Electrochemical characterization of core@shell CoFe2O4/Au composite

Quantum dots (QDs) have received considerable attention due to their unique optical and electrical properties. Although substantial research has focused on the potential applications and toxicological impacts of QDs, far less effort has been directed toward understanding their fate and transport in the environment. In this work, the effect of four coatings, polyethylene glycol functionalized polymer (PEGP), carboxyl derivatized polymer (COOHP), linoleic acid (LA), and polyacrylic acid-octylamine (PAA-OA), on the transport and retention of QDs in porous media were evaluated under environmentally relevant conditions. Aqueous QD suspensions (ca. 10 nM) were introduced into water-saturated columns packed with 40–50 mesh Ottawa sand at a pore-water velocity of 7.6 m/day. At an ionic strength (IS) of 3 mM and pH of 7, PEGP-coated QDs were completely retained within the column, while more than 60 % of COOHP-coated QDs were transported through a column run under identical conditions. When PAA-OA and LA were used as coatings, effluent QD recoveries increased to more than 65 and 89 % of the injected mass, respectively. Additionally, a decrease in pH from 9.5 to 5.0, or an increase of IS from 0 to 30 mM reduced the eluted mass of PAA-OA-coated QDs by more than 2 and 15 times, respectively. The relative mobility of coated QDs (LA > PAA-OA > COOHP > PEGP) was consistent with total interaction energy profiles between QDs and sand surfaces calculated based on Derjaguin–Landau–Verwey–Overbeek (DLVO) theory. At an IS of 3 mM (NaCl) and pH 7, a linear correlation was obtained between the fraction of eluted QDs and the magnitude of the primary interaction energy barrier. These findings demonstrate the strong dependence of QD transport on coating type and indicate that interaction energies based on DLVO theory can be used to predict the relative mobility of QDs in porous media.     

Temporal evolution of DMS and DMSP in Antarctic Coastal Sea water

The temporal evolution of concentrations of dimethylsulphide (DMS), its precursor dimethylsulphoniopropionate (DMSP) and chlorophyll a is surveyed weekly in the water column and in a landfast ice core at a coastal station of Gerlache Inlet (Terra Nova Bay, Antarctica) from 27 November 2000 to 14 February 2001. The DMS and DMSP profile concentrations in the water column are similar and show a clear temporal trend, with minimum values (<0.7?nM) at all depths occurring on 27 November 2000 and maximum values (4.8 × 10²?nM for DMS and 1.8 × 10²?nM for DMSP) in surface water on 27 December 2000 for DMS and on 19 December 2000 for DMSP. When the sea-ice cover is present, the temporal evolution of DMSP closely follows that of chlorophyll a in the water column, supporting the idea that DMSP, and therefore DMS, has a phytoplanktonic origin. However, when the ice cover breaks up during the late austral summer, a second phytoplankton bloom occurs, while the DMSP concentration in the sea-water column remains very low. In the ice core, the results show higher concentrations of DMSP than those of the underlying sea water, highlighting the important role of sea ice in the sulphur cycle of the Antarctic ecosystem.     

DSC study of stabilizing effect of antioxidant mixtures in styrene-butadiene rubber

The type of cooperation between antioxidants in the binary mixtures of four substituted diphenylamines and phenotiazine in the stabilization of styrene-butadiene rubber has been tested. Thermooxidation of the samples has been studied by differential scanning calorimetry under non-isothermal conditions. The protection factors of the individual stabilizers and their mixtures were determined. The synergy factors were applied to asses the type of cooperation of antioxidants in the mixtures. From their values it can be concluded that the type of cooperation depends on temperature. The highest synergistic effect has been observed for the mixture of phenotiazine and [4-(1-methyl-1-phenyl-ethyl)-phenyl]-phenylamine.     

Improving charge transport in poly(3‐hexylthiophene) transistors via blending with an alkyl‐substituted phenylene–thiophene–thiophene–phenylene molecule

A prototypical semiconducting bicomponent system consisting of a conjugated polymer, that is, poly(3‐hexylthiophene) (P3HT), blended with a small thiophene containing conjugated molecule, that is, an alkyl‐substituted bisphenyl‐bithiophene [phenylene–thiophene–thiophene–phenylene (PTTP)], has been used as an electroactive active layer in field‐effect transistors (FETs). The self‐assembly of this bicomponent system at surfaces has been studied at different length scales, from the nanoscale to the macroscale, and compared with the behavior of monocomponent films of PTTP and P3HT. The correlation between morphology and electric properties of the semiconducting material is explored by fabricating prototypes of FETs varying the relative concentrations of the two‐component blend. The maximum charge carrier mobility value, achieved with a few percent of PTTP component, is not simply due to a uniform dispersion of the molecules in the polymer matrix, but rather to the generation of very long percolation paths, whose composition and electrical properties can be tuned with the PTTP concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Navier–Stokes simulations in gappy PIV data

Velocity measurements conducted with particle image velocimetry (PIV) often exhibit regions where the flow motion cannot be evaluated. The principal reasons for this are the absence of seeding particles or limited optical access for illumination or imaging. Additional causes can be laser light reflections and unwanted out-of-focus effects. As a consequence, the velocity field measured with PIV contains regions where no velocity information is available, that is gaps. This work investigates the suitability of using the unsteady incompressible Navier–Stokes equations to obtain accurate estimates of the local transient velocity field in small gaps; the present approach applies to time-resolved two-dimensional experiments of incompressible flows. The numerics are based on a finite volume discretization with partitioned time-stepping to solve the governing equations. The measured velocity distribution at the gap boundary is taken as time-varying boundary condition, and an approximate initial condition inside the gap is obtained via low-order spatial interpolation of the velocity at the boundaries. The influence of this I.C. is seen to diminish over time, as information is convected through the gap. Due to the form of the equations, no initial or boundary conditions on the pressure are required. The approach is evaluated by a time-resolved experiment where the true solution is known a priori. The results are compared with a boundary interpolation approach. Finally, an application of the technique to an experiment with a gap of complex shape is presented.     

Water flows induced by microwave electric fields in microsystems

AC electric fields are of increasing importance for the generation of fluid flows in microsystems. We analyse numerically the use of AC electric fields at microwave frequencies for electro-thermal actuation of water in microdevices. Water is heated because of its significant dielectric loss at microwave frequencies. Buoyancy and dielectric forces actuate in the liquid bulk, and the relative importance between them is studied. The microwave liquid actuation can be used for pure water as well as for water saline solutions, such as bio-fluids. Therefore, it is of interest for the Lab-on-a-Chip technology.