Microstructural properties and local atomic structures of cobalt oxide nanoparticles synthesised by mechanical ball-milling process

In this study, facile preparation of pure and nano-sized cobalt oxides particles was achieved using low-cost mechanical ball-milling synthesis route. Microstructural and morphological properties of synthesised products were characterised by X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. XRD results indicated that the fabricated samples composed of cubic pure phase CoO and Co₃O₄ nanocrystalline particles with an average crystallite size of 37.2 and 31.8 nm, respectively. TEM images showed that the resulting samples consisted of agglomerates of particles with average diameter of about 37.6 nm for CoO and 31.9 nm for Co₃O₄. Phase purity of the prepared samples was further investigated due to their promising technological applications. Local atomic structure properties of the prepared nanoparticles were probed using synchrotron radiation-based X-ray absorption spectroscopy (XAS) including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). EXAFS data analysis further confirmed the formation of single-phase CoO and Co₃O₄ nanoparticles. In addition, structural properties of cobalt oxide nanoparticles were investigated by performing density functional theory calculations at B3LYP/TZVP level and Born–Oppenheimer molecular dynamics. Theoretical calculations for both prepared samples were found to be consistent with the experimental results derived from EXAFS analysis. Obtained results herein reveals that highly crystalline and pure phase CoO and Co₃O₄ nanoparticles can be synthesised using simple, inexpensive and eco-friendly ball-milling method for renewable energy applications involving fuel cells and water splitting devices.     

Multi‐crystalline silicon solar cells with metal‐assisted nano‐texturing using HNO3 as hole injection agent

In this study, metal‐assisted etching (MAE) with nitric acid (HNO₃) as a hole injecting agent has been employed to texture multi‐crystalline silicon wafers. It was previously proven that addition of HNO₃ enabled control of surface texturing so as to form nano‐cone shaped structures rather than nanowires. The process parameters optimized for optically efficient texturing have been applied to multi‐crystalline wafers. Fabrication of p‐type Al:BSF cells have been carried out on textured samples with thermal SiO₂/PECVD‐SiN_x stack passivation and screen printed metallization. Firing process has been optimized in order to obtain the best contact formation. Finally, j_sc enhancement of 0.9 mA/cm² and 0.6% absolute increase in the efficiency have been achieved. This proves that the optimized MAE texture process can be successfully used in multi‐crystalline wafer texturing with standard passivation methods.

J –V curves and SEM images of the nano and iso‐textured samples. j_sc enhancement of 0.9 mA/cm² together with 0.6% absolute efficiency gain was observed on nano‐textured samples.     

Synthesis of carrageenan coated silver nanoparticles by an easy green method and their characterization and antimicrobial activities

The aim of the present work was to synthesize carrageenan coated silver nanoparticles (CA–AgNPs) using carrageenan as reducing and stabilizing agent. For this purpose, 10 mL of 0.35% (w/v) carrageenan solution was mixed with 10 mL AgNO₃ solution at different concentrations (1, 5 and 10 mM), and the resulting mixture was stirred at 100 °C at high speed for 2 h. The formation of CA–AgNPs was proven with the surface plasmon peaks observed at approximately 420 nm. The sizes and zeta potentials of CA–AgNPs were determined by Zeta-Sizer. Negative zeta potentials of CA–AgNPs indicated that the obtained AgNPs were stable. With scanning electron microscope (SEM) and transmission electron microscope analysis, it was seen that CA–AgNPs have spherical structure. According to the energy dispersion spectrometer analysis based on SEM images, it was observed that the samples were elementally composed of carbon, oxygen, sulfur, potassium and silver. The chemical structures of CA–AgNPs were determined by Fourier transform infrared spectroscopy, and it was proved that the carbonyl and OH groups of carrageenan were involved in formation and stabilizing of AgNPs, respectively. According to thermal gravimetric analysis, it has been observed that CA–AgNPs were thermally more stable than pure carrageenan. Antibacterial activity of CA–AgNPs against gram-positive and gram-negative bacteria was investigated with agar well diffusion and liquid test. It has been observed that CA–AgNPs synthesized with 1 mM AgNO₃ did not have an antibacterial activity on Escherichia coli and Staphylococcus aureus. Inhibition zones of varying diameters were observed in the 5 mM and 10 mM S-AgNPs groups. The synthesized CA–AgNPs (5 and 10 mM) have the capacity to be used in wound dressing materials or topical agents applied to burns and wounds due to their antibacterial effects and stability.

