Contrasting chemoselectivities in the ultrasound and microwave assisted bromination reactions of substituted alkylaromatics with N-bromosuccinimide

Ultrasound and microwave assisted bromination reactions of various alkylaryls with N-bromosuccinimide, either neat or in water, shows diverse chemoselectivity. Thus, ring substitution occurs in water with ultrasound, whereas with microwaves both side-chain α-bromination and ring substitution occur. With neat reactants, side-chain α-bromination predominates for microwave assisted reactions. In the presence of water the chemoselectivity with microwave-promoted bromination is similar to that observed using classical methods.     

Synthesis and spectroscopic characterization of new triorganotin(IV) complexes with the bis(1‐methyl‐1H‐imidazol‐2‐ylthio)acetate ligand: effects on trout erythrocyte components

Triorganotin(IV) derivatives containing the anionic ligand bis(1‐methyl‐1H‐imidazol‐2‐ylthio)acetate [(S‐tim)₂CHCO₂]⁻ were synthesized from the reaction between R₃SnCl acceptors (R = Me and Ph) and the sodium salt of the ligand. Mono‐nuclear complexes of the type [(S‐tim)₂CHCO₂]SnR₃ were obtained, which were fully characterized by elemental analyses and FT‐IR in the solid state, and by NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy and electrospray ionization mass in solution. The toxic effects shown by these compounds on trout erythrocyte components showed that the toxicity of the organotin(IV) complexes depends on the nature and on the lipophilicity of the substituents on the metal centre. Copyright © 2007 John Wiley & Sons, Ltd.     

Exploring the reaction of iodine with α‐diazo esters

In this paper we describe the unprecedented reaction between α‐diazo esters 1 and iodine. The reaction, carried out in the presence of aqueous NaHCO₃, afforded the Z‐isomer of the corresponding unsaturated‐2‐iodo ester 8 . The configuration of compounds 8 was determined using the ³J_{C? H} coupling between carbonyl carbon atom and alkene proton. Mechanistic considerations accounting for the observed phenomena and including quantum chemical calculations are proposed. Copyright © 2008 John Wiley & Sons, Ltd.     

Compact sub-100-fs Nd:silicate laser

We present a compact Nd:silicate laser pumped by a single 1-W high-brightness commercial laser diode that generates pulses as short as 88 fs (nearly Fourier limited) when passively mode-locked with a saturable absorber mirror. We also tested a prismless cavity setup employing a single Gires-Tournois mirror, yielding 100-fs pulses. These setups are significantly simpler and more compact than those reported previously for short pulse Nd:silicate lasers.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Microwave Irradiation in Micro‐ Meso‐Fluidic Systems; Hybrid Technology has Issued the Challenge

A combination of microwave irradiation and flow chemistry has been described as a promising smart and hyphenated technology that can fuse and synergize the benefits of the techniques. The cells and tissues of all living organisms promote a huge number of bioorganic reactions that occur as flow systems and not the batch‐type conditions typically used by chemists and biotechnologists. Microwave‐assisted chemical conversion carried out in continuous flow mode with micro‐ or meso‐channel reactors can offer significant processing advantages, including improved thermal exchange, energy efficiency, safety, mixing control, a wider range of reaction conditions, repeatability and scalability as well as dramatic reductions in side‐reactions and degradations. This review will discuss relevant examples of organic synthesis and nanoparticles production performed in continuous flow mode with integrated microwave irradiation in micro‐ or mesofluidic systems.     

Structural insights into methyl‐ or methoxy‐substituted 1‐(α‐aminobenzyl)‐2‐naphthol structures: the role of C—H…π interactions

Aminobenzylnaphthols are a class of compounds containing a large aromatic molecular surface which makes them suitable candidates to study the role of C—H…π interactions. We have investigated the effect of methyl or methoxy substituents on the assembling of aromatic units by preparing and determining the crystal structures of (S,S)‐1‐{(4‐methylphenyl)[(1‐phenylethyl)amino]methyl}naphthalen‐2‐ol, C₂₆H₂₅NO, and (S,S)‐1‐{(4‐methoxyphenyl)[(1‐phenylethyl)amino]methyl}naphthalen‐2‐ol, C₂₆H₂₅NO₂. The methyl group influenced the overall crystal packing even if the H atoms of the methyl group did not participate directly either in hydrogen bonding or C—H…π interactions. The introduction of the methoxy moiety caused the formation of new hydrogen bonds, in which the O atom of the methoxy group was directly involved. Moreover, the methoxy group promoted the formation of an interesting C—H…π interaction which altered the orientation of an aromatic unit.     

