Hydrogen-bonded networks from η-semiquinone complexes of manganese tricarbonyl

The cationic manganese tricarbonyl complexes containing η⁶-2-methylhydroquinone (2a), η⁶-2,3-dimethylhydroquinone (3a), η⁶-2-t-butylhydroquinone (4a), η⁶-tetramethylhydroquinone (5a) and η⁶-4,4′-biphenol (6a) are readily deprotonated to the corresponding neutral (η⁵-semiquinone)Mn(CO)₃ (2b-6b) and anionic (η⁴-quinone)Mn(CO)₃⁻ (2c-5c) complexes. The X-ray structures of 2b-6b feature strong intermolecular hydrogen bonding interactions that result in the formation of supramolecular organometallic networks. Significantly, the substitution pattern at the semiquinone ring affects the stereochemistry of the hydrogen bonding interactions. NMR spectra of 2b, 3b and 5b reveal dynamic hydrogen bonding in solution.     

Optimization of Solution Condition for an Effective Electrochemical Reduction of N2O

An effective electrochemical reduction of nitrous oxide (N₂O) is established by controlling solution compositions in this study. N₂O was electrochemically reduced varying solvent composition and supporting electrolytes (K₂SO₄ and Na₂SO₄) concentrations. The differences in reduction current density and solution resistance were analyzed via linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS), respectively, depending on solution conditions. UV‐Vis spectroscopy was adopted to measure the solubility of N₂O. As a result, among the conditions investigated in this study, 300 mM of K₂SO₄ and aqueous based solution were revealed as an optimum condition for the electrochemical N₂O reduction. At 300 mM of K₂SO₄, the highest current density was obtained due to a high conductance of the electrolyte and a moderate solubility of N₂O.     

Mass–yield distributions of fission products from photo-fission of natPb induced by 50–70 MeV bremsstrahlung

The mass–yield distributions of various fission products have been determined in the 50-, 60- and 70-MeV end point bremsstrahlung induced fission of ^natPb using off-line γ-ray spectrometric technique in the electron linac at Pohang Accelerator Laboratory, Korea. The mass–yield distributions are symmetric with average mass of 102.34, 102.25 and 102.03 and FWHM of 21, 22 and 23 mass unit, respectively. From the present data and literature data in the 50–85 MeV bremsstrahlung induced fission of ²⁰⁹Bi the following observations were obtained: (i) The average masses of the yield distributions in the 50–85 MeV bremsstrahlung induced fission of ^natPb and ²⁰⁹Bi are around 102.25 ± 0.25 and 103 ± 0.5, respectively. (ii) The FWHM of the mass–yield distributions increases from about 21 mass units at 50 MeV to 23 mass units at 70–85 MeV, which is explained from the point of increase in multi-chance fission probability with increasing excitation energy. (iii) Within the bremsstrahlung energy range of 50–85 MeV, the role of nuclear structure effect in the mass–yield distribution was observed in the photo-fission of ²⁰⁹Bi, whereas it was not seen in case of ^natPb. This may be due to the presence of so many isotopes in ^natPb unlike mono-isotopic ²⁰⁹Bi.     

Optimizing Dilute-Acid Pretreatment of Rapeseed Straw for Extraction of Hemicellulose

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars prior to fermentation. Hydrolysis can be performed enzymatically or with mineral acids. In this study, dilute sulfuric acid was used as a catalyst for the pretreatment of rapeseed straw. The purpose of this study is to optimize the pretreatment process in a 15-mL bomb tube reactor and investigate the effects of the acid concentration, temperature, and reaction time. These parameters influence hemicellulose removal and production of sugars (xylose, glucose, and arabinose) in the hydrolyzate as well as the formation of by-products (furfural, 5-hydroxymethylfurfural, and acetic acid). Statistical analysis was based on a model composition corresponding to a 3³ orthogonal factorial design and employed the response surface methodology to optimize the pretreatment conditions, aiming to attain maximum xylan, mannan, and galactan (XMG) extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: H₂SO₄ concentration of 1.76% and temperature of 152.6 °C with a reaction time of 21 min. Under these optimal conditions, 85.5% of the total sugar was recovered after acid hydrolysis (78.9% XMG and 6.6% glucan). The hydrolyzate contained 1.60 g/L glucose, 0.61 g/L arabinose, 10.49 g/L xylose, mannose, and galactose, 0.39 g/L cellobiose, 0.94 g/L fructose, 0.02 g/L 1,6-anhydro-glucose, 1.17 g/L formic acid, 2.94 g/L acetic acid, 0.04 g/L levulinic acid, 0.04 g/L 5-hydroxymethylfurfural, and 0.98 g/L furfural.     

