Plasma Characteristics of a Ni–Zn Ferrite Enhanced Internal-Type Inductively Coupled Plasma Source Operated at 2 and 13.56 MHz

Plasma and electrical characteristics of an internal-type inductively coupled plasma source with a Ni–Zn ferrite module installed near the antenna were investigated for different rf power frequencies of 2 and 13.56 MHz. Due to the lower heating of the Ni–Zn ferrite module on the antenna for the operation at 2 MHz compared to the operation at 13.56 MHz, higher plasma density and lower rf rms antenna voltage were resulted for the operation at 2 MHz in addition to more stable plasma characteristics. By the application of 500 W of rf power to the source, a high plasma density of 8 × 10¹¹ cm⁻³ which is about four times higher than that with 13.56 MHz could be obtained at the pressure of 10 mTorr Ar. When photoresist etch uniformity was measured for the operation with 2 MHz by etching photoresist on a 300 mm diameter substrate using 10 mTorr Ar/O₂ (9:1) mixture, the etch uniformity of about 5.5% could be obtained.     

Development of a multiresidue method for the determination of multiclass pesticides in soil using GC

The principal objective of the present study was to develop a multiresidue analytical method for 62 pesticides in a soil matrix. Soil samples were fortified with known quantities of pesticides at two different concentration levels (0.1 and 0.01 μg/g) and the analytes were extracted via a liquid–solid extraction method. The pesticides were separated on an HP5 capillary column and were detected by gas chromatography coupled to an electron capture detector (GC‐ECD). The method was validated, considering its good linearities (r² = 0.978–0.999), specificity and recovery characteristics. Recoveries were found between 70.3 and 113.4% for all pesticides except edifenphos (67.5%) and dichlobenil (69.5%) spiked at a 0.1 μg/mL concentration level and 74.5–117% except ethalfluralin (63.3%) and dichlobenil (51.9%) spiked at a concentration of 0.01 μg/mL. The developed method could be utilized as a simple and cost‐effective method for the routine analysis of 62 pesticides in soil samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Orthotropic strain rate potential for the description of anisotropy in tension and compression of metals

In this paper, a macroscopic anisotropic strain rate potential, which can describe both the anisotropy and tension-compression asymmetry of the plastic response of textured metals is derived. This strain rate potential is the exact work-conjugate of the anisotropic stress potential CPB06 of Cazacu et al. (2006). Application of the developed strain rate potential to HCP high-purity alpha-titanium is presented.     

Identification of the polymorphisms in IFITM3 gene and their association in a Korean population with ulcerative colitis

Interferons play critical roles in tumor pathogenesis by controlling apoptosis and through cellular anti-proliferative and differentiation activities. Interferon inducible transmembrane protein (IFITM) family genes have been implicated in several cellular processes such as the homotypic cell adhesion functions of IFN and cellular anti-proliferative activities. Expression levels of IFITM genes have been found to be up-regulated in gastric cancer cells and colorectal tumors. IFITM3 (also known as 1-8U) is a member of the IFITM family, and has been described as a key player in specification of germ cell fate. IFITM3 was first isolated from a genetic screen aimed at identifying genes involved in acquisition of germ cell competence. It has been proposed that epiblast cells have the highest expression of IFITM3 initiated germ cell specification and that homotypic association can discriminate germ cells from their somatic neighbors. In an attempt to better understand the genetic influences of IFITM3 on ulcerative colitis, we have identified possible variation sites and single nucleotide polymorphisms (SNPs) through two exons and their boundary IFITM3 intron sequences including the ~2.1 kb promoter regions. To determine whether or not these IFITM3 SNPs are associated with susceptibility to ulcerative colitis, frequencies of the genotype and allele of IFITM3 polymorphisms were analyzed on genomic DNAs isolated from patients with ulcerative colitis and from healthy controls. We also investigated the haplotype frequencies constructed by these SNPs in both groups. In this study, we also showed that expression level of IFITM3 mRNA was significantly higher in tissues of the ileum and cecum of the digestive system. We identified a total of seven SNPs and multiple variation regions in the IFITM3 gene. The genotype frequency of the g.-204T>G polymorphism in patients with ulcerative colitis was significantly different from that of the control group. Our results strongly suggest that polymorphisms of the IFITM3 gene may be associated with susceptibility to ulcerative colitis.     