Toward a Greener World—Cyclodextrin Derivatization by Mechanochemistry

Cyclodextrin (CD) derivatives are a challenge, mainly due to solubility problems. In many cases, the synthesis of CD derivatives requires high-boiling solvents, whereas the product isolation from the aqueous methods often requires energy-intensive processes. Complex formation faces similar challenges in that it involves interacting materials with conflicting properties. However, many authors also refer to the formation of non-covalent bonds, such as the formation of inclusion complexes or metal–organic networks, as reactions or synthesis, which makes it difficult to classify the technical papers. In many cases, the solubility of both the starting material and the product in the same solvent differs significantly. The sweetest point of mechanochemistry is the reduced demand or complete elimination of solvents from the synthesis. The lack of solvents can make syntheses more economical and greener. The limited molecular movements in solid-state allow the preparation of CD derivatives, which are difficult to produce under solvent reaction conditions. A mechanochemical reaction generally has a higher reagent utilization rate. When the reaction yields a good guest co-product, solvent-free conditions can be slower than in solution conditions. Regioselective syntheses of per-6-amino and alkylthio-CD derivatives or insoluble cyclodextrin polymers and nanosponges are good examples of what a greener technology can offer through solvent-free reaction conditions. In the case of thiolated CD derivatives, the absence of solvents results in significant suppression of the thiol group oxidation, too. The insoluble polymer synthesis is also more efficient when using the same molar ratio of the reagents as the solution reaction. Solid reactants not only reduce the chance of hydrolysis of multifunctional reactants or side reactions, but the spatial proximity of macrocycles also reduces the length of the spacing formed by the crosslinker. The structure of insoluble polymers of the mechanochemical reactions generally is more compact, with fewer and shorter hydrophilic arms than the products of the solution reactions.     

Adulteration of Essential Oils: A Multitask Issue for Quality Control. Three Case Studies: Lavandula angustifolia Mill., Citrus limon (L.) Osbeck and Melaleuca alternifolia (Maiden & Betche) Cheel

The quality control of essential oils (EO) principally aims at revealing the presence of adulterations and at quantifying compounds that are limited by law by evaluating EO chemical compositions, usually in terms of the normalised relative abundance of selected markers, for comparison to reference values reported in pharmacopoeias and/or international norms. Common adulterations of EO consist of the addition of cheaper EO or synthetic materials. This adulteration can be detected by calculating the percent normalised areas of selected markers or the enantiomeric composition of chiral components. The dilution of the EO with vegetable oils is another type of adulteration. This adulteration is quite devious, as it modifies neither the qualitative composition of the resulting EO nor the marker’s normalised percentage abundance, which is no longer diagnostic, and an absolute quantitative analysis is required. This study aims at verifying the application of the two above approaches (i.e., normalised relative abundance and absolute quantitation) to detect EO adulterations, with examples involving selected commercial EO (lavender, bergamot and tea tree) adulterated with synthetic components, EO of different origin and lower economical values and heavy vegetable oils. The results show that absolute quantitation is necessary to highlight adulteration with heavy vegetable oils, providing that a reference quantitative profile is available.     

Determination of Se, As, Cu, Pb, Cd, Zn and Mn by anodic and cathodic stripping voltammetry in marine environmental matrices in the presence of reciprocal interference. Proposal of a new analytical procedure

Arsenic(III), selenium(IV), copper(II), lead(II), cadmium(II), zinc(II) and manganese(II) have been determined in environmental matrices by differential pulse cathodic (DPCSV) and anodic (DPASV) stripping voltammetry. The voltammetric measurements were carried out using a conventional three-electrode cell and the ammonia–ammonium chloride buffer (pH 9.4) as the supporting electrolyte. The analytical procedure was verified by the analysis of the standard reference materials: Sea Water BCR-CRM 403; Lagarosiphon Major BCR-CRM 060; and Cod Muscle BCR-CRM 422. The precision, expressed as relative standard deviation, and the accuracy, expressed as relative error, were, in all cases, lower than 5%; the detection limits, for each element in the experimental conditions employed, was approximately 10⁻⁹ M. The standard addition technique significantly improved the resolution of the voltammetric method, even in the case of very high metal concentration ratios.