Surface-functionalized latex particles as controlling agents for the mineralization of zinc oxide in aqueous medium

Polystyrene latex particles modified at the surface with different hydrophilic functional groups were prepared by miniemulsion polymerization and used as controlling agents in the crystallization of zinc oxide from aqueous medium. The effects of the chemical nature of the surface functionalization and the latex concentration on the crystal growth, morphology, and crystalline structure of the resulting zinc oxide were analyzed. Micro- and submicrosized crystals with a broad variety of morphologies depending on the functionalization were obtained. Among the different latexes studied, the acrylic-acid-derived particles were shown to be a convenient system for further quantitative investigations. In this case, as the additive concentration increases, the length-to-width ratio (aspect ratio) of the crystals decreases systematically. Preferential adsorption of the latex particles onto the fast-growing faces {001} of ZnO is assumed to follow a Langmuir-type isotherm, and interaction of the adsorbed particles with the growth centers will reduce the growth rate in [001]. This leads to a quantitative relationship linking the aspect ratio to the latex concentration at constant diameter and surface chemistry of the latex. The dependence of the aspect ratio on charge density of the latex can also be modeled by an algorithm in which attractive forces between the latex particle and the ZnO surface are balanced against repulsive forces of an osmotic nature. The latter are associated with the confined volume between the crystal and latex particle surfaces.     

First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

Ferromagnetism and chirality in two-dimensional cyanide-bridged bimetallic compounds

The combination of hexacyanoferrate(III) anions, [Fe(CN)(6)](3)(-), with nickel(II) complexes derived from the chiral ligand trans-cyclohexane-1,2-diamine (trans-chxn) affords the enantiopure layered compounds [Ni(trans-(1S,2S)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (1) and [Ni(trans-(1R,2R)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (2). These chiral systems behave as ferromagnets (T(c) = 13.8 K) with a relatively high coercive field (H(c) = 0.17 T) at 2 K. They also exhibit an unusual magnetic behavior at low temperatures that has been attributed to the dynamics of the magnetic domains in the ordered phase.     

Equation of state of nonadditive d-dimensional hard-sphere mixtures

An equation of state for a multicomponent mixture of nonadditive hard spheres in d dimensions is proposed. It yields a rather simple density dependence and constitutes a natural extension of the equation of state for additive hard spheres proposed by us [A. Santos, S. B. Yuste, and M. Lopez de Haro, Mol. Phys. 96, 1 (1999)]. The proposal relies on the known exact second and third virial coefficients and requires as input the compressibility factor of the one-component system. A comparison is carried out both with another recent theoretical proposal based on a similar philosophy and with the available exact results and simulation data in d=1, 2, and 3. Good general agreement with the reported values of the virial coefficients and of the compressibility factor of binary mixtures is observed, especially for high asymmetries and/or positive nonadditivities.     

Chemoselective hydrogenation catalysts: Pt on mesostructured CeO2 nanoparticles embedded within ultrathin layers of SiO2 binder

Pt on mesostructured CeO(2) nanoparticles embedded within ultrathin layers of highly structured SiO(2) binder shows highest activity reported with 80% selectivity for the chemoselective hydrogenation of crotonaldehyde. Characterization by transmission electron microscopy (TEM), CO adsorption, and X-ray photoelectron spectroscopy (XPS) show the presence of small Pt metal particles, preferentially located on CeO(2) (70%) together with the formation of Pt-CeO(2-x) sites at the interface between Pt and CeO(2) (4 nm) nanoparticles. These sites are able to polarize the carbonyl group and facilitate the selective hydrogenation of this with respect to the double bond.     

Can semi-empirical models describe HCl dissociation in water?

