Methodology of chemometric modeling of spectrometric signals in the analysis of complex samples

A generalized algorithm of the multivariate simulation of spectrometric data is considered for solving typical analytical problems, like the determination of the concentration of a particular analyte and the assignment of a sample to one of predefined classes. In particular, we considered preliminary data processing, exploratory analysis, optimization of a chemometric model, calculation of performance characteristics, transfer of the model to other spectrometers, and automation of chemometric processing for the routine analysis of samples. To illustrate the potential of the method, we selected a system of bovine and porcine heparin, mixtures of soy and sunflower lecithin, and a set of red and white wine samples as test samples. Partial least squares and discriminant analysis were used as chemometric methods. We used proton nuclear magnetic resonance (1H NMR) to record signals. Using the MATLAB environment, chemometric programs were developed for automated data processing in the context of problems under consideration and for the transfer of multivariate models to other spectrometers. Based on the results obtained, a methodology is proposed for the multivariate analysis of spectrometric data, which can be used in the analysis of various types of matrices and spectrometric signals.     

Chromatographic determination of nitrophenols in aqueous media after two-stage preconcentration using an N-vinylpyrrolidone-based polymer

Two-stage procedures for the preconcentration of nitrophenols (4-nitrophenol, 2,4- and 2,5-dinitrophenol, and 2,4,6-trinitrophenol) from aqueous solutions are proposed. At the first stage, the preconcentration and desorption of nitrophenols under dynamic conditions is carried out. At the second stage, depending on the nature of the desorption solution, the eluate is evaporated (acetonitrile) or saturated with ammonium sulfate and extracted with acetone (aqueous NH₃ solution). The concentration factors are 4000 and 910, respectively. Nitrophenols are determined in concentrates by thin layer chromatography and HPLC, the limits of detection are 1.0–1.8 and 0.25–0.45 μg/L, respectively. The duration of analysis is 200 min.     

Mechanism of reaction of selenium elimination in diacetophenonyl selenide under the action of reduced glutathione

Products of reaction between the organoselenium xenobiotic, diacetophenonyl selenide (1,5-diphenyl-3-selenapenta-1,5-dione), and reduced glutathione at different molar ratios and pH values were studied by HPLC and TLC. Reaction intermediates, S-(acetophenylselenyl)glutathione and glutathione selenodisulfide, and reaction products, acetophenone and hydroselenide anion, were detected. The reaction scheme proposed earlier was confirmed.     

Molecular dynamics and pharmacophore modelling studies of different subtype (ALK and EGFR (T790M)) inhibitors in NSCLC

Extensively validated 3D pharmacophore models for ALK (anaplastic lymphoma kinase) and EGFR (T790M) (epithelial growth factor receptor with acquired secondary mutation) were developed. The pharmacophore model for ALK (r² = 0.96, q² = 0.692) suggested that two hydrogen bond acceptors and three hydrophobic groups arranged in 3-D space are essential for the binding affinity of ALK inhibitors. Similarly, the pharmacophore model for EGFR (T790M) (r² = 0.92, q² = 0.72) suggested that the presence of a hydrogen bond acceptor, two hydrogen bond donors and a hydrophobic group plays vital role in binding of an inhibitor of EGFR (T790M). These pharmacophore models allowed searches for novel ALK and EGFR (T790M) dual inhibitors from multiconformer 3D databases (Asinex, Chembridge and Maybridge). Finally, the eight best hits were selected for molecular dynamics simulation, to study the stability of their complexes with both proteins and final binding orientations of these molecules. After molecular dynamics simulations, one hit has been predicted to possess good binding affinity for both ALK and EGFR (T790M), which can be further investigated for its experimental in-vitro/in-vivo activities.     

Exploration of antioxidant activity of newly synthesized azo flavones and its correlation with electrochemical parameters along with the study of their redox behaviour

A series of 7-hydroxy-2-aryl-3-(2-aryldiazenyl)-4H-chromen-4-one derivatives was synthesized in quantitative yields. Herein, we demonstrate the antioxidant potential of the synthesized substituted azo flavones using 1,1-diphenyl-2-picryl-hydrazyl assay method along with the evaluation of their redox behaviour by cyclic voltammetry. The synthesized compounds manifested good antioxidant potential as compared to standard antioxidant ascorbic acid, which especially pertains to the compounds having methoxy and hydroxyl groups. A good correlation between minimum inhibitory concentration (IC₅₀) and deduced electrochemical parameter, i.e., half peak oxidation potential (E _p/2) values, was established.     

Primary photophysical and photochemical processes for Pt(SCN)<Subscript>6</Subscript><Superscript>2–</Superscript> complex

Photosolvation of a Pt^IV hexathiocyanate complex Pt(SCN)₆ ^2– in water and ethanol was studied by steady-state photolysis, nanosecond laser flash photolysis, and ultrafast kinetic spectroscopy. Complexes Pt(SCN)₅(H₂O)^– and Pt(SCN)₅(C₂H₅OH)^– were found to be the only reaction products. The quantum yields of photosolvation are independent of the excitation wavelength, being equal to 0.25 and 0.5 for the solutions of the complex in water and ethanol, respectively. Photosolvation proceeds by the mechanism of heterolytic metal—ligand bond dissociation without involvement of redox processes. The characteristic time of formation of the end products for both solvents is about 10 ps. Three successive intermediates detected on the picosecond time scale were interpreted as Pt^IV complexes. The nature of the intermediates and possible mechanisms of photosolvation are discussed.     

