Selective switching of individual multipole resonances in single dielectric nanoparticles

Following Mie theory, nanoparticles made of a high‐refractive‐index dielectric, such as silicon, exhibit a resonator‐like behavior and very rich resonance spectra. Which electric or magnetic particle mode is excited depends on the wavelength, the refractive‐index contrast relative to the environment, and the geometry of the nanoparticle itself. In addition, the spatial structure of the impinging light field plays a major role in the excitation of the nanoparticle resonances. Here, it is shown that, by tailoring the excitation field, individual multipole resonances can be selectively addressed while suppressing the excitation of other particle modes. This enables a detailed study of selected individual resonances without interference by the other modes.

     

Robust Design using classical optimization

The complexity of technical products increases significantly, due to an increasing number of interacting design variables of many components and subsystems. At the same time, the need for separated development processes is increasing due to specialization and outsourcing. Solution space methods are designed to solve this conflict. The requirements from an upper level, e.g. performance measures of the whole system, can be cascaded down to requirements on a lower level, e.g. performance measures of the subsystems or components, as it is done in the V-model approach. The method does not only take the numerous interactions into account but also guarantees the resulting intervals of different parameters to be independent of each other. Unfortunately, the computational cost of the state-of-the-art stochastic approach is high. The approach in this paper shows that the computational effort can be reduced considerably using a gradient based optimization approach for constraint problems. We demonstrate that the approach reduces the required number of function evaluations for a chassis design problem by a factor of 30, but more important, the CPU time for solving the problem by a factor of 20. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Heavy Alkali Metal Manganate Complexes: Synthesis,Structures and Solvent-Induced Dissociation Effects

Rare examples of heavier alkali metal manganates [{(AM)Mn(CH₂SiMe₃)(N^‘Ar)₂}_∞] (AM=K, Rb, or Cs) [N^‘Ar=N(SiMe₃)(Dipp), where Dipp=2,6-iPr₂-C₆H₃] have been synthesised with the Rb and Cs examples crystallographically characterised. These heaviest manganates crystallise as polymeric zig-zag chains propagated by AM⋅⋅⋅π-arene interactions. Key to their preparation is to avoid Lewis base donor solvents. In contrast, using multidentate nitrogen donors encourages ligand scrambling leading to redistribution of these bimetallic manganate compounds into their corresponding homometallic species as witnessed for the complete Li - Cs series. Adding to the few known crystallographically characterised unsolvated and solvated rubidium and caesium s-block metal amides, six new derivatives ([{AM(N^‘Ar)}_∞], [{AM(N^‘Ar)⋅TMEDA}_∞], and [{AM(N^‘Ar)⋅PMDETA}_∞] where AM=Rb or Cs) have been structurally authenticated. Utilising monodentate diethyl ether as a donor, it was also possible to isolate and crystallographically characterise sodium manganate [(Et₂O)₂Na(ⁿBu)Mn[(N^‘Ar)₂], a monomeric, dinuclear structure prevented from aggregating by two blocking ether ligands bound to sodium.     

Comprehensive Characterization of Shredded Lithium-Ion Battery Recycling Material

Herein we report on an analytical study of dry-shredded lithium-ion battery (LIB) materials with unknown composition. Samples from an industrial recycling process were analyzed concerning the elemental composition and (organic) compound speciation. Deep understanding of the base material for LIB recycling was obtained by identification and analysis of transition metal stoichiometry, current collector metals, base electrolyte and electrolyte additive residues, aging marker molecules and polymer binder fingerprints. For reversed engineering purposes, the main electrode and electrolyte chemistries were traced back to pristine materials. Furthermore, possible lifetime application and accompanied aging was evaluated based on target analysis on characteristic molecules described in literature. With this, the reported analytics provided precious information for value estimation of the undefined spent batteries and enabled tailored recycling process deliberations. The comprehensive feedstock characterization shown in this work paves the way for targeted process control in LIB recycling processes.     

Characterization of Functional Groups in Estuarine Dissolved Organic Matter by DNP-enhanced 15N and 13C Solid-State NMR

Estuaries are key ecosystems with unique biodiversity and are of high economic importance. Along the estuaries, variations in environmental parameters, such as salinity and light penetration, can modify the characteristics of dissolved organic matter (DOM). Nevertheless, there is still limited information about the atomic-level transformations of DOM in this ecosystem. Solid-state NMR spectroscopy provides unique insights into the nature of functional groups in DOM. A major limitation of this technique is its lack of sensivity, which results in experimental time of tens of hours for the acquisition of ¹³C NMR spectra and generally precludes the observation of ¹⁵N nuclei for DOM. We show here how the sensitivity of solid-state NMR experiments on DOM of Seine estuary can be enhanced using dynamic nuclear polarization (DNP) under magic-angle spinning. This technique allows the acquisition of ¹³C NMR spectra of these samples in few minutes, instead of hours for conventional solid-state NMR. Both conventional and DNP-enhanced ¹³C NMR spectra indicate that the ¹³C local environments in DOM are not strongly modified along the Seine estuary. Furthermore, the sensitivity gain provided by the DNP allows the detection of ¹⁵N NMR signal of DOM, in spite of the low nitrogen content. These spectra reveal that the majority of nitrogen is in the amide form in these DOM samples and show an increased disorder around these amide groups near the mouth of the Seine.     

