Chemical modification of chitosan under high-intensity ultrasound

Chitosan (CTS), a biocompatible, biodegradable, non-toxic polymer, dissolves in water only if pH is lowered under 6.5, when a substantial fraction of the amino groups is protonated. Its range of application has been much extended by partially depolymerising it or converting it to water-soluble derivatives. Working under high-intensity ultrasound at 17.8-18.5 kHz, using either a simple horn or a cup horn, we achieved a controlled depolymerization of CTS, also prepared in high yields several derivatives that can be useful intermediates for further chemical modification, as well as several water-soluble derivatives that lend themselves to a host of industrial applications. Compared to conventional methods, all these reactions went to completion in considerably shorter times at lower temperatures.     

A general ultrasound-assisted access to room-temperature ionic liquids

The replacement of common organic solvents by room-temperature ionic liquids (RTILs) is a topical subject in both academia and industry. In the last decades, the number of applications for RTILs has followed an exponential curve and spilled over the boundaries of chemistry. Still, one of the main drawbacks of these compounds is their difficult access. The present ultrasound-assisted method affords a general and easy access to a large variety of room-temperature ionic liquids.     

Green ultrasound-assisted extraction of carotenoids based on the bio-refinery concept using sunflower oil as an alternative solvent

A green, inexpensive and easy-to-use method for carotenoids extraction from fresh carrots assisted by ultrasound was designed in this work. Sunflower oil was applied as a substitute to organic solvents in this green ultrasound-assisted extraction (UAE): a process which is in line with green extraction and bio-refinery concepts. The processing procedure of this original UAE was first compared with conventional solvent extraction (CSE) using hexane as solvent. Moreover, the UAE optimal conditions for the subsequent comparison were optimized using response surface methodology (RSM) and ultra performance liquid chromatography – diode array detector – mass spectroscopy (UPLC–DAD–MS). The results showed that the UAE using sunflower as solvent has obtained its highest β-carotene yield (334.75 mg/l) in 20 min only, while CSE using hexane as solvent obtained a similar yield (321.35 mg/l) in 60 min. The green UAE performed under optimal extraction conditions (carrot to oil ratio of 2:10, ultrasonic intensity of 22.5 W cm^?2, temperature of 40 °C and sonication time of 20 min) gave the best yield of β-carotene.     

Towards a rigorous treatment of the Jeans-Landau-Teller method for the energy exchanges of harmonic oscillators

For classical Hamiltonian systems containing an harmonic oscillator of high frequency, one has the problem of controlling the energy exchange between the oscillator and the remaining slow degrees of freedom; under very general conditions, such an exchange turns out to be exponentially small with the frequency of the oscillator. In the Jeans-Landau-Teller method, one aims to prove the exponential dependence, and to estimate the coefficient of the exponential, by exploiting the analyticity properties of the solution of the differential equations describing the motion of the system. However, in practice, since the exact solution is not known, such properties are inferred from those of an approximate solution, with no control of the difference; this fact might a priori even invalidate the exponential dependence itself. In the present paper a rigorous treatment is given, for a particular model of interest in the domain of atomic collisions, by keeping control of the difference between the exact and the approximate solution.     

A Comparative Study on the Reinforcing Effect of Aramide and PET Short Fibers in a Natural Rubber-Based Composite

Four types of chopped fibers have been studied as reinforcement additives in a standard natural rubber based, carbon black filled formulation. The fibers studied were aramide (2 types) and polyester (2 types). The chopped fibers were added on top of the carbon black filled rubber compound at 2, 4, and 8 phr levels. The extra reinforcing effect in the modulus, especially at low elongation, the increase in hardness, the anisotropic properties, and the stiffening effects have been studied together with the evaluation of the mechanical hysteresis in strain and in compression. The permanent set of the resulting rubber compounds have been evaluated as well. The best compromise in performances and price was found for a certain type of polyester fiber.     

Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves

Ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) techniques have been employed as complementary techniques to extract oils from vegetable sources, viz, soybean germ and a cultivated marine microalga rich in docosahexaenoic acid (DHA). Ultrasound (US) devices developed by ourselves, working at several frequencies (19, 25, 40 and 300 kHz), were used for US-based protocols, while a multimode microwave (MW) oven (operating with both open and closed vessels) was used for MAE. Combined treatments were also studied, such as simultaneous double sonication (at 19 and 25 kHz) and simultaneous US/MW irradiation, achieved by inserting a non-metallic horn in a MW oven. Extraction times and yields were compared with those resulting from conventional procedures. With soybean germ the best yield was obtained with a ‘cavitating tube’ prototype (19 kHz, 80 W), featuring a thin titanium cylinder instead of a conventional horn. Double sonication, carried out by inserting an immersion horn (25 kHz) in the same tube, improved the yield only slightly but halved the extraction time. Almost comparable yields were achieved by closed-vessel MAE and simultaneous US/MW irradiation. Compared with conventional methods, extraction times were reduced by up to 10-fold and yields increased by 50–500%. In the case of marine microalgae, UAE worked best, as the disruption by US of the tough algal cell wall considerably improved the extraction yield from 4.8% in soxhlet to 25.9%. Our results indicate that US and MW, either alone or combined, can greatly improve the extraction of bioactive substances, achieving higher efficiency and shorter reaction times at low or moderate costs, with minimal added toxicity.     

C-Fe chains due to segregated carbon impurities on Fe(1 0 0)

Bulk carbon impurities segregate at the Fe(1 0 0) surface and, upon thermal annealing, can form metastable surface phases with local and long range order and peculiar electronic properties. We present a surface science study of C-segregated Fe(1 0 0) with scanning tunneling microscopy, angle resolved photoemission, and ab initio calculations of the surface structure and electron states. In particular the c(3√2 × √2) structure, observed for 0.67 atomic layers of C segregated at the iron surface, is found to be due to self-organized carbon stripes made of zig-zag chains. The strong hybridization between C and Fe was observed in ARPES spectra.     

Atomic control of water interaction with biocompatible surfaces: the case of SiC(001)

The interaction of water with Si- and C- terminated beta-SiC(001) surfaces was investigated by means of ab initio molecular dynamics simulations. Irrespective of coverage, varied from 1/4 to 1 monolayer, we found that water dissociates on the Si-terminated surface, substantially modifying the clean surface reconstruction, while the C-terminated surface is nonreactive and hydrophobic. Based on our results, we propose that STM images and photoemission experiments may detect specific changes induced by water on both the structural and electronic properties of SiC(001) surfaces.     

Applications of fractional transforms to object reconstruction from in-line holograms

We propose a method for the digital reconstruction of an object whose diffraction pattern has been recorded on a hologram. The fractional Fourier transform is used for the object reconstruction. To determine the position of the object, the fractional order is scanned. The fractional cosine and fractional Hartley transforms are also employed for object reconstruction. These two transforms are real valued and allow the reconstruction to be done with lower computing complexity. Simulations and experimental results are presented.