Electro-deposition of gold nanostructures on carbon paste electrode: a platform with signal amplification for voltammetric study and determination of pyridoxine (vitamin B<Subscript>6</Subscript>)

For the first time, the electrochemical synthesis of gold nanostructures was done at the surface of carbon paste electrode. This device was used as a simple and sensitive electrochemical sensor for measurement of pyridoxine (Vitamin B₆, VB₆). The diffusion coefficient (D) and the kinetic parameters such as electron transfer coefficient (α) and catalytic rate constant (k) for VB₆ were also determined using electrochemical approaches. The cyclic voltammetry method showed VB₆ oxidation reaction with irreversible characteristics was diffusion-controlled at low scan rates. Using differential pulse voltammetry (DPV), the peak current was linearly dependent on VB₆ concentration in the ranges of 1.9–110.8 and 110.8–257.0 μM, with detection limit of 74.0 nM, respectively. Results showed there is no interference of other vitamins in oxidation of VB₆. DPV was used to quantify of VB₆ in some real samples by the standard addition method. The modified electrode showed good sensitivity and stability.     

Study of inclusion complex formation between a cationic surfactant, two cyclodextrins and a drug

In this study inclusion of hexadecyltrimethylammonium bromide (HTAB) with α-, and β-cyclodextrin (CD) in the presence and the absence of bromhexine (BH) was investigated using ion-selective electrode method. The association constants of HTAB with CDs were determined by potentiometry and were close to literature values. The obtained results indicated that α-CD formed 1:1 and 1:2 inclusion complexes, but β-CD formed only a 1:1 inclusion complex. In the presence of drug, the interaction between CDs and HTAB decreased, because both drug and HTAB could interact with CDs. The results showed that the interaction between drug and CDs are greater than HTAB and CDs. The stoichiometry of the inclusion complexes, the critical aggregation concentration (CAC), the monomer surfactant concentration of HTAB, [HTAB]_f, and also the effect of the inclusion complex on the micellization process of the HTAB were determined by conductivity measurements.     

Error reduction for higher derivatives of Chebyshev collocation method using preconditioning and domain decomposition

A new preconditioning method is investigated to reduce the roundoff error in computing derivatives using Chebyshev collocation methods(CCM). Using this preconditioning causes ratio of roundoff error of preconditioning method and CCM becomes small when N gets large. Also for accuracy enhancement of differentiation we use a domain decomposition approach. Error analysis shows that for this domain decomposition method error reduces proportional to the length of subintervals. Numerical results show that using domain decomposition and preconditioning simultaneously, gives super accurate approximate values for first derivative of the function and good approximate values for moderately high derivatives.     

Selective extraction and analysis of pioglitazone in cow plasma using a molecularly imprinted polymer combined with ESI ion mobility spectrometry

A method based on ESI ion mobility spectrometry as a detection technique after treatment with a molecularly imprinted polymer is described for the analysis of pioglitazone. In addition to the molecularly imprinted polymer separation methodology, the positive ion mobility spectrum and the reduced mobility values for pioglitazone are reported for the first time. The method was exhaustively validated in terms of sensitivity, imprinting factor, enrichment factor, and sorption capacity. A linear dynamic range of 0.10–20.00 μg/mL and an RSD below 6% were obtained for the analysis of this compound. The average recovery for the analysis of spiked samples was calculated to be about 91%. The method was also used to determine pioglitazone in cow plasma, and the results were compared with those obtained using HPLC. The satisfactory results evidence a convenient method for the analysis of the target compound in real samples without using any additional derivatization methods.     

Spectroscopic,Thermal, and Structural Studies of Two New Co‐Crystals of [4,4′‐Bithiazole]‐2,2′‐diamine

Two new 2 : 1 co‐crystals based on [4,4′‐bithiazole]‐2,2′‐diamine (=2,2′‐diamino‐4,4′‐bithiazole (DABTZ)) with 2,2′‐bipyridine (bipy) and benzo‐18‐crown‐6 (bk) were synthesized by slow‐evaporation method in MeOH. These co‐crystals were characterized by means of elemental analysis, and IR, and ¹H‐ and ¹³C‐NMR spectroscopy. Also, thermal analyses under air atmosphere and X‐ray crystallography have been performed on these structures. X‐Ray single‐crystal analyses revealed that these networks contain large vacant voids. These structures, [(DABTZ)₂(bipy)] and [(DABTZ)₂(bk)(MeOH)], crystallized in monoclinic and triclinic forms with space groups of P2₁/c and P , respectively. The self‐assembly of these compounds in the solid state is likely caused by both H‐bonding and π? π stacking.     

