Determination of the plasticizer N-butylbenzenesulfonamide and the pharmaceutical Ibuprofen in wastewater using solid phase microextraction (SPME)

A rapid, inexpensive and solvent-free method for the simultaneous determination of the polyamide plasticizer N-butylbenzenesulfonamide (NBBS) and the widely used pharmaceutical Ibuprofen by solid phase microextraction (SPME) combined with gas chromatography/mass spectrometry (GC/MSD) in wastewater samples was developed. Besides the optimized analytical conditions, results of investigations with varying analytical parameters are reported. Problems, which may occur during the analytical procedure (e.g. salt deposits, adsorption phenomena, carry-over), are discussed. For the determination of Ibuprofen, it is important to carry out the extraction under acidic conditions with sufficiently buffered samples; the GC/MSD system must be very clean and well maintained. SPME allows an extraction of Ibuprofen without derivatization of its carboxylic group. For quantification in complex matrices, the standard addition technique is necessary. Limit of detection and limit of determination are 0.1 μg/L for both analytes. NBBS and Ibuprofen were detected in several raw and treated wastewater samples from municipal wastewater treatment plants in the range from < 0.1 to 3.5 μg/L.     

Xyloketal H from the mangrove endophytic fungus Xylaria sp. 2508

(3R*,3aR*,9aR*)-3,9a-Dimethyl-2,3,3a,9a-tetrahydro-4H-furo[2,3-b]chromene-5,7-diol (xyloketal H), a representative of a new family of xyloketals, was isolated from the marine-derived mangrove fungus Xylaria sp. 2508. Its structure was elucidated by spectroscopic data and single-crystal X-ray diffraction analysis. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1051–1052, June, 2006.     

Absolute rate constants for the quenching of reactive excited states by melanin and related 5,6-dihydroxyindole metabolites: implications for their antioxidant activity

The triplet-excited state of benzophenone and the singlet-excited state of 2,3-diazabicyclo[2.2.2]oct-2-ene (Fluorazophore-P) have been employed as kinetic probes to obtain information on the antioxidant activity of the skin and eye pigment melanin and its biogenetic precursors 5,6-dihydroxyindole (DHI) and 5,6-dihydroxyindole-2-carboxylic acid (DHICA). The excited states were generated by the laser-flash photolysis technique and their reaction kinetics was examined by time-resolved transient absorption or fluorescence spectroscopy, respectively. The reaction between triplet benzophenone and DHI produced with unit efficiency the corresponding 6O-centered semiquinone radical, which was characterized by its characteristic transient absorption. The quenching rate constants for DHI (3.1-8.4 x 10(9) M-1 s-1) and DHICA (3.3-5.5 x 10(9) M-1 s-1) were near the diffusion-controlled limit, indicating excellent antioxidant properties. Kinetic solvent effects were observed. The reactivity of synthetic melanin, assessed through the quenching rate constant of Fluorazophore-P and normalized to the number of monomer units, was more than one order of magnitude lower (2.7 x 10(8) M-1 s-1) than that of its precursors. The trend of the quenching rate constants, i.e. DHI > DHICA approximately alpha-tocopherol > melanin, along with the preferential solubility of DHICA in aqueous environments, serves to account for several experimental results from biochemical studies on the inhibition of lipid peroxidation by these natural antioxidants.     

Determination of zearalenone and ochratoxin A in soil

Mycotoxins are secondary metabolites, formed by the action of fungi on agricultural crops in the field or during storage. These metabolites are highly toxic to animals and humans and high levels have been measured in agricultural crops. In order to evaluate human risks due to ingestion of mycotoxin-contaminated food different methods have been developed for analysis of mycotoxins in cereals and maize. In this project the focus was on mycotoxins in agricultural soil and the fate of these toxins in the soil-water-plant system. Two different mycotoxins were selected in the study: zearalenone (ZON) produced by species of Fusariumor Aspergillusand ochratoxin A (OTA) produced by species of Penicillium. We developed a method for analysis of these toxins in soil. Soil samples were extracted with methanol-water (9:1) and purified by solid-phase extraction (SPE, C8-columns). The final extract was analysed using high-pressure liquid chromatography (HPLC) with fluorescence detection. A Phenyl Hexyl column was used to separate the toxins. The detection limits obtained were 0.1 and 1.0 microg kg(-1) dry weight (dw) for OTA and ZON, respectively. The developed method has been used for analysis of different soils in connection with growth chamber experiments. The soil types used in the growth chamber experiments were a sandy soil, a sandy clay soil, and a soil with high content of organic matter. The recovery was determined as 85.8 and 93.4% and the repeatability to 5.1 and 12.8% for OTA and ZON, respectively. The reproducibility obtained was 8.5 and 15.0% for soil samples, representing concentration levels from 0.2-30 microg kg(-1) dw (OTA) and from 1.0-100 microg kg(-1) dw (ZON).     

Synergies between micropreparative high-performance liquid chromatography and an instrumental optical biosensor

The recent development of an automated surface plasmon resonance technology for the measurement of biomolecular interactions (Pharmacia BIAcore) has provided new opportunities for the detection and analysis of protein-protein interactions. In the BIAcore, detection is based on changes in surface plasmon resonance which are monitored optically. Changes in surface plasmon resonance correspond to changes in surface concentration of macromolecules and can be monitored in real time.

