Zwei neue Silicat-Chloride mit zweiwertigem Europium: LiEu3[SiO4]Cl3 und Li7Eu8[SiO4]4Cl7

Two New Silicate-Chlorides with Divalent Europium: LiEu₃[SiO₄]Cl₃ and Li₇Eu₈[SiO₄]₄Cl₇ LiEu₃[SiO₄]Cl₃ was prepared by reaction of LiCl with Eu₂SiO₄ and Li₇Eu₈[SiO₄]₄Cl₇ from Li with Eu₂O₃, SiO₂ and LiCl. The crystal structures of LiEu₃[SiO₄]Cl₃ (Pmna, a = 946.95(13); b = 699.52(8); c = 1 368.0(2) pm; Z = 4; R1 = 0.0325, R2_w = 0.0642) and Li₇Eu₈[SiO₄]₄Cl₇ (P2₁/c; a = 851.85(5); b = 948.62(7); c = 1 679.0(2) pm; β = 96.221(8)°; Z = 2; R1 = 0.0352, R2_w = 0.0744) were determined from four-circle diffractometer data. LiEu₃[SiO₄]Cl₃ contains [Li(SiO₄)₂] units and LiCl₆ octahedra while in Li₇Eu₈[SiO₄]₄Cl₇ larger ?lithosilicate”? groups are found. In both structures, the Eu²⁺ ions are coordinated mostly eightfold by O^2? and Cl^? ligands.     

Gear effect—10 : Conformational aspects of the positive or negative buttressing effects of methyl groups: polymethylpyridines

The effect of the shape of a methyl group on reactivity, which cannot be accounted for by considering a methyl group as a spherical substituent with the appropriate van der Waals radius, was considered in kinetics of alkylalion of substituted pyridines and barriers to rotation and ground state conformations of an isopropyl group attached to a planar framework. The perturbation of a methyl group by an o-methyl group is accounted for by a unique conformational explanation which involves the polyhedral shape of the methyl group.     

Grid-free DFT implementation of local and gradient-corrected XC functionals

Following an approach to density functional theory calculations based on the matrix representation of operators, we implemented a scheme as an alternative to traditional grid-based methods. These techniques allow integrals over exchange-correlation operators to be evaluated through matrix manipulations. Both local and gradient-corrected functionals can be treated in a similar way. After deriving all the required expressions, selected examples with various functionals are given. Received: 7 March 1998 / Accepted: 21 May 1998 / Published on line: 6 August 1998     

Influence of the distal his in imparting imidazolate character to the proximal his in heme peroxidase: (1)h NMR spectroscopic study of cyanide-inhibited his42-->ala horseradish peroxidase

The functional higher oxidation states of heme peroxidases have been proposed to be stabilized by the significant imidazolate character of the proximal His. This is induced by a "push-pull" combination effect produced by the proximal Asp that abstracts ("pulls") the axial His ring N(delta)H, along with the distal protonated His that contributes ("pushes") a strong hydrogen bond to the distal ligand. The molecular and electronic structure of the distal His mutant of cyanide-inhibited horseradish peroxidase, H42A-HRPCN, has been investigated by NMR. This complex is a valid model for the active site hydrogen-bonding network of HRP compound II. The (1)H and (15)N NMR spectral parameters characterize the relative roles of the distal His42 and proximal Asp247 in imparting imidazolate character to the axial His. 1D/2D spectra reveal a heme pocket molecular structure that is highly conserved in the mutant, except for residues in the immediate proximity of the mutation. This conserved structure, together with the observed dipolar shifts of numerous active site residue protons, allowed a quantitative determination of the orientation and anisotropies of the paramagnetic susceptibility tensor, both of which are only minimally perturbed relative to wild-type HRPCN. The quantitated dipolar shifts allowed the factoring of the hyperfine shifts to reveal that the significant changes in hyperfine shifts for the axial His and ligated (15)N-cyanide result primarily from changes in contact shifts that reflect an approximately one-third reduction in the axial His imidazolate character upon abolishing the distal hydrogen-bond to the ligated cyanide. Significant changes in side chain orientation were found for the distal Arg38, whose terminus reorients to partially fill the void left by the substituted His42 side chain. It is concluded that 1D/2D NMR can quantitate both molecular and electronic structural changes in cyanide-inhibited heme peroxidase and that, while both residues contribute, the proximal Asp247 is more important than the distal His42 in imparting imidazole character to the axial His 170.     