     

Electrochemical preparation of α-Ni(OH)2 ultrafine nanoparticles for high-performance supercapacitors

Well-dispersed nanoparticles of nickel hydroxide were prepared via a simple electrochemical method. Electrodeposition experiments were performed from 0.005 M Ni(NO₃)₂ bath at a constant current density of 0.1 mA cm^?2 on the steel cathode for 1 h. Recording the potential values during the deposition process revealed that the reduction of water has major role in the base electrogeneration at the applied conditions. The obtained deposit was characterized by the X-ray diffraction (XRD), infrared (IR), differential scanning calorimeter–thermogravimetric analysis, carbon–nitrogen–hydrogen (CHN), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The CHN, XRD, and IR analyses showed that the obtained deposit has α phase of Ni(OH)₂ with intercalated nitrate ions in its structure. Morphological characterization by SEM and TEM revealed that the prepared α-Ni(OH)₂ is composed of well-dispersed ultrafine particles with the size of about 5 nm. The supercapacitive performance of the prepared nanoparticles was analyzed by means of cyclic voltammetry and galvanostatic charge–discharge tests. The electrochemical measurements showed an excellent supercapacitive behavior of the prepared α-Ni(OH)₂ nanoparticles. It was also observed that the α-Ni(OH)₂ ultrafine particles have better electrochemical characteristic and supercapacitive behavior than β-Ni(OH)₂ ultrafine nanoparticles, including less positive charging potential, lower E _a???E _c value, better reversibility, higher E _OER???E _a, higher utilization of active material, higher proton diffusion coefficient, greater discharge capacity, and better cyclability. These results make the α-Ni(OH)₂ nanoparticles as an excellent candidate for the supercapacitor materials.     

Robust Inclusion Complexes of Crown Ether Fused Tetrathiafulvalenes with Li+@C60 to Afford Efficient Photodriven Charge Separation

Inclusion complexes of benzo‐ and dithiabenzo‐crown ether functionalized monopyrrolotetrathiafulvalene (MPTTF) molecules were formed with Li⁺@C₆₀ ( 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀). The strong complexation has been quantified by high binding constants that exceed 10⁶ M ^?1 obtained by UV/Vis titrations in benzonitrile (PhCN) at room temperature. On the basis of DFT studies at the B3LYP/6‐311G(d,p) level, the orbital interactions between the crown ether moieties and the π surface of the fullerene together with the endohedral Li⁺ have a crucial role in robust complex formation. Interestingly, complexation of Li⁺@C₆₀ with crown ethers accelerates the intersystem crossing upon photoexcitation of the complex, thereby yielding ³(Li⁺@C₆₀)*, when no charge separation by means of ¹Li⁺@C₆₀* occurs. Photoinduced charge separation by means of ³Li⁺@C₆₀* with lifetimes of 135 and 120 μs for 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀, respectively, and quantum yields of 0.82 in PhCN have been observed by utilizing time‐resolved transient absorption spectroscopy and then confirmed by electron paramagnetic resonance measurements at 4 K. The difference in crown ether structures affects the binding constant and the rates of photoinduced electron‐transfer events in the corresponding complex.     

Electrochemical investigation of a schiff base synthesized by cinnamaldehyde as corrosion inhibitor on mild steel in acidic medium

The inhibiting effect of (NE)-4-phenoxy-N-(3-phenylallylidene) aniline (PAC) on the corrosion of mild steel in 1.0 M HCl has been studied by electrochemical impedance spectroscopy, and Tafel polarization measurements. The corrosion rate was also calculated theoretically in terms of mm per year and mil per year, using current density values of mild steel in 1.0 M HCl medium. It was found that PAC has a remarkable inhibition efficiency on the corrosion of mild steel especially at high temperatures. The values of E _a obtained in presence of a Schiff base were found to be lower than those obtained in the inhibitor-free solution. The increase of inhibition efficiency percent with temperature increase was associated with the transformation of physical adsorption into chemical adsorption. The thermodynamic functions of adsorption processes have been evaluated and discussed at each temperature. Scanning electron microscope observations of the electrode surface confirmed the existence of a protective adsorbed film of the inhibitor on the electrode surface.     

