Eine neue photometrische bestimmung für nickel mit aethylendiamintetraessigsäure

It is possible to determine very high concentrations of nickel photometrically by means of ethylenediaminetetra-acetic acid, by working at a pH between 4.55 and 6.82. The absorption curves obtained for this complex are very reproducible; for these measurements an Elko II apparatus with filter S57E is used. High concentrations of ammoniacal salts hinder the measurement. The formation of the complex is not influenced by the anion of the compound of nickel used. The Lambert-Beer law is followed for strengths of nickel of 40 — 5000 mg/100 ml. This procedure is convenient for alloys rich in nickel.     

Matrix-isolation-FTIR spectroscopy with an integrating sphere

The use of an integrating sphere for the measurement of absorption spectra of thin films is described. The thin film (for example a rare gas matrix) is grown directly on the inside surface of the sphere. Multiple reflections inside the integrating sphere lead to significant enhancement of weak absorptions of the film, increasing the sensitivity of such measurements.     

High-resolution/higher-order derivative spectrophotometry in microanalytical chemistry

Summary Examples are given of the application of higher-order derivative spectrophotometry to microanalytical problems, including the increase in sensitivity for estimation of Zn and Cd dithizonates and the quantitative detection of arenes, aniline and phenols. We also describe the estimation of saccharin in soft drinks, and the characterization and estimation of dyes in solution and after absorption on a thin layer of alumina. Only ng-g amounts of substance are needed.

---

Hochauflösende UV/VIS-Derivativspektrophotometrie höherer Ordnung in der Mikroanalytik

Zusammenfassung Einige Beispiele für die Anwendung der Derivativspektrophotometrie höherer Ordnung in der Mikroanalyse wurden angegeben. Im besonderen wurden die Erhöhung der Empfindlichkeit der Zn- und Cd-Dithizonat-Bestimmung, die quantitative Bestimmung von Arenen, Anilin, Phenol, die Erfassung von Saccharin in Limonaden und sowohl die Charakterisierung als auch die quantitative Bestimmung von Farbstoffen in Lösung oder adsorbiert an einer dünnen Schicht Aluminiumoxid beschrieben. Es werden nur einige Mikrogramm bis Nanogramm Substanz für die Untersuchungen benötigt.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Soft vesicles formed by diblock codendrimers of poly(benzyl ether) and poly(methallyl dichloride)

The synthesis of a block codendrimer (g3-PBE-b-g3-PMDC), composed of a third-generation poly(benzyl ether) (PBE) monodendron and an aliphatic polyether (PMDC) monodendron is reported. In THF/diiospropyl ether (1:1) the PMDC block functions as a "hydrophilic" block, while the PBE acts as a "hydrophobic" block. The codendrimer can form interdigitated layers leading to vesicle formation. Tapping mode atomic force microscopy (AFM), dynamic light scattering (DLS), and transmission electron microscopy (TEM) were used to characterize the vesicles. The effect of molecular architecture on the formation of the interdigitated layers and vesicles was studied.     

A 3D QSAR study on a set of dopamine D4 receptor antagonists

The molecular alignments obtained from a previously reported pharmacophore model have been employed in a three-dimensional quantitative structure-activity relationship (3D QSAR) study, to obtain a more detailed insight into the structure-activity relationships for D(2) and D(4) receptor antagonists. The frequently applied CoMFA method and the related CoMSIA method were used. Statistically significant models have been derived with these two methods, based on a set of 32 structurally diverse D(2) and D(4) receptor antagonists. The CoMSIA and the CoMFA methods produced equally good models expressed in terms of q(2) values. The predictive power of the derived models were demonstrated to be high. Graphical interpretation of the results, provided by the CoMSIA method, brings to light important structural features of the compounds related to either low- or high-affinity D(2) or D(4) antagonism. The results of the 3D QSAR studies indicate that bulky N-substituents decrease D(2) binding, whereas D(4) binding is enhanced. Electrostatically favorable and unfavorable regions exclusive to D(2) receptor binding were identified. Likewise, certain hydrogen-bond acceptors can be used to lower D(2) affinity. These observations may be exploited for the design of novel dopamine D(4) selective antagonists.     

α-D-Glycosyl-Substituted α,α-D-Trehaloses with (1 → 4)-Linkage: Syntheses and NMR Investigations

Two symmetrical trehalose glycosyl ‘acceptors’ 4 and 6 were prepared and three of the unsymmetrical type, 8 , 10 , and 11 . Glucosylation of symmetrical ‘acceptor’ 4 gave a higher yield of trisaccharide (44%) than protect ve-group manipulation, namely via selective debenzylidenation 2 → 9 or monoacetylation 2 → 5 which proceeded in moderate yields (33–34%). A comparison of catalysts in the cis-glucosylation of trehalose ‘acceptor’ 10 with tetra-O-benzyl-β-D -glucopyranosyl fluoride 13 profiled triflic anhydride ((Tf)₂O) as a new reactive promoter yielding 92% of trisaccharide 14 , deblocking gave the target saccharide α-D -glucopyranosyI-( 1 → 4 )-α,α-D -trehalose. ¹H-NMR spectra of most compounds were analyzed extensively. The use of the ID TOCSY technique is advocated for its time efficiency, if needed supplemented by ROESY experiments.     

