High-performance liquid chromatography with on-line coupled UV, mass spectrometric and biochemical detection for identification of acetylcholinesterase inhibitors from natural products

A high-performance liquid chromatography (HPLC) method with on-line coupled ultraviolet (UV), mass spectrometry (MS) and biochemical detection for acetylcholinesterase (AChE) inhibitory activity has been developed. By combining the separation power of HPLC, the high selectivity of biochemical detection, and the ability to provide molecular mass and structural information of MS, AChE inhibitors can be rapidly identified. The biochemical detection was based on a colorimetric method using Ellman's reagent. The detection limit of galanthamine, an AChE inhibitor, in the HPLC-biochemical detection is 0.3 nmol. The three detector lines used, i.e., UV, MS and Vis for the biochemical detection were recorded simultaneously and the delay times of the peaks obtained were found to be consistent. This on-line post-column detection technique can be used for the identification of AChE inhibitors in plant extracts and other complex mixtures such as combinatorial libraries.     

Interaction of ester functional groups with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy

The bonding of two types of ester group-containing molecules with a set of different oxide layers on aluminum has been investigated using infrared reflection absorption spectroscopy. The different oxide layers were made by giving typical surface treatments to the aluminum substrate. The purpose of the investigation was to find out what type of ester-oxide bond is formed and whether this is influenced by changes in the composition and chemistry of the oxide. The extent by which these bonded ester molecules resisted disbondment in water or substitution by molecules capable of chemisorption was also investigated. The ester groups were found to show hydrogen bonding with hydroxyls on the oxide surfaces through their carbonyl oxygens. For all oxides, the ester groups showed the same nu(C = O) carbonyl stretching vibration after adsorption, indicating very similar bonding occurs. However, the oxides showed differences in the amount of molecules bonded to the oxide surface, and a clear relation was observed with the hydroxyl concentration present on the oxide surface, which was determined from XPS measurements. The two compounds showed differences in the free to bonded nu(C = O) infrared peak shift, indicating differences in bonding strength with the oxide surface between the two types of molecules. The bonding of the ester groups with the oxide surfaces was found to be not stable in the presence of water and also not in the presence of a compound capable of chemisorption with the aluminum oxide surface.     

Alcoholysis of acylpalladium(II) complexes relevant to the alternating copolymerization of ethene and carbon monoxide and the alkoxycarbonylation of alkenes: the importance of Cis-coordinating phosphines

The mechanism and kinetics of the solvolysis of complexes of the type [(L-L)Pd(C(O)CH(3))(S)](+)[CF(3)SO(3)](-) (L-L = diphosphine ligand, S = solvent, CO, or donor atom in the ligand backbone) was studied by NMR and UV-vis spectroscopy with the use of the ligands a-j: SPANphos (a), dtbpf (b), Xantphos (c), dippf (d), DPEphos (e), dtbpx (f), dppf (g), dppp (h), calix-6-diphosphite (j). Acetyl palladium complexes containing trans-coordinating ligands that resist cis coordination (SPANphos, dtbpf) showed no methanolysis. Trans complexes that can undergo isomerization to the cis analogue (Xantphos, dippf, DPEphos) showed methanolyis of the acyl group at a moderate rate. The reaction of [trans-(DPEphos)Pd(C(O)CH(3))](+)[CF(3)SO(3)](-) (2e) with methanol shows a large negative entropy of activation. Cis complexes underwent competing decarbonylation and methanolysis with the exception of 2j, [cis-(calix-diphosphite)Pd(C(O)CH(3))(CD(3)OD)](+)[CF(3)SO(3)](-). The calix-6-diphosphite complex showed a large positive entropy of activation. It is concluded that ester elimination from acylpalladium complexes with alcohols requires cis geometry of the acyl group and coordinating alcohol. The reductive elimination of methyl acetate is described as a migratory elimination or a 1,2-shift of the alkoxy group from palladium to the acyl carbon atom. Cis complexes with bulky ligands such as dtbpx undergo an extremely fast methanolysis. An increasing steric bulk of the ligand favors the formation of methyl propanoate relative to the insertion of ethene leading to formation of oligomers or polymers in the catalytic reaction of ethene, carbon monoxide, and methanol.     

Phosphorus determination in milk and bone samples by neutron activation analysis

The determination of phosphorus in milk and bone samples by both radiochemical and instrumental neutron activation analysis is described. The radiochemical method consists of thermal neutron irradiation of samples and standards, sample dissolution, phosphorus precipitation as ammonium phosphomolyb-date, use of zinc holdback carrier and counting of the phosphorus-32 ß-activity. The instrumental method involves thermal neutron irradiation of samples and standards, waiting for a decay time and ß-counting. The methods were applied to commercial samples and reference materials.     

Determination of sulphuric acid in process effluent streams using sequential injection titration

Sulphuric acid in process effluent streams from an electrorefining copper plant was analysed with a sequential injection (SI) titration system using sodium hydroxide as titrant. In the proposed SI titration system a base titrant, acid analyte and base titrant zone were injected sequentially into a distilled water carrier stream in a holding coil and swept by flow reversal through a reaction coil to the detector. The base zones contained bromothymol blue as indicator and the endpoint was monitored spectrophotometrically at 620 nm. The influence of carrier stream flow rate, acid and base zone volumes and titrant concentration on the linear range of the method was studied to obtain an optimum. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 0.006-0.178 mol l(-1) of H(2)SO(4) for a NaOH concentration of 0.002 mol l(-1). The results obtained for the SI titration of process samples were in good agreement with a standard potentiometric method with an RSD<0.75% and a sample frequency of 23 samples h(-1).     