Arene Ruthenium(II) Complexes Bearing the κ-P or κ-P,κ-S Ph2P(CH2)3SPh Ligand

Neutral [Ru(η⁶-arene)Cl₂{Ph₂P(CH₂)₃SPh-κP}] (arene = benzene, indane, 1,2,3,4-tetrahydronaphthalene: 2a, 2c and 2d) and cationic [Ru(η⁶-arene)Cl(Ph₂P(CH₂)₃SPh-κP,κS)]X complexes (arene = mesitylene, 1,4-dihydronaphthalene; X = Cl: 3b, 3e; arene = benzene, mesitylene, indane, 1,2,3,4-tetrahydronaphthalene, and 1,4-dihydronaphthalene; X = PF₆: 4a–4e) complexes were prepared and characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy and also by single-crystal X-ray diffraction analyses. The stability of the complexes has been investigated in DMSO. Complexes have been assessed for their cytotoxic activity against 518A2, 8505C, A253, MCF-7 and SW480 cell lines. Generally, complexes exhibited activity in the lower micromolar range; moreover, they are found to be more active than cisplatin. For the most active ruthenium(II) complex, 4b, bearing mesitylene as ligand, the mechanism of action against 8505C cisplatin resistant cell line was determined. Complex 4b induced apoptosis accompanied by caspase activation.     

Excitation dependent quenching of luminescence in LED phosphors

Droop, the decrease of efficiency with increased power density, became a major topic with InGaN LEDs, after its introduction in 2007. This paper provides insight into droop in localized center luminescence phosphors, exemplified here by Eu²⁺ doped materials. This topic is of increasing importance, as high brightness blue LEDs have reached outputs >1 W/mm². The nonlinearities in phosphor quantum efficiency result in drive‐dependent color point shift and reduction of overall efficiency of phosphor converted white LEDs which utilize Eu²⁺ activated phosphors. The efficiency quenching can be traced back to two processes, well‐known in laser physics, excited state absorption or/and cross relaxation by Foerster/Dexter transfer. Both processes lead to reduction in phosphor efficiency, but they can be differentiated. Understanding the root cause of efficiency quenching opens ways to minimize the practical consequences. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Electronic excitation energy transfer between two single molecules embedded in a polymer host

Unidirectional electronic excitation energy transfer from a photoexcited donor chromophore to a ground state acceptor chromophore - both linked by a rigid bridge - has been investigated by low temperature high-resolution single molecule spectroscopy. Our approach allows for accurately accessing static disorder in the donor and acceptor electronic transitions and to calculate the spectral overlap for each couple. By plotting the experimentally determined transfer rates against the spectral overlap, we can distinguish and quantify F?rster- and non-F?rster-type contributions to the energy transfer.     

A survey of electrokinetically-driven microfluidics for cancer cells manipulation

Cancer is one of the leading causes of annual deaths worldwide, accounting for nearly 10 million deaths each year. Metastasis, the process by which cancer spreads across the patient's body, is the main cause of death in cancer patients. Because the rising trend observed in statistics of new cancer cases and cancer-related deaths does not allow for an optimistic viewpoint on the future—in relation to this terrible disease—the scientific community has sought methods to enable early detection of cancer and prevent the apparition of metastatic tumors. One such method is known as liquid biopsy, wherein a sample is taken from a bodily fluid and analyzed for the presence of CTCs or other cancer biomarkers (e.g., growth factors). With this objective, interest is growing by year in electrokinetically-driven microfluidics applied for the concentration, capture, filtration, transportation, and characterization of CTCs. Electrokinetic techniques—electrophoresis, dielectrophoresis, electrorotation, and electrothermal and EOF—have great potential for miniaturization and integration with electronic instrumentation for the development of point-of-care devices, which can become a tool for early cancer diagnostics and for the design of personalized therapeutics. In this contribution, we review the state of the art of electrokinetically-driven microfluidics for cancer cells manipulation.     

Stable and Storable N(CF3)2 Transfer Reagents

Fluorinated groups are essential for drug design, agrochemicals, and materials science. The bis(trifluoromethyl)amino group is an example of a stable group that has a high potential. While the number of molecules containing perfluoroalkyl, perfluoroalkoxy, and other fluorinated groups is steadily increasing, examples with the N(CF₃)₂ group are rare. One reason is that transfer reagents are scarce and metal-based storable reagents are unknown. Herein, a set of Cu^I and Ag^I bis(trifluoromethyl)amido complexes stabilized by N- and P-donor ligands with unprecedented stability are presented. The complexes are stable solids that can even be manipulated in air for a short time. They are bis(trifluoromethyl)amination reagents as shown by nucleophilic substitution and Sandmeyer reactions. In addition to a series of benzylbis(trifluoromethyl)amines, 2-bis(trifluoromethyl)amino acetate was obtained, which, upon hydrolysis, gives the fluorinated amino acid N,N-bis(trifluoromethyl)glycine.