We have found that the detection sensitivity obtainable with this technology (ng/ml concentrations of specific ligands are readily detectable for many applications) is complementary “in a bidirectional manner” to micropreparative HPLC. Thus micropreparative HPLC may be used to purify and characterise reagents for the biosensor, whilst the biosensor may be used to define chromatographic parameters such as elution conditions for affinity chromatography or serve as an affinity detector for fractions obtained during chromatographic purification.

Examples of such applications, including the potential of the biosensor to search for and monitor the purification of unknown ligands for which the target molecule has been identified, are shown. In particular, the use of the biosensor to monitor the purification of soluble epidermal growth factor receptor from A431 cell conditioned media is demonstrated.     

Acyl- und Alkylidenphosphane. XXVIII. Synthese und Struktur von 1,3-Dibenzyl- und 1,3-Diethyl-2,4-bis(phenylimino)-1,3-diphosphetan

Acyl- and Alkylidenephosphines. XXVIII. Synthesis and Structure of 1,3-Dibenzyl- and 1,3-Diethyl-2,4-bis(phenylimino)-1,3-diphosphetane Catalyzed by small amounts of solid sodium hydroxide, the adducts 1a and 1b formed from benzyl- or ethylbis(trimethylsilyl)phosphine and phenylisocyanate, react at +20°C slowly to give hexamethldisiloxane and oligomeric [(phenylimino)methylidene]phosphines. In different solvents the benzyl compound was found to exist only as a mixture of [N,N′-(E)/(Z)]-isomeric 2,4-bis-(phenylimino)-1,3-diphosphetanes 2a with their alkyl groups at the phosphorus atoms in trans position, whereas in case of the ethyl derivative 2b a second pair of [N,N′-(E)/(Z)]-isomeric dimers with their substituents in cis position and two trimeric forms ( 3b and 4b ) could be detected in cyclopentane. [N,N′-(E)]-1r,3t-dibenzyl- ( 2a ) and [N,N′-(E)]-1r,3t-diethyl-2,4-bis(phenylimino)-1,3-diphosphetane 2b isolated from 1,2-dimethoxyethane or cyclopentane, crystallize in the monoclinic space group P2₁/c or P2₁/n, resp., with following dimensions of the unit cell determined at temperatures of measurement of +20 ± 3°C/?130 ± 3°C: a = 2145.4(1)/569.3(1); b = 568.1(2)/719.1(2); c = 1960.2(2)/2042.6(4) pm; β 99.43(1)°/95.03(2)°; Z = (2+2) and 2, resp. X-ray structure determinations (R_w = 0.034/0.041) show both molecules to be centrosymmetric. Characteristic rounded bond lengths (pm) and angles (°) are: endocyclic P? C 185/184; C? P? C 82/81; P? C? P 98/99; exocyclic P? C 186/184; C?N l27/127; C?N? C 121/11.     

Synthesis and X-ray crystal structures of six [TeL4][MF6] salts, where L is ethylene- or trimethylene-thiourea, and M is Si, Ge or Sn. Five Te(II) complexes with a novel type of structure linked together by unusual N–HF hydrogen bonds

The complexes [Te(etu)₄][SiF₆] (1), [Te(etu)₄][SiF₆] · H₂O (2), [Te(trtu)₄][SiF₆] (3), [Te(etu)₄][GeF₆] · H₂O (4), [Te(trtu)₄][GeF₆] (5) and [Te(etu)₄][SnF₆] (6) (etu = ethylenethiourea, trtu = trimethylenethiourea) have been prepared and their crystal structures determined by X-ray crystallographic methods. The crystals of 1, 3 and 5 are tetragonal; space groups P4cc (No. 103) with Z = 4 for 1, P4nc (No. 104) with Z = 2 for 3, and I4 (No. 79) with Z = 2 for 5. The crystals of 2, 4 and 6 are orthorhombic, space group Pccn (No. 56) with Z = 8 for 2 and 4 and Z = 4 for 6; those of 2 and 4 being isomorphous. The cations contain square planar or slightly distorted square planar TeS₄ coordination groups. In 1, 3 and 5 the Te atoms are located on fourfold rotation axes; the cations have fourfold rotational symmetry and the four thiourea ligands extend to the same side of the TeS₄ plane. These are the first examples of [TeL₄]²⁺ conformers of this type. In 2 and 4 the Te atoms lie on general positions; the cations are distorted versions of those in 1, and also in these the four ligands extend to the same side of the TeS₄ plane. In 6 the Te atoms are located on twofold rotation axes, the conformation of the cations corresponds to the point group C₂ with two neighbouring ligands extending to one side of the coordination plane and the remaining two to the opposite side. In 1–5 each of the four ligands forms a N–HF bond to the same F atom in the counter ion. The crystals of 1–5 are red, and those of 6 are yellow. The red colour is attributed to interactions of Te and S lone electron pairs caused by ligand TeS₄/TeSC tilt angles markedly different from 90°.     

Photoelectron spectroscopy on thin films of extended zinc porphyrazines

Photoemission measurements were performed on a series of stepwise benzoannelated zinc porphyrazine molecules in thin films. The electronic structure of tert-butyl-substituted zinc tetraazaporphyrin, phthalocyanine, and naphthalocyanine is investigated using mainly EUV synchrotron radiation. A detailed analysis of the zinc satellites in the spectra of the valence region is performed in an attempt to infer the effect of ligand size extension on the metal-ligand interactions. No differences in the character of the bond between zinc and ligand were detected as a function of ligand size. The results are compared with those for the respective metal-free and copper-containing molecules.