chromatography-time-of-flight mass spectrometry (LC-TOF-MS) and liquid chromatography-ion trap tandem mass spectrometry (LC-IT-MS). The first approach was used to obtain the elemental composition of the ions present in this new signal. To get additional structural information useful for the elucidation of unknown compounds, the ion trap analyzer was exploited. We were able to identify not just one, but three unknown signals in urine samples from NB patients which corresponded to three conjugated products of HVA: HVA sulfate and two glucuronoconjugate isomers. The enzymatic hydrolysis with β-glucuronidase confirmed the proposed structures, while the selective alkaline hydrolysis allowed us to distinguish the difference between phenol- and acyl-glucuronide of HVA. The latter was the unknown peak observed in LC-EC separations of urine samples from NB patients.     

Gas-phase doubly charged complexes of cyclic peptides with copper in +1, +2 and +3 formal oxidation states: formation, structures and electron capture dissociation

Copper complexes with a cyclic D-His-β-Ala-L-His-L-Lys and all-L-His-β-Ala-His-Lys peptides were generated by electrospray which were doubly charged ions that had different formal oxidation states of Cu(I), Cu(II) and Cu(III) and different protonation states of the peptide ligands. Electron capture dissociation showed no substantial differences between the D-His and L-His complexes. All complexes underwent peptide cross-ring cleavages upon electron capture. The modes of ring cleavage depended on the formal oxidation state of the Cu ion and peptide protonation. Density functional theory (DFT) calculations, using the B3LYP with an effective core potential at Cu and M06-2X functionals, identified several precursor ion structures in which the Cu ion was threecoordinated to pentacoordinated by the His and Lys side-chain groups and the peptide amide or enolimine groups. The electronic structure of the formally Cu(III) complexes pointed to an effective Cu(I) oxidation state with the other charge residing in the peptide ligand. The relative energies of isomeric complexes of the [Cu(c-HAHK + H)](2+) and [Cu(c-HAHK - H)](2+) type with closed electronic shells followed similar orders when treated by the B3LYP and M06-2X functionals. Large differences between relative energies calculated by these methods were obtained for open-shell complexes of the [Cu(c-HAHK)](2+) type. Charge reduction resulted in lowering the coordination numbers for some Cu complexes that depended on the singlet or triplet spin state being formed. For [Cu(c-HAHK - H)](2+) complexes, solution H/D exchange involved only the N-H protons, resulting in the exchange of up to seven protons, as established by ultra-high mass resolution measurements. Contrasting the experiments, DFT calculations found the lowest energy structures for the gas-phase ions that were deprotonated at the peptide C(α) positions.     

Essential Oil from Eucalyptus globulus (Labill.) Activates Complement Receptor-Mediated Phagocytosis and Stimulates Podosome Formation in Human Monocyte-Derived Macrophages

Eucalyptus essential oil and its major constituent eucalyptol are extensively employed in the cosmetic, food, and pharmaceutical industries and their clinical use has recently expanded worldwide as an adjuvant in the treatment of infective and inflammatory diseases. We previously demonstrated that essential oil from Eucalyptus globulus (Labill.) (EO) stimulates in vitro the phagocytic activity of human monocyte-derived macrophages and counteracts the myelotoxicity induced by the chemotherapeutic 5-fluorouracil in immunocompetent rats. Here we characterize some mechanistic aspects underlying the immunostimulatory ability exerted by EO on macrophages. The internalization of fluorescent beads, fluorescent zymosan BioParticles, or apoptotic cancer cells was evaluated by confocal microscopy. Pro-inflammatory cytokine and chemokine release was determined by flow cytometry using the BD cytometric bead array. Receptor involvement in EO-stimulated phagocytosis was assessed using complement- or IgG-opsonized zymosan particles. The localization and expression of podosome components was analyzed by confocal microscopy and western blot. The main results demonstrated that: EO-induced activation of a macrophage is ascribable to its major component eucalyptol, as recently demonstrated for other cells of innate immunity; EO implements pathogen internalization and clearance by stimulating the complement receptor-mediated phagocytosis; EO stimulates podosome formation and increases the expression of podosome components. These results confirm that EO extract is a potent activator of innate cell-mediated immunity and thereby increase the scientific evidence supporting an additional property of this plant extract besides the known antiseptic and anti-inflammatory properties.     

Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement

This research focuses on the thermal characterization of 3D-printed parts obtained via fused filament fabrication (FFF) technology, which uses a poly(lactic acid) (PLA)-based filament filled with milled carbon fibers (MCF) from pyrolysis at different percentages by weight (10, 20, 30 wt%). Differential scanning calorimetry (DSC) and thermal conductivity measurements were used to evaluate the thermal characteristics, morphological features, and heat transport behavior of the printed specimens. The experimental results showed that the addition of MCF to the PLA matrix improved the conductive properties. Scanning electron microscopy (SEM) micrographs were used to obtain further information about the porosity of the systems.     

