Roles of TNF-alpha and IgE in the late phase of contact hypersensitivity induced by trimellitic anhydride

Trimellitic anhydride (TMA) is widely used industrially to make epoxy and alkyd resins, plasticizers and surfactants. The purpose of this study was to investigate whether contact hypersensitivity (CHS) is induced by repeated TMA challenge and the role of TNF-alpha and IgE in the TMA-induced CHS. The repetition of the challenge enlarged the extent of an early and a late phase of CHS in TNF-alpha+/+ (B6129SF2/J) and Balb/c mice. In the late phase of TMA-induced CHS, the peak of ear swelling responses by single challenge showed at 24 h after challenge, but the peak was observed at 8 h after repeated challenge. In the TNF-alpha knockout TNF-alpha-/- (B6;129S-Tnftm1Gk1) mice, the repetition of the TMA challenges enlarged the extent of the late phase of CHS, but less than those in TNF-alpha+/+ mice. Injection of anti-TNF-alpha antibody into the peritoneal cavity of Balb/c mice significantly decreased the extent of the late phase of CHS. Subcutaneous injection of anti-IgE antibody into Balb/c mice also decreased the extent of the late phase of CHS in dose-dependent manner. Histologically, infiltration of polymorphonuclear leukocytes and eosinophils was more pronounced in repeatedly TMA-challenged TNF-alpha+/+ and Balb/c mice than in the TNF-alpha-/- mice and anti-TNF-alpha or anti-IgE antibodies treated Balb/c mice. These results indicate that mice sensitized by TMA could possibly offer a useful model to study the mechanism of CHS, and TNF-alpha and IgE may act as potential modulators in the late phase of TMA-induced CHS. Neutralization of TNF-alpha and IgE by anti-TNF-alpha or anti-IgE antibodies may provide therapeutic tools for the treatment of TMA-induced CHS.     

Lifetime of living polymers in cationic polymerization. II. Living polymerization of isobutyl vinyl ether initiated by the hydrogen iodide/zinc halide systems

In the living cationic polymerization of isobutyl vinyl ether (IBVE) initiated by the hydrogen iodide/zinc halide (HI/ZnX₂; X = I, Br, Cl) systems, the concentration ([P^*]) of the living propagating species was determined by quenching with sodiomalonic ester ( 1 ). The quenching reaction was shown to be clean, instantaneous, and quantitative to give poly (IBVE) with a terminal malonate group from which [P^*] was obtained by ¹H-NMR spectroscopy. In the polymerizations in toluene below +25°C, [P^*] was constant and equal to the initial concentration ([HI]₀) of hydrogen iodide, independent of the type and concentrations of ZnX₂ as well as monomer conversion. At 0 and +25°C, however, the living species started decaying immediately after the complete consumption of monomer. In contrast, such a decay process was absent at ?15°C even in the absence of monomer until about an hour (depending on the conditions) after the end of polymerization. The deactivation reaction was first order in [P^*], and the lifetime (half-life) of the living species was longer at lower temperature and at lower ZnX₂ concentration. On the basis of these [P^*] and lifetime measurements, the HI/ZnX₂ systems were also compared with the HI/I₂ counterpart.     

Synthesis of highly enantioenriched all-carbon quaternary centers: conjugate additions of chiral organolithium nucleophiles to alpha,alpha-dinitrile beta,beta-disubstituted olefins

[reaction: see text]. Highly enantioenriched quaternary centers are obtained by the reaction of chiral lithiated intermediates complexed to (-)-sparteine with tetrasubstituted, alpha,alpha-dinitrile activated olefins. Lithiated N-Boc-N-Aryl benzylamine furnishes products with drs from 78:22 to 95:5, with ers exceeding 94:6. Lithiated N-Boc-N-Aryl allylamine reactants provide enecarbamate products with drs from 55:45 to 99:1, with ers ranging from 87:13 to 97:3.     

A new and convenient synthesis of N-substituted perhydroazepines from adipaldehyde and primary amines with tetracarbonylhydridoferrate,HFe(CO), as a selective reducing agent

Ethanolic tetracarbonylhydridoferrate combined with adipaldehyde is very efficient for the selective transformation of an amino group into perhydroazepine. A large variety of both aliphatic and aromatic amines react with adipaldehyde in the presence of tetracarbonylhydridoferrate at room temperature and carbon monoxide to give the corresponding N-alkyl- and N-arylperhydroazepines in good to excellent yields.     

Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

The 2-(4-trifluoromethylphenylsulfonyl)ethoxycarbonyl (Tsc) amino-protecting group: use in the solid-phase synthesis of pyrrole-imidazole polyamides

The development of the 2-(4-trifluoromethylphenylsulfonyl)ethoxycarbonyl (Tsc) function, a novel base-sensitive amino-protecting group, and its application to the preparation of DNA-binding polyamides are described. Pyrrole-imidazole polyamides were synthesized by an efficient solid-phase method under conditions compatible with Fmoc chemistry using two Tsc-protected amino acids, Tsc-Py-OH 1a and Tsc-Im-OH 1b.     

Optimum conditions for preparing micron-sized PMMA beads in the dispersion polymerization using PVA

The optimum conditions for preparing micron-sized monodisperse polymethylmethacrylate (PMMA) beads by dispersion polymerization in a methanol/water mixture were proposed. PMMA forming microspheres having an average molecular weight of 55,300 g/mol, 2.6 μm weight-average diameter, with a 5.3% coefficient of variation and 91% conversion, were successfully obtained in the presence of 15 wt.% of polyvinylalcohol (PVA), 100/50 (g/g) of MeOH/water mixtures at 70°C; the reaction lasted for 8 h. Compared to dispersion polymerization using polyvinylpirrolydone, PVA proved to be an extremely stable steric stabilizer in the dispersion polymerization of methylmethacrylate.     

Diaquabis(1,3‐propanediamine‐κ2N,N′)nickel(II) bis(sulfanilate)

The title compound, [Ni(C₃H₁₀N₂)₂(H₂O)₂](C₆H₆NO₃S)₂, contains alternating layers of sulfanilate anions and di­aqua­bis(1,3‐propane­di­amine)­nickel(II) cations. The Ni atom lies on an inversion centre and is hexacoordinated by the 1,3‐propane­di­amine ligands, which function as N,N′‐bidentate ligands, and the water mol­ecules, which are in a trans arrangement. The sulfanilate anions are arranged in layers, with the sulfonate and amine groups directed towards opposite sides of the layer. The structure is stabilized by a network of hydrogen bonding between the O and N atoms of the sulfanilate anions, the water mol­ecules, and the N atoms of the 1,3‐propane­di­amine ligands.