An experimental study on an oscillating loop heat pipe consisting of three interconnected columns

This paper presents some experimental results of an extensive research on a novel oscillating heat pipe. The heat pipe is formed of three interconnected columns as different from the pulsating heat pipe designs. The dimensions of the heat pipe considered in this study are large enough to neglect the effect of capillary forces. Thus, the self-oscillation of the system is driven by the gravitational force and the phase lag between the evaporation and condensation processes. The overall heat transfer coefficient is found to be approximately constant irrespective of heat load for the experimental cases considered. The results are also compared with the previously published data by other investigators for water as the working fluid and for the same heat input range. The experimental data for the time variation of the liquid column heights and the vapor pressure are correlated algebraically, convenient for practical uses.     

Chemical profile by LC–MS/MS,GC/MS and antioxidant activities of the essential oils and crude extracts of two Euphorbia species

In this study, it was aimed to investigate the chemical composition and antioxidant activities of two Euphorbia species. The major component of the fatty acid compositions obtained from the petroleum ether extracts was identified as palmitic acid for Euphorbia gaillardotii and Euphorbia macroclada. The main constituents of the essential oils were identified as arachidic acid for E. gaillardotii and tetratetracontane for E. macroclada. Among the 27 studied compounds, hesperidin, rutin, hyperoside and quinic, malic, gallic and tannic acids were found to be the most abundant compounds in the two Euphorbia species. The methanol extracts of E. gaillardotii and E. macroclada showed strong antioxidant activity in all tested methods. Particularly, IC₅₀ values of E. macroclada methanol extract that was the richest in terms of total phenolic-flavonoid contents were found to be lower than α-tocopherol and butylated hydroxytoluene in β-carotene bleaching, 2,2-diphenyl-1-picrylhydrazyl free and ABTS cation radical scavenging methods.     

A far-red emitting probe for unambiguous detection of mobile zinc in acidic vesicles and deep tissue

Imaging mobile zinc in acidic environments remains challenging because most small-molecule optical probes display pH-dependent fluorescence. Here we report a reaction-based sensor that detects mobile zinc unambiguously at low pH. The sensor responds reversibly and with a large dynamic range to exogenously applied Zn²⁺ in lysosomes of HeLa cells, endogenous Zn²⁺ in insulin granules of MIN6 cells, and zinc-rich mossy fiber boutons in hippocampal tissue from mice. This long-wavelength probe is compatible with the green-fluorescent protein, enabling multicolor imaging, and facilitates visualization of mossy fiber boutons at depths of >100 μm, as demonstrated by studies in live tissue employing two-photon microscopy.     

A Ratiometric Fluorescent Probe for Gold and Mercury Ions

A fluorescent probe that displays a ratiometric fluorescence response towards gold and mercury ions has been devised. Emitting at a relatively longer wavelength, the conjugated form of the fluorescent dye transforms in the presence of the gold or mercury ions into a new dye, the molecular structure of which lacks the conjugation and consequently emits at a distinctly shorter wavelength.     

Facile fabrication and characterization of polyimide nanofiber reinforced photocured hybrid electrolyte for Li‐ion batteries

In this study, a novel ion conductive polyimide (PI) nanofiber reinforced photocured hybrid electrolyte has been fabricated. Polyimide fibers were fabricated with the reaction between 4,4′‐oxydianiline (ODA) and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA) followed by electrospinning and thermal imidization methods. Then, PI electrospun fibers were dipped into hybrid resin formulation containing bisphenol A ethoxylate dimethacrylate (BEMA), poly (ethylene glycol) methyl ether methacrylate (PEGMA) and 3‐(methacryloyloxy) propyltrimethoxysilane (MEMO) and then photocured to prepare PI nanofiber reinforced electrolyte membrane. Photocured membranes were soaked into lithium hexafluorophosphate (LiPF₆) before measuring electrochemical stability and ionic conductivity of hybrid polyelectrolyte. The chemical structure and electrochemical performance of the electrolytes were examined by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV) and scanning electron microscopy (SEM) analysis. The incorporation of MEMO into organic matrix effectively increased the modulus from 2.83 to 5.91 MPa. The obtained results showed that a suitable electrolyte for Li‐ion batteries with high lithium uptake ratio, high conductivity (7.2 × 10^?3 S cm^?1) at ambient temperature and wide stability window above 5.5 V had been prepared. Copyright © 2017 John Wiley & Sons, Ltd.     

Heat capacity measurements on BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript> and derivation of its thermodynamic functions

Heat capacity measurements of barium tantalate (BaTa₂O₆) were carried out by using a differential scanning calorimeter at temperatures between 323 and 1323 K. From the heat capacity values of BaTa₂O₆, other thermodynamic functions (enthalpy and entropy increments) were derived between 298.15 and 1323 K. The C _p,m (298.15) value of BaTa₂O₆ was computed as 184.857 J mol^?1 K^?1. Moreover, fitted heat capacities exhibited good agreement with Neumann–Kopp rule at the temperatures between 298.15 and 1300 K.     

Statistical and Geometrical Way of Model Selection for a Family of Subdivision Schemes

The objective of this article is to introduce a generalized algorithm to produce the m-point n-ary approximating subdivision schemes(for any integer m, n ≥ 2). The proposed algorithm has been derived from uniform B-spline blending functions. In particular, we study statistical and geometrical/traditional methods for the model selection and assessment for selecting a subdivision curve from the proposed family of schemes to model noisy and noisy free data. Moreover, we also discuss the deviation of subdivision curves generated by proposed family of schemes from convex polygonal curve. Furthermore, visual performances of the schemes have been presented to compare numerically the Gibbs oscillations with the existing family of schemes.