Synthesis of fused phenylcarbazole phosphine oxide based high triplet energy host materials

High triplet energy host materials based on novel fused phenylcarbazole core structure and diphenylphosphine oxide were synthesized and the physical properties of the host materials were investigated. A high triplet energy of 2.95 eV was obtained from the fused phenylcarbazole based host materials and the energy levels could be manipulated using the diphenylphosphine oxide group. The fused phenylcarbazole based high triplet energy host materials showed excellent morphological stability at high temperature.     

Operation of industrial-scale electron beam wastewater treatment plant

Textile dyeing processes consume large amount of water, steam and discharge filthy and colored wastewater. A pilot scale e-beam plant with an electron accelerator of 1 MeV, 40 kW had constructed at Daegu Dyeing Industrial Complex (DDIC) in 1997 for treating 1,000 m³ per day. Continuous operation of this plant showed the preliminary e-beam treatment reduced bio-treatment time and resulted in more significant decreasing TOC, COD_Cr, and BOD₅. Convinced of the economics and efficiency of the process, a commercial plant with 1 MeV, 400 kW electron accelerator has constructed in 2005. This plant improves the removal efficiency of wastewater with decreasing the retention time in bio-treatment at around 1 kGy. This plant is located on the area of existing wastewater treatment facility in DDIC and the treatment capacity is 10,000 m³ of wastewater per day. The total construction cost for this plant was USD 4 M and the operation cost has been obtained was not more than USD 1 M per year and about USD 0.3 per each m³ of wastewater.     

Sulfonated poly(fluorene-co-sulfone)ether membranes containing perfluorocyclobutane groups for fuel cell applications

A new class of sulfonated poly(fluorene-co-sulfone)ether membranes containing perfluorocyclobutane (PFCB) groups were synthesized and characterized in terms of their electrochemical properties as proton exchange membranes for fuel cells. Two monomers, 9,9-bis(4-trifluorovinyloxyphenyl)fluorene and 4,4′-sulfonyl-bis(trifluorovinyloxy)biphenyl were synthesized and statistically copolymerized by thermal [2π + 2π] cycloaddition to yield a series of polymers containing 0–60 mol% of fluorenyl content (PFS-X). The copolymers were then sulfonated using chlorosulfonic acid to afford five kinds of ionomers with different sulfonation levels (SPFS-X), which were cast into membranes and analyzed in terms of electrochemical properties. It was found that the ion exchange capacity (IEC), water uptake, proton conductivity and methanol permeability values of SPFS-X increased with the increment of the sulfonated fluorenyl content. The proton conductivities of SPFS-50 and -60 with high IECs and water uptake values were higher than those of Nafion-115 between 25 and 80 °C. The methanol permeability of SPFS-X was considerably lower than that of Nafion-115.     

Radical-mediated intramolecular C-C bond formation and the deoxygenation of alcohols under solvent-free conditions with tributyl methyl ammonium hypophosphite

A green, solvent-free protocol was developed for the radical-mediated intramolecular cyclization of haloacetals and the deoxygenation of S-methyl dithiocarbonates and cyclic thionocarbonate. This process uses tributyl methyl ammonium hypophosphite as a H-donor in the presence of triethylborane or t-butyl peroxide. This methodology provides eco-friendly reaction conditions.     

Silver(I) ion selective ionophores containing dithiocarbamoyl moieties on steroid backbone

Tweezer-type and non-tweezer-type ionophores containing dithiocarbamoyl groups on a 7-deoxycholic amide or cholane derivatives were designed and synthesized. Potentiometric evaluation of the poly(vinyl chloride) (PVC) membranes containing those deoxycholic amides/cholanes linked with tweezer-type dithiocarbamoyl moieties showed excellent affinity and selectivity to silver(I) ion over alkali, alkaline earth and other transition metal cations. On the other hand, deoxycholic amides/cholanes substituted with one dithiocarbamoyl group, i.e., non-tweezer-type ionophores, resulted in relatively poor potentiometric sensitivity and detection limits. The enhanced potentiometric properties of newly synthesized tweezer-type dithiocarbamoyl containing ionophores have been further improved by employing silver ion complexing reagent in the internal reference solution, which resulted in greatly reduced detection limit (∼100 ppt) for the electrodes based on them.