Synthesis and biological evaluation of some heterocyclic scaffolds based on the multifunctional N-(4-acetylphenyl)-2-chloroacetamide

The chloroacetamide derivative, 1 , was used as a versatile precursor for the synthesis of various types of N-aryl-2-(benzothiazol-2-ylthio)acetamide derivatives. The reaction of 1 with 2-mercaptobenzothiazole followed by condensation reaction of the produced sulfide with phenylhydrazine, 2-cyanoacetohydrazide, and/or thiosemicarbazide furnished the conforming condensation products, 4 , 7 , and 10 , respectively. Treatment of the phenylhydrazone product, 4 , with Vilsmeier formylation reagent (POCl₃/DMF) yielded the corresponding 4-formylpyrazole derivative, 5 . The thiosemicarbazone product, 10 , was reacted with ethyl bromoacetate to furnish the thiazolin-4-one derivative, 11 . The substitution reactions of chloroacetamide derivative, 1 , with 2-mercapto-4,6-dimethylnicotinonitrile and 6-amino-2-mercaptopyrimidin-4-ol, were explored to identify the sulfide products, 14 and 17 . Cyclization of 14 into its corresponding thieno[2,3-b]pyridine compound, 15 , was performed using sodium ethoxide. The thiosemicarbazone, 10 , and sulfide derivative, 14 , were found to be the most potent antibacterial compounds against Escherichia coli and Staphylococcus aureus, exhibiting growth inhibitory activities of 80.8% and 91.7%, respectively. Moreover, the thiosemicarbazone, 10 , displayed the most significant antioxidant activity with inhibitory activity of 82.6%, which comes close to the antioxidant activity of L-ascorbic acid.     

Thermal dry reforming of methane over La2O3 co-supported Ni/MgAl2O4 catalyst for hydrogen-rich syngas production

Research on Chemical Intermediates - The excess emission of greenhouse gases (GHGs) such as CO2 and CH4 is posing an acute threat to the environment, and efficient ways are being sought to utilize...     

Biosynthesis of silver nanoparticles using Onosma sericeum Willd. and evaluation of their catalytic properties and antibacterial and cytotoxic activity

In this study, silver nanoparticle (AgNP) synthesis was carried out using Onosma sericeum Willd. aqueous extract for the first time, with a simple, economical, and green method without the need for any other organic solvent or external reducing or stabilizing agent. A variety of AgNPs, all of different particle sizes, were synthesized by controlling the silver ion concentration, extract volume, temperature, and pH. It was determined that the optimum conditions for AgNP synthesis were 1 mM AgNO3, pH 8, 25 °C, 20 g/200 mL extract, silver nitrate, and extract ratio 5:1 (v/v). The AgNPs were defined using UV-Vis spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDAX), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The particle size distribution and zeta potential measurements of the AgNPs were measured using the dynamic light scattering (DLS) technique. It was determined that the AgNPs with a particle size of less than 10 nm showed a higher catalytic effect in the reduction of 2-nitrobenzenamine. It was also found that these nanoparticles had a cytotoxic effect on the MCF-7 breast cancer cell line depending on dosage and time. The resulting IC50 values were between 76.63 µg/mL and 169.77 µg/mL. Furthermore, the biosynthesized AgNPs showed effective antibacterial activity against the Acinetobacter baumannii bacteria. The results of the study showed that synthesized AgNPs can have a promising role in biomedical and nanobiotechnology applications.     

Comprehensive Review on Application of FTIR Spectroscopy Coupled with Chemometrics for Authentication Analysis of Fats and Oils in the Food Products

Currently, the authentication analysis of edible fats and oils is an emerging issue not only by producers but also by food industries, regulators, and consumers. The adulteration of high quality and expensive edible fats and oils as well as food products containing fats and oils with lower ones are typically motivated by economic reasons. Some analytical methods have been used for authentication analysis of food products, but some of them are complex in sampling preparation and involving sophisticated instruments. Therefore, simple and reliable methods are proposed and developed for these authentication purposes. This review highlighted the comprehensive reports on the application of infrared spectroscopy combined with chemometrics for authentication of fats and oils. New findings of this review included (1) FTIR spectroscopy combined with chemometrics, which has been used to authenticate fats and oils; (2) due to as fingerprint analytical tools, FTIR spectra have emerged as the most reported analytical techniques applied for authentication analysis of fats and oils; (3) the use of chemometrics as analytical data treatment is a must to extract the information from FTIR spectra to be understandable data. Next, the combination of FTIR spectroscopy with chemometrics must be proposed, developed, and standardized for authentication and assuring the quality of fats and oils.