Emanation thermal analysis study of a sol-gel precursor for silica-titania waveguides

Emanation Thermal Analysis (ETA) was demonstrated as a tool for the characterization of microstructure changes of a sol-gel precursor for silica-titania layers deposited on the glass plate to be used as planar waveguides. Temperature ranges of 280-330 and 380-500°C, respectively, in which the densification of the layers took place, were determined by ETA under in situ conditions of the sample heating. Results of thermogravimetry were compared with the ETA data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Multiresidue determination of pesticides in drinking and related waters by gas chromatography/mass spectrometry after solid-phase extraction: interlaboratory study

As part of a project funded by the European Commission (EC) for the development and evaluation of multiresidue methods for analysis of drinking and related waters, 15 European laboratories evaluated a method using styrene-divinylbenzene co-polymer solid-phase extraction followed by gas chromatography/mass spectrometry. The main aim of the study was to evaluate whether the method meets the requirements of EC Directive 98/83 in terms of accuracy, precision, and detection limit for 22 pesticides according to the following requirements: limit of detection, < or = 0.025 microg/L; accuracy, expressed as recovery between 75 and 125%; and precision, expressed as repeatability relative standard deviation of the method of < 12.5% and as reproducibility relative standard deviation of the method of < 25%. Analyses for unknown concentrations were performed with fortified commercial bottled and tap waters. All laboratories were able to achieve detection limits of 0.01 microg/L for all pesticides except dimethoate and desisopropylatrazine (0.02 microg/L). The criteria for repeatability were met for all compounds except trifluralin, dimethoate, and lindane in bottled water and chlorpyrifos, dimethoate, and lindane in tap water. The criteria for reproducibility were met for all compounds except trifluralin, dimethoate, and lindane in bottled water and pendimethalin, chlorpyrifos, dimethoate, terbutryn, and lindane in tap water. In terms of accuracy, the method meets the requirements for all pesticides in both matrixes, except for lindane in bottled water and lindane and chlorpyrifos in tap water.     

Derivatization procedures for the detection of beta(2)-agonists by gas chromatographic/mass spectrometric analysis

An evaluation of derivatization procedures for the detection of beta(2)-agonists is presented. The study was performed with the beta(2)-agonists bambuterol, clenbuterol, fenoterol, formoterol, salbutamol, salmeterol and terbutaline. Different derivatizating agents were employed, aiming to obtain derivatives with high selectivity to be used in the gas chromatographic/mass spectrometric analysis of beta(2)-agonists in biological samples. Trimethylsilylation was compared with different agents and the role of some catalysts was evaluated. Acylation, combined trimethylsilylation and acylation, and the formation of cyclic methylboronates were also studied. Sterical hindrance caused by different substituents at the nitrogen atom of the beta-ethanolamine lateral chain of beta(2)-agonist molecules is mainly responsible for differences in the abundances of the derivatives obtained. The use of catalysts produces an increase in the derivatization yield, especially for compounds with low steric hindrance (substituents with primary and secondary carbon atoms). The formation of trimethylsilyl (TMS) ethers is not influenced by structural molecular differences when only hydroxy groups are involved in derivatization. Combined trimethylsilylation and acylation showed that compounds with a secondary carbon atom linked to the nitrogen atom form mainly N-TFA-O-TMS derivatives, with a small amount of N-TMS-O-TMS derivatives. Compounds with tert-butyl substituents at the amino group (bambuterol, salbutamol and terbutaline) formed O-TMS derivatives as the main products, although a limited amount of trifluoroacylation at the nitrogen atom also occurred. Cyclic methylboronates were formed with bambuterol, clenbuterol, formoterol, salbutamol and salmeterol. Owing to hydroxy substituents in unsuitable positions for ring formation, this procedure was not effective for fenoterol and terbutaline. Mass spectra of different derivatives and tentative fragmentation profiles are also shown. For screening purpose (e.g. sports drug testing), derivatization with MSTFA or BSTFA alone is recommended as a comprehensive derivatization technique for beta(2)-agonists owing to minimal by-product formation; formation of cyclic methylboronates can be useful for confirmation purposes. Detection limits were obtained for the TMS and cyclic methylboronate derivatives using the derivatizing reagents MSTFA and trimethylboroxine, respectively. For most of the compounds, lower detection limits were found for the TMS derivatives.     

Iron-Iridium Mixed-Metal Carbonyl Clusters: A Mössbauer Study of the Structure and of the Adsorption of [Fe2Ir2(CO)12]2− on MgO

¹⁹³Ir and ⁵⁷Fe Mössbauer spectroscopy was used to investigate the structure of the [Fe₂Ir₂(CO)₁₂]^2- cluster compound and the adsorption of this cluster on hydrated MgO. Supported samples were prepared by impregnation of the magnesia with solutions of [Et₄N]₂[Fe₂Ir₂(CO)₁₂] in acetone. The Mössbauer and FT-IR spectra of the MgO-supported cluster confirm that the bimetallic carbonyl is molecularly physisorbed onto MgO without undergoing any transformation or decomposition. The easy solvent extraction of the intact cluster from the oxide surface excludes ion pairing between the cluster anion and the Mg²⁺ surface sites. Mössbauer spectra are in agreement with the refined structure of the molecular cluster and the temperature dependence of the ⁵⁷Fe Mössbauer spectra above 80 K is consistent with the low degree of interaction of the cluster with the support. This technique, therefore, appears to be promising in order to infer structural information when X-ray determination fails.     

