Room-temperature multiwavelength erbium-doped fiber ring laser employing sinusoidal phase-modulation feedback

An effective method for achieving a room-temperature multiwavelength erbium-doped fiber ring laser is presented. Simultaneous multiwavelength lasing with 0.5-nm intervals is achieved both experimentally and theoretically by addition of sinusoidal phase modulation in the ring cavity to prevent single-wavelength oscillation.     

A new minor butenolide from <Emphasis Type="Italic">Machilus odoratissima</Emphasis>

A new butenolide, designated odoratinolide (1), was isolated from the bark of the Vietnamese medicinal plant Machilus odoratissima. Its structure was determined by spectroscopic analyses.     

Poly(trialkylsilyl methacrylate)s: A family of hydrolysable polymers with tuneable erosion profiles

Polymers containing hydrolytically labile trialkylsilyl ester side groups were synthesised via a conventional and a controlled radical polymerization. The trialkylsilyl methacrylate monomer unit was chosen for its capacity to hydrolyse into basic, acid or sea water varying the hydrophilic character of the resulting polymer backbone with time. The hydrolysis or saponification reaction of the ester bond of the trialkylsilyl methacrylate was monitored through a ¹H NMR study showing the formation of siloxane side-products. Several copolymers and polymer blends were prepared as matrixes for controlled erodible systems. Their capacity to hydrolyse was demonstrated through SEM investigations with selective dissolution of free films containing hydrolysable copolymers and PMMA blends. Well-defined random and diblock copolymers with methyl methacrylate were investigated to show the effect of the microstructure on the erosion properties of the corresponding coatings. Poly(methyl methacrylate-b-tert-butyldimethylsilyl methacrylate) diblock copolymers synthesised through the RAFT process showed a better control of the erosion with a constant erosion rate over a long-time service in sea water at pH = 8.2. In addition, experiments showed that the erosion rate could be modulated by varying the molar proportion of hydrolysable side groups onto the copolymer backbone and the weight amount of copolymers mixed with PMMA in toluene solution.     

Synthesis of amorphane and cadinane sesquiterpenes from fabiana imbricata

The monoterpene (−)-isopulegol (7) has been used as a starting material for the total synthesis in eight/nine steps of two sesquiterpenes which were recently isolated from the medicinal plant Fabiana imbricata. Use of this approach has shown that a structure proposed as 3,11-amorphadiene (3) should be revised to that of 4,11-cadinadiene (18) and confirmed the structure proposed for the natural product 4-amorphen-1 1-ol (1).     

Straightforward access to new vinca-alkaloids via selective reduction of a nitrile containing anhydrovinblastine derivative

A procedure to exclusively obtain 3′S-cyanoanhydrovinblastine 12 from two naturally occurring vinca-alkaloids (catharanthine and vindoline) in one step with good yield is described. Stereoselective reductions of 12, providing straightforward access to three new vinca-alkaloids, including two diastereomers 3′S-cyano-(4′R,5′-dihydro)-anhydrovinblastine and 3′S-cyano-(4′S,5′-dihydro)-anhydrovinblastine as well as (3′S-aminomethyl)-(4′S,5′-dihydro)-anhydrovinblastine in good yields is also reported.     

Synthesis of imidazolium and pyridinium-based ionic liquids and application of 1-alkyl-3-methylimidazolium salts as pre-catalysts for the benzoin condensation using solvent-free and microwave activation

An efficient one-pot procedure for the synthesis of ionic liquids based on nitrogen-containing heterocycles, imidazolium or pyridinium under ‘green chemistry’ conditions has been described. Imidazolium salts and DBU have been found to catalyze efficiently the benzoin condensation giving good yields within very short reaction time using solvent-free microwave activation conditions.     

An oxacalix[2]arene[2]pyrimidine-bis(Zn-porphyrin) tweezer as a selective receptor towards fullerene C70

An oxacalix[2]arene[2]pyrimidine-bis(Zn^II-porphyrin) conjugate was readily prepared via nucleophilic aromatic substitution of a phenolic AB₃-Zn-porphyrin on the upper rim of a (1,3-alternate) 5,17-bis(methylsulfonyl)oxacalix[4]arene precursor. Efficient 1:1 complex formation between the ‘jaws’ bisporphyrin tweezer and fullerene C₇₀ was evidenced by ¹H NMR titrations (K = 3.0 × 10⁴ M⁻¹), while no detectable complexation could be observed with C₆₀. On the other hand, an analogous oxacalix[4]arene-bis(Cu-corrole) conjugate did not show any measurable (C₆₀ or C₇₀) fullerene binding.     

Radiolysis of 1-naphthol in aqueous solutions

The effects of absorbed doses, initial pH and 1-naphthol concentration onto its radiolysis in aqueous sulphuric and hydrochloric acids by gamma rays from ⁶⁰Co were investigated. Under the experimental conditions, 1-naphthol degradation yields increased with increasing the absorbed doses (0.3–3.0 kGy) and with decreasing the initial 1-naphthol concentration (20–1 ppm). It was found out that the hydrated electrons did not play any significant roles in 1-naphthol radiolysis, as the degradation yields were higher at pH₀ ~ 0.46 compared to those at pH₀ ~ 2.0–5.0. The corresponding radiolytic yields G(−1-naphthol) were (6.13 ± 1.00)) × 10⁻² and (5.11 ± 0.22) × 10⁻² μmol/J in sulphuric acids, (15.61 ± 3.85) × 10⁻² and (4.76 ± 0.48) × 10⁻² μmol/J in hydrochloric acids. 1-Naphthol degradation rates could be described by the kinetic equations of pseudo-first-order reactions. An empirical relation between the observed reaction constants k _D and the initial 1-naphthol concentrations was established, enabling to predict the absorbed doses required for a given treatment efficiency. Three products of 1-naphthol degradation were revealed using an HPLC/UV procedure.     

Synthesis and characterization of chemically anchored adenosine with PHEMA grafted gold nanoparticles

The synthesis of chemically anchored adenosine with biocompatible poly(2-hydroxylethyl methacrylate) grafted gold nanoparticles (Ado-i-PHEMA-g-AuNPs) was realized by employing a simple strategy. Disulfide-containing poly(2-hydroxylethyl methacrylate) (DT-PHEMA) was initially synthesized by atom transfer radical polymerization (ATRP). The formation of DT-PHEMA was confirmed by ¹H-NMR and FT-IR. The molecular weight and molecular weight distribution were found to be 9.6 kg/mol and 1.40 from GPC analysis. DT-PHEMA was subsequently used for the synthesis of PHEMA-g-AuNPs by a grafting to protocol. The grafting of DT-PHEMA on the surface of AuNPs was confirmed by FT-IR, TGA, XPS, and EDX analyses. The particle size of the PHEMA-g-AuNPs was found to be ca. 5.0 nm from HR-TEM analysis. Boronic acid was used for functionalization of PHEMA-g-AuNPs, which was then subjected for covalent immobilization with adenosine via strong interaction between free hydroxyl groups of adenosine and boronic acid. Characterization and properties of the Ado-i-PHEMA-g-AuNPs were investigated by taking advantage from FT-IR, XPS, EDX, and UV-visible spectroscopy. The Ado-i-PHEMA-g-AuNPs nanocomposite exhibits a surface plasmon resonance peak at 586 nm which is red shifted from AuNPs (521 nm), indicating significant changes of surface property upon PHEMA-adenosine immobilization onto the surface of AuNPs.