Smart materials based on self-assembled hydrogen-bonded comb-shaped supramolecules

Block copolymer self-assembly and supramolecular chemistry can be combined most naturally to prepare smart polymer nanomaterials. An attractive route is based on comb-shaped supramolecules, obtained by attaching side chains to (co)polymers by physical (non-covalent) interactions. Hydrogen bonding is a key element of our approach. It combines an ease of synthesis with other important approach-specific elements, such as hierarchical self-assembly, strongly enhanced processability, swelling, and cleaving. Functional properties discussed include anisotropic proton conductivity, switching proton conductivity, electronically conducting nanowires, polarized luminance, dielectric stacks (optical reflectivity), functional membranes, and nano objects.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

Determination of As, Sb, Se, Te and Bi in milk by slurry sampling hydride generation atomic fluorescence spectrometry

A simple and fast analytical procedure has been developed for the determination of As, Sb, Se, Te and Bi in milk samples by hydride generation atomic fluorescence spectrometry (HG-AFS). Samples were treated with aqua regia for 10 min in an ultrasound water bath and pre-reduced with KBr for total Se and Te determination or with KI and ascorbic acid for total As and Sb, the determination of Bi being possible in all with or without pre-reduction. Slurries of samples, in the presence of antifoam A, were treated with NaBH₄ in HCl medium to obtain the corresponding hydrides, and AFS measurements were processed in front of external calibrations prepared and measured in the same way as samples. Results obtained by the developed procedure compare well with those found after microwave-assisted complete digestion of samples. The proposed method is simple and fast, and only 1 ml of milk is needed. The values obtained for detection limit are 2.5, 1.6, 3, 6 and 7 ng l⁻¹ for As, Sb, Se, Te and Bi respectively in the diluted samples, with average relative standard deviation values of 3.8, 3.1, 1.9, 6.4 and 1.2% for three independent analysis of a series of commercially available samples of different origin. Data found in Spanish market samples varied from 3.2±0.3 to 11.3±0.2 ng g⁻¹ As, from 3.1±0.2 to 11.6±0.4 ng g⁻¹ Sb, from 10.7±0.5 to 25.5±0.4 ng g⁻¹ Se, from 0.9±0.2 to 9.4±0.6 ng g⁻¹ Te and from 11.5±0.1 to 27.7±0.4 ng g⁻¹ Bi.     

Rapid and flexible synthesis of 1-deoxy-D-xylulose-5-phosphate, the substrate for 1-deoxy-D-xylulose-5-phosphate reductoisomerase

1-Deoxy-D-xylulose-5-phosphate (DXP) is a key intermediate in the non-mevalonate pathway to terpenoids in bacteria, and it is the substrate for the enzyme 1-deoxy-D-xylulose-5-phosphate reductoisomerase (DXP-R). In order to study the mechanism of DXP-R, we required a flexible synthesis of the substrate which would allow the incorporation of isotopic labels, and the variation of the two stereocentres. Thus 1,4-dihydroxypent-2-yne was selectively reduced to give the E-olefin, and selective phosphorylation of the primary alcohol followed by oxidation of the secondary alcohol gave a substrate suitable for dihydroxylation. Dihydroxylation using stoichiometric OsO4 in the presence of chiral ligands gave protected DXP in high ee. Final hydrogenolysis gave DXP in quantitative yield and high purity. DXP-R was produced by rapid cloning of the dxr gene from Escherichia coli through controlled expression and ion exchange chromatography. The synthetic DXP was fully active in enzyme assays catalysed by recombinant DXP-R.     

Phytochromes with noncovalently bound chromophores: the ability of apophytochromes to direct tetrapyrrole photoisomerization

Chromophore-apoprotein interactions were studied with recombinant apoproteins, oat phytochrome (phyA) and CphB of the cyanobacterium Calothrix PCC7601, which were both incubated with the bilin compounds biliverdin (BV) IXalpha, phycocyanobilin (PCB) and the 3'-methoxy derivative of PCB. Previously it was shown that CphB and its homolog in Calothrix, CphA, show strong sequence similarities with each other and with the phytochromes of higher and lower plants, despite the fact that CphB carries a leucine instead of a cysteine at the chromophore attachment position and thus holds the chromophore only noncovalently. CphA binds tetrapyrrole chromophores in a covalent, phytochrome-like manner. For both eyanobacterial phytochromes, red and far-red light-induced photochemistry has been reported. Thus, the role of the binding site of CphB in directing the photochemistry of noncovalently bound tetrapyrroles was analyzed in comparison with the apoprotein from phyA phytochrome. Both the aforementioned compounds, which were used as chromophores, are not able to form covalent bonds with a phytochrome-type apoprotein because of their chemical structure (vinyl group at position 3 or methoxy group at position 3'). The BV adducts of both apoproteins showed phytochrome-like photochemistry (formation of red and far-red-absorbing forms of phytochrome [P(r) and P(fr) forms]). However, incubation of the oat apophytochrome with BV primarily yields a 700 nm form from which the P(r)-P(fr) photochemistry can be initiated and to which the system relaxes in the dark after illumination. The results for CphB were compared with a CphB mutant where the chromophore-binding cysteine had been introduced, which, upon incubation with PCB, shows spectral properties nearly identical with its (covalently binding) CphA homolog. A comparison of the spectral properties (P(r) and P(fr) forms) of all the PCB- and BV-containing chromoproteins reveals that the binding site of the cyanobacterial apoprotein is better suited than the plant (oat) phytochrome to noncovalently incorporate the chromophore and to regulate its photochemistry. Our findings support the proposal that the recently identified phytochrome-like prokaryotic photoreceptors, which do not contain a covalently bound chromophore, may trigger a light-induced physiological response.