Über Chrom(II)-carboxylate und Halogenochromate(II)

Highly pure chromium(II) acetate, was obtained from chromium powder and anhydrous acetic acid in the presence of a small amount of acetylhalide. Cr^II acetate reacts with acetyl halide in anhydrous acetic acid to sesquisolvates like CrCl₂ · 3/2 CH₃COOH. If one equivalent of alkali acetate or an organic nitrogen base is added to solutions of Cr^II acetate in acetyl halide/acetic acid mixtures, trihalochromates(II) are precipitated which are hexagonal in structure, except the ammonium and the potassium salt. With two equivalents of alkali or ammonium acetate tetrachlorochromates(II) of cesium, rubidium and ammonium are precipitated. They are tetragonal in structure (K₂NiF₄ type). Using pyridinium acetate with various mixtures of acetyl bromide and acetic acid, only the solvates (PyH)₃(CrBr₅) · 2CH₃COOH is formed.     

Phosphaniminato-Komplexe des Antimons. Die Kristallstrukturen von [Sb2Cl5(NPMe3)2][SbCl6] · CH3CN und [SbCl(NPPh3)]2[SbCl6]2 · 6 CH3CN

Phosphorane Iminato Complexes of Antimony. The Crystal Structures of [Sb₂Cl₅(NPMe₃)₂][SbCl₆] · CH₃CN and [SbCl(NPPh₃)]₂[SbCl₆]₂ · 6 CH₃CN The title compounds are formed by reaction of antimony pentachloride in acetonitrile solution with the phosphorane iminato complexes SbCl₂(NPMe₃) and SbCl₂(NPPh₃), respectively, which themselves are synthesized by reaction of antimony trichloride with Me₃SiNPR₃ (R = Me, Ph). The complexionic compounds are characterized by ¹²¹Sb Mössbauer spectroscopy and by crystal structure determinations. [Sb₂Cl₅(NPMe₃)₂][SbCl₆] · CH₃CN: Space group P4₁, Z = 4, 3 698 observed unique reflections, R = 0.022. Lattice dimensions at ?60°C: a = b = 1 056.0(1), c = 2 709.6(2) pm. The structure consists of SbCl₆^? ions and cations [Sb₂Cl₅(NPMe₃)₂(CH₃CN)]⁺, in which one Sb^III atom and one Sb^V atom are bridged by the N atoms of the phosphorane iminato ligands. [SbCl(NPPh₃)]₂[SbCl₆]₂ · 6 CH₃CN: Space group P1 , Z = 2, 5 958 observed unique reflections, R = 0.033. Lattice dimensions at ?60°C: a = 989.4(11), b = 1 273(1), c = 1 396(1) pm, α = 78.33(7), β = 77.27(8)°, γ = 86.62(8)°. The structure consists of SbCl₆^? ions and centrosymmetric cations [SbCl(NPPh₃)(CH₃CN)₂]₂²⁺, in which the antimony atoms are bridged by the N atoms of the phosphorane iminato ligands.     

Stereochemistry of [4 + 2] Cycloadditions of Perfluorinated Selenocarbonyls to 1, 3‐Dienes

In completely stereospecific [4+2] cycloadditions, the perfluorinated selenocarbonyls 1 and 2 react both with trans‐trans‐2, 4‐hexadiene and cis‐trans‐2, 4‐hexadiene to yield 3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2H‐selenapyrans 3 , 4a and 4b . The observed stereoselectivity leads to the conclusion, that the [4+2] cycloaddition of perfluorinated selenocarbonyls follows a concerted pathway. An identical mixture of isomers was isolated when using the precursor for 2 , trimethylstannyl (pentafluoroethyl)selane, which reacts with both 1, 3‐dienes over several weeks to form a mixture of syn‐2‐fluoro‐3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2‐trifluoromethyl‐2H‐selenapyran ( 4a ) and anti‐2‐fluoro‐3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2‐trifluoromethyl‐2H‐selenapyran ( 4b ) in the same ratio as found for 2 , thus proving the intermediate formation of Se=C(F)CF₃ ( 2 ). Complex 2D NMR experiments were used to distinguish the isomers 4a and 4b and to assign the ¹H, ¹³C and ¹⁹F NMR data of the selenaheterocycles.