Evaluation of biological monitoring markers using genomic and proteomic analysis for automobile emission inspectors and waste incinerating workers exposed to polycyclic aromatic hydrocarbons or 2,3,7,8,-tetracholrodedibenzo-p-dioxins

In this study, we investigated the effects of PAHs and dioxin on mRNA and plasma protein expression using genomic and proteomic analysis for automobile emission inspectors and waste incineration workers. About 54 workers from automobile emission inspection offices, 31 workers from waste incinerating company and 84 unexposed healthy subjects were enrolled in this study. Urine and air samples were collected and analyzed by HPLC and GC/MS. Comet assays were carried out to evaluate any DNA damage in mononuclear and polynuclear cells. A significant difference in Olive tail moments in mononuclear cells was observed between exposed and control subjects (P < 0.0001). To examine the differences of the gene expression profile in automobile emission inspectors and waste incineration workers, radioactive complementary DNA microarrays were used to evaluate changes in the expression of 1,152 total genes. The gene expression profiles showed that 11 genes were up-regulated and 4 genes were down-regulated in waste incinerating workers as compared with controls. Plasma proteins were analyzed by 2-dimentional electrophoresis with pH 3-10 NL IPG Dry strip. The protein expression profiles showed that 8 proteins were up- regulated and 1 protein, haptoglobin, was down- regulated in automobile emission inspectors and waste incineration workers. Serum paraoxonase/ arylesterase was found only in the plasma of waste incineration workers. The expression of genes and proteins involved in oxidative stress were up-regulated in both automobile emission inspectors and waste incineration workers. Several proteins, such as transthyrethin, sarcolectin and haptoglobin, that were highly up- or down-regulated, could serve as biological monitoring markers for future study.     

Tandem time-of-flight mass spectrometer for photodissociation of biopolymer ions generated by matrix-assisted laser desorption ionization (MALDI-TOF-PD-TOF) using a linear-plus-quadratic potential reflectron

A tandem time-of-flight mass spectrometer for the study of photodissociation of biopolymer ions generated by matrix-assisted laser desorption ionization was designed and constructed. A reflectron with linear and quadratic (LPQ) potential components was used. Characteristics of the LPQ reflectron and its utility as the second stage analyzer of the tandem mass spectrometer were investigated. Performance of the instrument was tested by observing photodissociation of [M + H](+) from angiotensin II, a prototype polypeptide. Quality of the photodissociation tandem mass spectrum was almost comparable to that of the post-source decay spectrum. Monoisotopic selection of the parent ion was possible, which was achieved through the ion beam-laser beam synchronization. General theoretical considerations needed for a successful photodissociation of large biopolymer ions are also presented.     

Kinetics and mechanism of benzylamine additions to ethyl alpha-acetyl-beta-phenylacrylates in acetonitrile

Kinetic studies of the addition of benzylamines to a noncyclic dicarbonyl group activated olefin, ethyl alpha-acetyl-beta-phenylacrylate (EAP), in acetonitrile at 25.0 degrees C are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the Calpha-N and Cbeta-H bonds through a four-center hydrogen bonded transition state.The kinetic isotope effects (kH/kD > 1.0) measured with deuterated benzylamines (XC6H4CH2ND2) increase with a stronger electron acceptor substituent (deltasigmaX > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4), but is in contrast to those for other (noncarbonyl) group activated series (5-9). For the dicarbonyl series, the reactivity-selectivity principle (RSP) holds, but for others the anti-RSP applies. These are interpreted to indicate an insignificant imbalance for the former, but substantial lag in the resonance delocalization in the transition state for the latter series.     

Hollow Polydimethylsiloxane Beads with a Porous Structure for Cell Encapsulation

Based on a water‐in‐oil‐in‐water emulsion system, porous and hollow polydimethylsiloxane (PDMS) beads containing cells using a simple fluidic device with three flow channels are fabricated. Poly(ethylene glycol) (PEG) in the PDMS oil phase is served as a porogen for pore development. The feasibility of the porous PDMS beads prepared with different PEG concentrations (10, 20, and 30 wt%) for cell encapsulation in terms of pore size, protein diffusion, and cell proliferation inside the PDMS beads is evaluated. The PDMS beads prepared with PEG 30 wt% are exhibited a highly porous structure and facilitated fast diffusion of protein from the core domain to the outer phase, eventually leading to enhanced cell proliferation. The results clearly indicate that hollow PDMS beads with a porous structure could provide a favorable microenvironment for cell survival due to the large porous structure.