Radiochemical separation of99Mo from natural uranium irradiated with thermal neutrons

⁹⁹Mo was separated from uranium and insoluble fission product hydroxides. More than 98% of⁹⁹Mo radioactivity was extracted with bis (2-ethylhexyl)phosphoric acid. The organic phase was washed and⁹⁹Mo was back-extracted from the organic phase with NH₄OH solution. The percent recovery from the organic phase was 91% and the purity of⁹⁹Mo was more than 99%. Pure^99mTc was also extracted from the organic phase with a saline solution. Reversed-phase partition chromatography was used for the purification of⁹⁹Mo from¹³¹I and other fission products (10% HDEHP on kieselguhr bed).¹³¹I and other isotopes were quantitatively eluted with 0.1M H₂SO₄,⁹⁹Mo was eluted using a mixture of 0.5 M HCl and 30% H₂O₂.     

Photocatalytic Activity of Supported Metal Nanoparticles and Single Atoms

Photocatalysis has been known as one of the promising technologies due to its eco-friendly nature. However, the potential application of many photocatalysts is limited owing to their large bandgaps and inefficient use of the solar spectrum. One strategy to overcome this problem is to combine the advantages of heteroatom-containing supports with active metal centers to accurately adjust the structural parameters. Metal nanoparticles (MNPs) and single atom catalysts (SACs) are excellent candidates due to their distinctive coordination environment which enhances photocatalytic activity. Metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and carbon nitride (g-C₃N₄) have shown great potential as catalyst support for SACs and MNPs. The numerous combinations of organic linkers with various heteroatoms and metal ions provide unique structural characteristics to achieve advanced materials. This review describes the recent advancement of the modified MOFs, COFs and g-C₃N₄ with SACs and NPs for enhanced photocatalytic applications with emphasis on environmental remediation.     

Syntheses of 1-substituted 1,2,4-triazoles,imidazoles and benzimidazoles

Substituted 2-phenethyl-1,2,4-triazoles, 1-phenethylimidazoles 3 and 1-phenethylbenzimidazoles 5 were synthesized from the reaction of compound 8 with tri-n-butyltin hydride in good yield. The reaction of substituted-2-phenethyl halide with 1H-1,2,4-triazoles, imidazoles and benzimidazoles gave a low yield. The yield was increased by the use of substituted-2-phenethyl p-toluensulfonate.     

Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment.     

Characterization of aerogel prepared high-surface-area alumina: in situ FTIR study of dehydroxylation and pyridine adsorption

Mesoporous high-surface-area alumina was prepared by a modified aerogel procedure. Specific surface areas between 530-685 m(2)g(-1) were obtained after heat treatment at 500 degrees C. Nitrogen adsorption studies have shown that surface areas and pore characteristics change upon decomposition of aluminum hydroxide to oxide as well as upon compaction of oxide powders. The surface area of aluminum hydroxide increased to a maximum, while the pore volume and diameter decreased as the hydroxide was heated to a temperature of 400 degrees C. Heating at higher temperatures resulted in sintering of the particles accompanied by a decline in the surface area. Compaction of activated alumina into pellets was accompanied by a relatively gradual change in the surface area and pore characteristics at pressures below 6.9 x 10(7) Pa, while severe changes took place at a pressure of 1.4 x 10(8) Pa. In situ IR studies of the dehydroxylation of the alumina surface, showed nu(OH) absorptions for isolated surface hydroxy groups centering at 3670, 3714, and 3765 cm(-1), which are shifted to lower frequencies than common literature values. Pyridine was found to adsorb on Al(3+) ions as well as through hydrogen bonding to relatively acidic surface OH groups, and IR spectra indicated the presence of strong Lewis acid sites.     

Synthesis, experimental and theoretical characterization of N,N'-dipyridoxyl (1,4-butanediamine) Schiff-base ligand and its Cu(II) complex

A new N,N'-dipyridoxyl(1,4-butanediamine) [=H(2)BS] Schiff-base ligand and its Cu(II) salen complex, [Cu(BS)(H(2)O)(CH(3)OH)], were synthesized and characterized by IR, UV-vis, (1)H NMR, mass spectrometry and elemental analysis. Also, full optimization of the geometries, (1)H NMR chemical shifts (for the H(2)BS) and vibrational frequencies were calculated by using density functional theory (DFT) method. Structure of the H(2)BS ligand is not planar, i.e. two pyridine rings are not in the same plane. In the structure of the Cu complex, the Schiff-base ligand acts as a dianionic tetradentate ligand in N, N, O(-), O(-) manner. The coordinating atoms of BS(2-) occupy equatorial positions of the octahedral complex, where the H(2)O and CH(3)OH ligands locate at axial positions. The calculated results are in good agreement with the experimental data, confirming the suitability of the proposed and optimized structures for the H(2)BS ligand and its Cu complex.     

Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements

Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.     

Ion pairing, H-bonding, and π–π interactions in copper(II) complex-organo-networks derived from a proton-transfer compound of the 1,10-phenanthroline-2,9-dicarboxylic acid

The one-pot reaction between the novel proton transfer compound (pydaH₂)²⁺(phendc)²⁻, LH₂, and Cu(II) afforded the compounds (pydaH)₂[Cu(phendc)₂]·10H₂O, 1, and (pydaH)₂[Cu(phendc)(phendcH)]₂·5H₂O, 2, where pyda=2,6-diaminopyridine, and phendcH₂=1,10-phenanthroline-2,9-dicarboxylic acid. The single crystal X-ray diffraction analysis of 1 and 2 revealed that these are two novel self-assembled 3D Cu(II) complex-organo-networks, in which (pydaH)⁺ ions and [Cu(phendc)₂]²⁻ or complex units are held together by ion pairing, H-bonding, and π–π interactions. Magnetic measurements over the temperature range 1.8–310 K revealed no significant magnetic coupling between Cu(II) centers in 1 or 2.     

Microbial transformation of prednisone

The microbial transformation of prednisone (17alpha,21-dihydroxy-pregna-1,4-diene-3,11,20-trione) (1) by Cunninghamella elegans afforded two metabolites, 17alpha,21-dihydroxy-5alpha-pregn-1-ene-3,11,20-trione (2) and 17alpha,20S,21-trihydroxy-5alpha-pregn-1-ene-3,11-dione (3), while the fermentation of 1 with Fusarium lini, Rhizopus stolonifer and Curvularia lunata afforded a metabolite 1,4-pregnadiene-17alpha,20S,21-triol-3,11-dione (4). Compound 3 was found to be a new metabolite. Their structures were elucidated on the basis of spectroscopic techniques. Compound 3 showed inhibitory activity against lipoxygenase enzyme.