Foreword

Electrochemical behaviors of U⁴⁺ in LiCl–KCl–UF₄ eutectic and deposition of U metal were investigated. It was found that the presence of F^? has influence on the diffusion of U³⁺ and U⁴⁺ as comparing to data obtained in pure chloride molten salts. Electrochemical deposition of U was carried out by using pulse current electrolysis. Characterization results indicate that U metal was obtained at the cathode, implying U metal can be directly deposited from LiCl–KCl–UF₄ eutectic in this case and the extractive ratio is calculated to be 98%. Our results demonstrate feasible separation of U from LiCl–KCl–UF₄ molten salt by electrochemical method.     

Developments in liquid-crystalline dimers and oligomers

ABSTRACT

Liquid-crystalline dimers and bimesogens have attracted much attention due to their propensity to exhibit the spontaneously chiral twist-bend mesophase (N_TB), most often by dimers with methylene spacers. Despite their relative ease of synthesis, the number of ether-linked twist-bend materials significantly lags behind those of methylene-linked compounds. In this work, we have prepared and studied a range of ether-linked bimesogens homologous in structure to the FFO9OCB; as with methylene-linked systems, it appears that it is molecular topology and the gross molecular shape that are the primary drivers for the formation of this phase of matter. Dimers and bimesogens are well studied within the context of the twist-bend phase; however, present understanding of this mesophase in oligomeric systems lags far behind. We report our recent efforts to prepare further examples of oligomeric twist-bend nematogens, including further examples of our ‘n+1’ methodology, which may allow the synthesis of high-purity, monodisperse materials of any given length to be prepared. We have observed that there is a tendency for these materials to exhibit highly ordered soft-crystalline mesophases as opposed to the twist-bend phase.     

DRBEM solution of biomagnetic fluid flow and heat transfer in cavities-CMMSE2016

In this paper, we investigate the fully developed, laminar, forced convection flow of an electrically non-conducting, viscous, biomagnetic fluid in the 2D cross-section (cavity) of a long impermeable pipe. The fluid is under the influence of a point magnetic source placed below the cavity. The dual reciprocity boundary element method (DRBEM) with constant and linear elements is used for solving the governing equations resulting from the Navier–Stokes and energy equations together with magnetization and buoyancy forces. The fundamental solution of Laplace equation is made use of converting differential equations to boundary integral equations by taking all the terms other than Laplacian as inhomogeneity in the Poisson’s equations for the velocity components, pressure and the temperature of the fluid. The unknown pressure boundary conditions are approximated through momentum equations by using finite difference approximation for the pressure gradients and DRBEM coordinate matrix for the other terms. All the space derivatives are also calculated by DRBEM coordinate matrix which is one of the main advantages of DRBEM. Pipe axis velocity is also computed. The effects of magnetization and the buoyancy force on the fluid with or without viscous dissipation term in the energy equation are investigated in square and lid-driven cavities for several values of magnetic (Mn) and Rayleigh (Ra) numbers. It is observed that the flow and heat transfer are significantly affected with increasing values of Mn and Ra. DRBEM gives small sized linear systems due to its boundary only nature at a considerably low computational expense.     

Molecular Cloning and Characteristic Features of a Novel Extracellular Tyrosinase from <Emphasis Type="Italic">Aspergillus niger</Emphasis> PA2

Biofertilizers have been widely used in many countries for their benefit to soil biological and physicochemical properties. A new microbial biofertilizer containing Phanerochaete chrysosporium and Bacillus thuringiensis was prepared to decrease nicotine content in tobacco leaves by regulating soil nitrogen supply. Soil NO₃ ^?-N, NH₄ ⁺-N, nitrogen supply-related enzyme activities, and nitrogen accumulation in plant leaves throughout the growing period were investigated to explore the mechanism of nicotine reduction. The experimental results indicated that biofertilizer can reduce the nicotine content in tobacco leaves, with a maximum decrement of 16–18 % in mature upper leaves. In the meantime, the total nitrogen in mature lower and middle leaves increased with the application of biofertilizer, while an opposite result was observed in upper leaves. Protein concentration in leaves had similar fluctuation to that of total nitrogen in response to biofertilizer. NO₃ ^?-N content and nitrate reductase activity in biofertilizer-amended soil increased by 92.3 and 42.2 %, respectively, compared to those in the control, whereas the NH₄ ⁺-N and urease activity decreased by 37.8 and 29.3 %, respectively. Nitrogen uptake was improved in the early growing stage, but this phenomenon was not observed during the late growth period. Nicotine decrease is attributing to the adjustment of biofertilizer in soil nitrogen supply and its uptake in tobacco, which result in changes of nitrogen content as well as its distribution in tobacco leaves. The application of biofertilizer containing P. chrysosporium and B. thuringiensis can reduce the nicotine content and improve tobacco quality, which may provide some useful information for tobacco cultivation.