Electrochemical and mechanical characteristics of Al-(x)SiC composite fabricated by high energy compaction

Simultaneous compaction and sintering using the energy generated by the underwater explosion is a rapid method that does not have the negative consequences of normal sintering, such as unwanted reactions between components and grain growth. For this reason, this study used the energy from this process to produce Al/SiC composites with different amounts of SiC. As a result, 10, 20, and 30% of SiC powder were added to the Al powder, and then the samples were produced by compression under the influence of an underwater explosion. The results showed that as the amount of SiC increased, the samples' density and the amount of porosity for further agglomeration increased. Microstructural examination by Scanning Electron Microscopy (SEM) confirmed the increase in agglomeration with increasing SiC. Besides, Samples experienced an increase in hardness as the amount of SiC raised. Adding 10% of SiC increased the flexural strength while adding more (20 and 30%) increased the agglomeration resulting in a decrease in strength and elongation. Polarization and impedance spectroscopy (EIS) methods were used to study the samples' electrochemical behavior in a 3.5% NaCl solution. Results showed that the addition of SiC particles up to 10% (wt%) reduces the corrosion density from 9.7 (μA/cm²) to 2.06 (μA/cm²). The Al–10%SiC composite had the lowest corrosion current density compared to 20% and 30% SiC composites. In addition, the polarization resistance of the Nyquist plot for pure Al and Al composite containing 10% SiC was 3965 and 7862, respectively. Therefore, these results showed the beneficial effect of 10% SiC as reinforcing particles on the corrosion behavior of Al composites and thus improved corrosion resistance.     

Efficient access to novel tetra- and pentacyclic dihydroquinolin-2-ones by catalyst-free domino Knöevenagel hetero-Diels–Alder reactions from <Emphasis Type="Italic">N</Emphasis>-(2-formylphenyl)-<Emphasis Type="Italic">N</Emphasis>-methylcinnamamides and cyclic 1,3-dicarbonyls in water

An efficient catalyst-free synthesis of novel annulated hybrid derivatives of two known scaffolds, dihydroquinolinone and pyranopyranone, pyranopyrimidinedione, pyranocoumarin or chromenone is described. N-(2-Formylphenyl)-N-methylcinnamamides underwent a one-pot domino Knöevenagel hetero-Diels–Alder reaction with dimedone, N,N-dimethylbarbituric acid, 1,3-indanedione, 4-hydroxycoumarins and 4-hydroxy-6-methyl-2H-pyran-2-one in water, affording the desired tetra and pentacyclic pyranoquinolinones in excellent yields.     

Hyperfine coupling in methyl radical isotopomers

The hyperfine coupling constants (hfcs) of two methyl radical isotopomers, CH2Mu and CD2Mu, have been measured over a wide range of temperature in ketene and ketene-d2, from which the radicals were generated. The magnitudes of the hfcs of these muoniated methyl radical isotopomers are larger than those of CH3 and CD3 due to larger zero-point energy in the out-of-plane bending mode. In contrast to CH3 and CD3, where the coupling constants become smaller with increasing temperature, the negative hfcs of the muoniated radicals were found to increase in magnitude (become more negative) with temperature, passing through a maximum near the boiling point of ketene. This behavior is attributed to a solvent-induced change in the force constant of the out-of-plane bending mode. The opposite temperature effect known for CH3 and CD3 is explained by excitation of the low frequency out-of-plane bending mode. This effect is much smaller in the muoniated radicals, where the vibrational frequency is significantly higher due to the light mass of muonium; consequently, the solvent effect dominates at low temperatures.     

Fe3O4@SiO2‐copper sucrose xanthate as a green nanocatalyst for N‐, O‐ and S‐arylation

Formation of C(sp²)–X bonds was carried out using a Fe₃O₄@SiO₂‐copper(I) sucrose xanthate nanoparticle catalyst with the aid of the copper(I) xanthate moiety in the catalyst which was prepared from the reaction between sucrose and carbon disulfide through an alkaline medium via the traditional Zeise approach. Various techniques were employed for the characterization of these novel nanoparticles. Three sorts of heteroatoms, N, O and S, successfully underwent heteroatom arylation to produce secondary or tertiary amines, ethers and thioethers, respectively.     