An Easy Access to Furan-Fused Polyheterocyclic Systems

Nitrostilbenes characterized by two different or differently substituted aryl moieties can be obtained from the initial ring-opening of 3-nitrobenzo[b]thiophene with amines. Such versatile building blocks couple the well-recognized double electrophilic reactivity of the nitrovinyl moiety (addition to the double bond, followed by, e.g., intramolecular replacement of the nitro group) with the possibility to exploit a conjugated system of double bonds within an electrocyclization process. Herein, nitrostilbenes are reacted with different aromatic enols provided by a double (carbon and oxygen) nucleophilicity, leading to novel, interesting naphthodihydrofurans. From these, as a viable application, aromatization and electrocyclization lead in turn to valuable polycondensed, fully aromatic O-heterocycles.     

On the convergence properties of sampling Durrmeyer-type operators in Orlicz spaces

Here, we provide a unifying treatment of the convergence of a general form of sampling-type operators, given by the so-called sampling Durrmeyer-type series. The main result consists of the study of a modular convergence theorem in the general setting of Orlicz spaces $L^{\phi }(\mathbb{R})$. From the latter theorem, the convergence in $L^p(\mathbb{R})$, in $L^{\alpha }{\log }^{\beta }L$, and in the exponential spaces can be obtained as particular cases. For the completeness of the theory, we provide a pointwise and uniform convergence theorem on $\mathbb{R}$, in case of bounded continuous and bounded uniformly continuous functions; in this context, we also furnish a quantitative estimate for the order of approximation, using the modulus of continuity of the function to be approximated. Finally, applications and examples with graphical representations are given for several sampling series with special kernels.     

Pushing Up the Size Limit of Boron-doped peri-Acenes: Modular Synthesis and Characterizations

Heteroatom-doped peri-acenes (PAs) have recently attracted considerable attention considering their fascinating physical properties and chemical stability. However, the precise sole addition of boron atoms along the zigzag edges of PAs remains challenging, primarily due to the limited synthetic approach. Herein, we present a novel one-pot modular synthetic strategy toward unprecedented boron-doped PAs (B-PAs), including B-[4,2]PA ( 1 a-2 ), B-[4,3]PA ( 1 b-2 ) and B-[7,2]PA ( 1 c-3 ) derivatives, through efficient intramolecular electrophilic borylation. Their chemical structures are unequivocally confirmed with a combination of mass spectrometry, NMR, and single-crystal X-ray diffraction analysis. Notably, 1 b-2 exhibits an almost planar geometry, whereas 1 a-2 displays a distinctive bowl-like distortion. Furthermore, the optoelectronic properties of this series of B-PAs are thoroughly investigated by UV/Vis absorption and fluorescence spectroscopy combined with DFT calculation. Compared with their parent all-carbon analogs, the obtained B-PAs exhibit high stability, wide energy gaps, and high photoluminescence quantum yields of up to 84 %. This study reveals the exceptional ability of boron doping to finely tune the physicochemical properties of PAs, showcasing their potential applications in optoelectronics.     

Flame surface modification of polyethylene sheets

High density polyethylene sheets 2 mm thick were flame treated to modify the surface properties. Sheets treated using a flame with air to gas (methane) ratio ∼ 10:1 at different distances between the inner cone tip of the flame and the polymer surface were investigated. Grafting of selected monomers as maleic anhydride, acrylamide and glycidyl methacrylate was attempted by flame treatment of sheets covered with a monomer layer. Good grafting results were obtained with acrylamide and maleic anhydride. The surface temperature-time dependence during the flame treatment was measured with a high resolution thermocouple. Scanning Electron Microscopy (SEM) allowed evidencing a modified thickness of about 120 μ. The chemical surface modification was studied by X ray Photoelectron Spectroscopy (XPS) and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFT). The hydroxyl, carbonyl and carboxyl content was measured after derivatization with reagents containing an elemental tag to facilitate XPS analysis of surface functional groups. In comparison to the untreated polyethylene, wetting tension and contact angle of the flamed materials showed a strong variation. This variation was almost independent of the distance between the flame and the polymer surface. Adhesion between treated polyethylene and a polyurethane adhesive was determined using T-peel test measurements. High adhesion levels were found with flame treated polyethylene at 5 mm distance. XPS results indicate that when adhesion is high, the hydroxyl is in excess compared to the other measured functions, i.e. carbonyl and carboxyl species.