We discuss the failure of commonly used AM1 and PM3 semiempirical methods to correctly describe acid dissociation. We focus our analysis on HCl because of its physicochemical importance and its relevance in atmospheric chemistry. The structure of non-dissociated and dissociated HCl – (H₂O) _n clusters is accounted for. The very bad results obtained with PM3 (and also with AM1) are related to large errors in gas-phase proton affinity of water and gas-phase acidity of HCl. Indeed, estimation of pKa values shows that neither AM1 nor PM3 are able to predict HCl dissociation in liquid water since HCl is found to be a weaker acid than H₃O⁺. We have proposed in previous works a modified PM3 approach (PM3-MAIS) adapted to intermolecular calculations. It is derived from PM3 by reparameterization of the core–core functions using ab initio data. Since parameters for H–Cl and O–Cl core–core interactions were not yet available, we have carried out the corresponding optimization. Application of the PM3-MAIS method to HCl dissociation in HCl–(H₂O) _n clusters leads to a huge improvement over PM3 results. Though the method predicts a slightly overestimated HCl acidity in water environment, the overall agreement with ab initio calculations is very satisfying and justifies efforts to develop new semiempirical methods.     

Morphology,surface roughness,electron inelastic and quasielastic scattering in elastic peak electron spectroscopy of polymers

In elastic peak electron spectroscopy (EPES), the nearest vicinity of elastic peak in the low kinetic energy region reflects electron inelastic and quasielastic processes. Incident electrons produce surface excitations, inducing surface plasmons, with the corresponding loss peaks separated by 1–20 eV energy from the elastic peak. In this work, X‐ray photoelectron spectroscopy (XPS) and helium pycnometry are applied for determining surface atomic composition and bulk density, whereas atomic force microscopy (AFM) is applied for determining surface morphology and roughness. The component due to electron recoil on hydrogen atoms can be observed in EPES spectra for selected primary electron energies. Simulations of EPES predict a larger contribution of the hydrogen component than observed experimentally, where hydrogen deficiency is observed. Elastic peak intensity is influenced more strongly by surface morphology (roughness and porosity) than by surface excitations and quasielastic scattering of electrons by hydrogen atoms. Copyright © 2007 John Wiley & Sons, Ltd.     

Solid-phase spectrophotometric microdetermination of iron with ascorbic acid and ferrozine

 A very sensitive and selective method for the determination of trace amounts of iron has been developed, based on the reduction of Fe(III) to Fe(II) by ascorbic acid, followed by chromogenic chelation of Fe(II) with ferrozine. The complex Fe(II)-ferrozine is easily sorbed on a dextran-type anion-exchange gel packed in a 1 mm cell, and the absorbance of the gel is measured directly at 569 and 800 nm. The extended linear range of the determination is 0.5–10 ng ml^-1 of iron (apparent molar absorptivity=4.4×10⁷ l mol^-1 cm^-1) and the precision (RSD) 1.3% for a concentration of 5 ng ml^-1 of iron (n=10). The detection limit for a sample volume of 1000 ml, using 0.040 g of anion-exchanger, corresponds to 0.12 ng ml^-1. The method has been successfully applied to the determination of iron in natural and waste waters, wine, soil extract and previously digested vegetal tissues, drugs and human hair. Received: 20 November 1995/Revised: 23 January 1996/Accepted: 26 January 1996     

Effect of applied curent on copper sulphide-based ion-selective electrodes

The properties of precipitate-based copper sulphide electrodes are investigated. Solid-phase studies wre done by x-ray photoelectron spectroscopy and solution-phase studies by combined potentiometric and atomic absorptioni spectrometric techniques. The predominant valence state of copper in the copper sulphide samples is shown to be Cu(I), but Cu(II) can also be identified at the surfaces. The oxidation of the membrane surface results in dissolution of copper ion and a decrease in the Cu/S ratio in the solid phase; reduction of the surface causes sulphide dissolution and an increase in the Cu/S ratio. Application of anodic or cathodic curents was used to study the redox behaviour of the copper suphide memebrane.     

Cross-sections of 14 MeV neutron reactions producing short-lived nuclides

The cross-sections for the production of the short-lived nuclides:^26mAl,^197mAu,^136mBa,^79mBr,^139mCe,³⁴Cl,^167mEr,^114m3In,^114m2In,^38mK,^38mCl,²⁶Na,²⁰F,¹⁹²Re,^207mPb,^203mPb,^46mSc,^183mW,^90mZr obtained from (n, 2n), (n, n′), (n, alpha), (n,p) reactions using 14 MeV neutrons, were evaluated by the activation method. The experimental results of this work were compared with those obtained by other authors.