A unique combination of KI/ZnFe2O4 as a catalyst for oxidative Strecker reaction

α‐Aminonitriles as key intermediates for the preparation of α‐amino acid derivatives, amides, diamines, peptides, proteins and heterocycles were synthesized through methylarene oxidation in the Strecker reaction using a unique combination of KI/ZnFe₂O₄ as the best catalyst and aqueous tert‐butyl hydroperoxide as oxidant. A wide range of amines and methylarenes were converted to the corresponding products. Operational simplicity, short reaction time and recyclability of the catalyst are advantages of this protocol.     

Novel tuneable optical elements based on nanoparticle suspensions in microfluidics

This work demonstrates the application of dielectrophoretic (DEP) control of silica nanoparticles to form tuneable optical elements within a microfluidic system. The implementation consisted of a microfluidic channel with an array of curved microelectrodes along its base. Various DEP conditions were investigated at alternating current voltage amplitudes, flow rates and frequencies from 5 to 15 V, 2 to 10 μL/min and 0 to 20 MHz, respectively. The fluid channel was filled with deionized water suspending silica particles with diameters of 230 and 450 nm. Experiments were conducted to demonstrate DEP concentration and deflection of the particles and the impact of these particles distributions on the optical transmission through the fluid channel. Both confinement and scattering of the light were observed depending on the particle dimensions and the parameters of the DEP excitation. The results of this investigation illustrate the feasibility of DEP control in an optofluidic system and represent a significant step toward the dynamic formation of electrically controlled liquid optical waveguides.     

Synthesis of novel tricyclic and tetracyclic sultone scaffolds via intramolecular 1,3-dipolar cycloaddition reactions

The initially prepared 2-formylphenyl-(E)-2-phenylethenesulfonates from the condensation of (E)-2-phenylethenesulfonyl chloride with 2-hydroxybenzaldehyde derivatives underwent intramolecular [3+2] cycloaddition with methyl or phenylhydroxylamine, sarcosine, and l-proline, affording the corresponding novel isoxazolidine, pyrrolidine and pyrrolizidine-annulated γ,δ-benzo-δ-sultones, respectively, in good yields. Unambiguous assignment of the molecular structures was carried out by single-crystal X-ray diffraction.     

Palladium‐catalysed reductive carbonylation of aryl halides with iron pentacarbonyl for synthesis of aromatic aldehydes and deuterated aldehydes

The first use of iron pentacarbonyl is described for the novel and efficient conversion of aryl iodides, bromides and chlorides into their corresponding aryl aldehydes and/or aryl deuterated aldehydes. The reaction is catalysed with Pd(0) in aqueous N,N‐dimethylformamide at atmospheric pressure. In this protocol, neither gaseous hydrogen nor any reducing agent is required for the formation of the carbonylated product. The reaction can be performed without a P(III) ligand for aryl iodides; however, employing a P(III) ligand is necessary to perform the reaction with aryl bromides and chlorides. Copyright © 2015 John Wiley & Sons, Ltd.     

BF3‐grafted Fe3O4@Sucrose nanoparticles as a highly‐efficient acid catalyst for syntheses of Dihydroquinazolinones (DHQZs) and Bis 3‐Indolyl Methanes (BIMs)

Current paper represents immobilization of sucrose on the Fe₃O₄ core and grafting of boron trifluoride (BF₃) onto the new surface. The catalytic activity of these nanoparticles was tested in syntheses of Dihydroquinazolinones (DHQZs) and Bis (3‐Indolyl) Methanes (BIMs) as two fruitful pharmaceutical structures. Acidic capacity, FT‐IR, XRD, VSM, TGA and SEM–EDX tests are carried out on such novel nanoparticles (NPs). Catalyst has shown more acidic capacity per one gram of NPs than sulfonated homologue which was reported previously.     

A three-component,intramolecular Ugi reaction toward unique indoloketopiperazines

2-(3-Chloro-2-formyl-1H-indol-1-yl) acetic acid, as a bifunctional formyl-acid, is prepared in three steps. This compound undergoes a one-pot, four-center, three-component Ugi reaction with primary amines and alkyl isocyanides. A series of novel substituted indoloketopiperazine derivatives are obtained in moderate to high yields.