Mural inspection by vibration measurements with TV-holography

A commonly encountered problem in the conservation of historical murals is the identification of sections in the plaster that have detached from the wall and thus threaten to fall off. Commonly, walls are inspected by the acoustic response to a gentle finger-tapping (percussion method). Since this is a costly and cumbersome technique, means for a more automatic inspection are searched for. A TV-holography system of increased sensitivity in combination with acoustic excitation of the object is shown to be a new and powerful tool for monitoring of loose areas. It has the advantage of non-contact and remote operation which, for example, is extremely useful in large buildings. Principles of the method, experimental results obtained at an artificial wall in the laboratory, and a thorough comparison of results from historical sites gained by the traditional percussion method and the new technique are presented. The latter shows very good agreement in the assessment of wall quality and thus is evidence of the suitability of the optical equipment for tasks in conservation.     

Laser‐Induced Self‐Assembled Nanostructures on Electron‐Transparent Substrates

Currently, one of the challenges in high‐resolution transmission electron microscopy (TEM) studies of nanomaterials is to make contamination‐free materials in a simple and time‐efficient way. Here, a method is demonstrated that combines nanosecond‐pulsed laser dewetting of thin films with a film float‐off technique to realize nanostructures (NSs) on electron‐transparent substrates in a robust and rapid manner. NSs of metal (Ag) and bimetals (AgCo, AuCo) ranging from 20 to 150 nm are synthesized on thin carbon film deposited on mica substrates. The NS/carbon system is subsequently transferred onto TEM grids by a float‐off process resulting from debonding of the carbon from mica due to their contrasting hydrophobic nature. This process enables the fabrication of different NSs on flexible and electron‐transparent substrates.     

Towards a black‐box for biological EXAFS data analysis. II. Automatic BioXAS Refinement and Analysis (ABRA)

In biological systems, X‐ray absorption spectroscopy (XAS) can determine structural details of metal binding sites with high resolution. Here a method enabling an automated analysis of the corresponding EXAFS data is presented, utilizing in addition to least‐squares refinement the prior knowledge about structural details and important fit parameters. A metal binding motif is characterized by the type of donor atoms and their bond lengths. These fit results are compared by bond valance sum analysis and target distances with established structures of metal binding sites. Other parameters such as the Debye–Waller factor and shift of the Fermi energy provide further insights into the quality of a fit. The introduction of mathematical criteria, their combination and calibration allows an automated analysis of XAS data as demonstrated for a number of examples. This presents a starting point for future applications to all kinds of systems studied by XAS and allows the algorithm to be transferred to data analysis in other fields.     

New Cyclic and Polycyclic Ring Systems Containing Group 14 (Si,Ge, Sn) and 16 (S,Se, Te) Elements

The reactions of Me₂MCl₂ (M = Si, Ge, Sn), Si₂Me₄Cl₂, Si₂Me₂Cl₃, Si₂Me₂Cl₄ and CH₂(SiCl₂Me)₂, and suitable mixtures thereof, with H₂S / NEt₃ and Li₂E (E = Se, Te) have been investigated and lead to a variety of new group 14 chalcogenide systems.     

1,2- and 1,3-diphosphetanes from alkylidenephosphines

Abstract

Alkyl- or arylbis(trimethylsilyl)phosphines as well as tris(trimethylsilyl)phosphine and the corresponding arsines react with acyl chlorides to give [1-(trimethylsiloxy)alkylidene]phosphines 1 and -arsines 2; most of their 2,2-dimethylpropylidene derivatives are thermally stable at room temperature. With the same class of phosphines as starting compounds and carbon disulfide [bis(trimethylsilylsulfano)methylidene]phosphines 3 are formed, whereas [(dialkylamino)methylidene]-4 and [diarylmethylidene]phosphines 5 or the corresponding arsines 6 and 7 can be obtained from acyl amides or ketones.¹