Mechanism of formation and decay of the compound nuclei150Gd produced by two entrance channels (16O+134Ba) and (40Ar+110Pd)

Excitation functions have been drawn for evaporation residues issued from¹⁵⁰Gd, a compound nucleus produced either by¹⁶O ions on¹³⁴Ba, or by⁴⁰Ar on¹¹⁰Pd. Absolute cross sections were measured for^145–147Gd,^145–147Eu,^141m Sm,^143m Sm,^140m Pm and^139m Nd. Complete fusion cross sections have been obtained and compared to calculated estimations based, at low energies, on the simple expressionσ _CF=πR _Fuss ² (1?V _Fus/E) whereR _Fus andV _Fus are respectively the distance and the potential for fusion atdV/dr=0. For high energies σ_CF=πR _cr ² (1?V_cr/E) with the model of critical distanceR _cr and critical potentialV _cr. Thresholds energies have been determined with a particular care. The analysis of the shape and the width of excitation functions, particularly for the emission of 4 and 5 neutrons, has been carried out and compared to calculated values. The difference between argon and oxygen induced reactions has been attributed to the difference inl population in the entrance channel.     

In situ tissue pathology from spatially encoded mass spectrometry classifiers visualized in real time through augmented reality

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data. Spatially encoded pathology classifications are displayed at the site of laser sampling as color-coded pixels in an augmented reality video feed of the surgical field of view. This is enabled by two-way communication between surgical navigation and mass spectrometry data analysis platforms through a custom-built interface. Performance of the system was evaluated using murine models of human cancers sampled in situ in the presence of body fluids with a technical pixel error of 1.0 ± 0.2 mm, suggesting a 84% or 92% (excluding one outlier) cancer type classification rate across different molecular models that distinguish cell-lines of each class of breast, brain, head and neck murine models. Further, through end-point immunohistochemical staining for DNA damage, cell death and neuronal viability, spatially encoded PIRL-MS sampling is shown to produce classifiable mass spectral data from living murine brain tissue, with levels of neuronal damage that are comparable to those induced by a surgical scalpel. This highlights the potential of spatially encoded PIRL-MS analysis for in vivo use during neurosurgical applications of cancer type determination or point-sampling in vivo tissue during tumor bed examination to assess cancer removal. The interface developed herein for the analysis and the display of spatially encoded PIRL-MS data can be adapted to other hand-held mass spectrometry analysis probes currently available.

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data.     

Structural characterization techniques for the analysis of semiconductor strained heterostructures

A combined method for structural characterization of strained epitaxial heterostructures involving different techniques such as Rutherford backscattering spectrometry (RBS), multiple crystal X-ray diffractometry (MCD) and transmission electron microscopy (TEM) is presented. In order to obtain a complete characterization of the analysed structure, three different quantities are measured independently: the epilayer thickness, the density of misfit dislocations which may appear at the interface, and the significant components of the strain tensor, mainly the tetragonal distortion, affecting the epilayer lattice. In this way the thermodynamic state and the mechanisms of plastic deformation of the structures can be fully investigated. In this contribution we present and discuss the experimental results concerning a set of InP/GaAs samples having different layer thicknesses ranging from 5 to 500 nm. The thickness of the samples has been determined by RBS. Measurements of in-plane strain and tetragonal distortion have been performed by MCD and RBS-channelling respectively, finally TEM has been used for determining the defects densities and distribution.     

High-intensity ultrasound and microwave, alone or combined, promote Pd/C-catalyzed aryl-aryl couplings

Pd-catalyzed homo- and cross-couplings of boronic acids and aryl halides were successfully carried out both in aqueous media under high-intensity ultrasound (US) and in DME under microwave (MW). Heterogeneous catalysis with Pd/C was employed, avoiding phosphine ligands and phase-transfer catalysts. In a trial series involving 15 different iodo- and bromoaryls and 7 boronic acids, both energy sources drastically reduced reaction times affording biaryls in acceptable to good yields. With palladium(II) acetate as catalyst, electron-deficient aryl chlorides also reacted, affording a few biaryls in acceptable yields. Ullmann-type zinc-mediated homocoupling of iodo- and bromoaryls in the presence of Pd/C under CO₂ atmosphere was achieved in aqueous media under US, though not under MW. Suzuki homo- and cross-couplings were also carried out in a new reactor developed in our laboratory, featuring combined US and MW irradiation, further improving a green synthetic method.