Enhanced Supercapacitor Performance Using a Co3O4@Co3S4 Nanocomposite on Reduced Graphene Oxide/Ni Foam Electrodes

To avoid an enormous energy crisis in the not-too-distant future, it be emergent to establish high-performance energy storage devices such as supercapacitors. For this purpose, a three-dimensional (3D) heterostructure of Co₃O₄ and Co₃S₄ on nickel foam (NF) that is covered by reduced graphene oxide (rGO) has been prepared by following a facile multistep method. At first, rGO nanosheets are deposited on NF under mild hydrothermal conditions to increase the surface area. Subsequently, nanowalls of cobalt oxide are electro-deposited on rGO/Ni foam by applying cyclic-voltammetry (CV) under optimized conditions. Finally, for the synthesis of Co₃O₄@Co₃S₄ nanocomposite, the nanostructure of Co₃S₄ was fabricated from Co₃O₄ nanowalls on rGO/NF by following an ordinary hydrothermal process through the sulfurization for the electrochemical application. The samples are characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The obtained sample delivers a high capacitance of 13.34 F cm⁻² (5651.24 F g⁻¹) at a current density of 6 mA cm⁻² compared to the Co₃O₄/rGO/NF electrode with a capacitance of 3.06 F cm⁻² (1230.77 F g⁻¹) at the same current density. The proposed electrode illustrates the superior electrochemical performance such as excellent specific energy density of 85.68 W h Kg⁻¹, specific power density of 6048.03 W kg⁻¹ and a superior cycling performance (86% after 1000 charge/discharge cycles at a scan rate of 5 mV s⁻¹). Finally, by using Co₃O₄ @Co₃S₄/rGO/NF and the activated carbon-based electrode as positive and negative electrodes, respectively, an asymmetric supercapacitor (ASC) device was assembled. The fabricated ASC provides an appropriate specific capacitance of 79.15 mF cm⁻² at the applied current density of 1 mA cm⁻², and delivered an energy density of 0.143 Wh kg⁻¹ at the power density of 5.42 W kg⁻¹.     

Electrochemical methods for simultaneous determination of trace amounts of dopamine and uric acid using a carbon paste electrode incorporated with multi-wall carbon nanotubes and modified with α-cyclodextrine

In this work, we investigate the electrochemical activity of dopamine (DA) and uric acid (UA) using both a bare and a modified carbon paste electrode as the working electrode, with a platinum wire as the counter electrode and a silver/silver chloride (Ag/AgCl) as the reference electrode. The modified carbon paste electrode consists of multi-walled carbon nanotubes (>95%) treated with α-cyclodextrine, resulting in an electrode that exhibits a significant catalytic effect toward the electro-chemical oxidation of DA in a 0.2-M Britton–Robinson buffer solution (pH 5.0). The peak current increases linearly with the DA concentration within the molar concentration ranges of 2.0 × 10⁻⁶ to 5.0 × 10⁻⁵ M and 5.0 × 10⁻⁵ to 1.9 × 10⁻⁴ M. The detection limit (signal to noise >3) for DA was found to be 1.34 × 10⁻⁷ M, respectively. In this work, voltammetric methods such as cyclic voltammetry, chronoamperometry, chronocuolometry, differential pulse and square wave voltammetry, and linear sweep and hydrodynamic voltammetry were used. Cyclic voltammetry was used to investigate the redox properties of the modified electrode at various scan rates. The diffusion coefficient (D, cm² s⁻¹ = 3.05 × 10⁻⁵) and the kinetic parameters such as the electron transfer coefficient (α = 0.51) and the rate constant (k, cm³ mol⁻¹ s⁻¹ = 1.8 × 10³) for DA were determined using electrochemical approaches. By using differential pulse voltammetry for simultaneous measurements, we obtained two peaks for DA and UA in the same solution, with the peak separation approximately 136 mV. The average recovery was measured at 102.45% for DA injection.     

Transform-Limited Pulses Are Not Optimal for Resonant Multiphoton Transitions

Maximizing nonlinear light-matter interactions is a primary motive for compressing laser pulses to achieve ultrashort transform limited pulses. Here we show how, by appropriately shaping the pulses, resonant multiphoton transitions can be enhanced significantly beyond the level achieved by maximizing the pulse's peak intensity. We demonstrate the counterintuitive nature of this effect with an experiment in a resonant two-photon absorption, in which, by selectively removing certain spectral bands, the peak intensity of the pulse is reduced by a factor of 40, yet the absorption rate is doubled. Furthermore, by suitably designing the spectral phase of the pulse, we increase the absorption rate by a factor of 7.