Die quantitative Bestimmung von Vanadin mittels aktivierter Katalyse

Zusammenfassung Es wurden zwei Verfahren ausgearbeitet, um Vanadin mit Hilfe von aktivierter Katalyse zu bestimmen. Die Methodik ist geeignet, kleinste Spuren von Vanadin (bis herab zu 0,0006) mit ausreichender Genauigkeit zu ermitteln. Es werden Beleganalysen mitgeteilt.

---

Summary Two procedures for the determination of vanadium have been worked out, based on activated catalysis, which allow minimal traces (down to 0,0006) of vanadium to be determined with adequate accuracy. Comparison analyses are given in the paper.

---

Résumé On a élaboré deux procédés pour exécuter le dosage du vanadium à l'aide d'une catalyse activée. La méthode est apte à la détermination des plus petites traces de vanadium (jusqu'à 0,0006) avec une précision suffisante. On communique des analyses documentaires.

     

Untersuchung der thermischen Eigenschaften von Alkalibenzolsulfonaten

Zusammenfassung Der Einfluß von Atmosphäre, Aufheizungsgeschwindigkeit und Spülgasgeschwindigkeit auf die thermische Zersetzung von Alkalibenzolsulfonaten wurde untersucht. Kristallwassergehalt, Dehydratations-temperatur und -wärme, gegebenenfalls die Zusammensetzung, Art, Temperatur und Wärme der Modifikationsänderungen, Schmelzpunkte und Schmelzwärmen der Verbindungen wurden bestimmt. Die Zersetzung verläuft in zwei Abschnitten. In dem ersten Hauptteil entstehen in Inertgasatmosphäre Diphenyloxid, Diphenyl, Diphenylsulfon, Benzol, Phenol, Thiophenol, Diphenylsulfid, Thiantren, Diphenylenoxid und wahrscheinlich Diphenylensulfid, weiterhin Koks, Schwefeldioxid, Natriumsulfit und wenig Natriumsulfat, Natriumsulfid, Acetylen und Wasser. Im zweiten Hauptzersetzungsvorgang entstehen Natriumsulfid und Kohlenoxid. Die Produkte wurden isoliert und analysiert. Dazu wurden Derivatographie, Differentialthermoanalyse, Gaschromatographie, Infrarotspektroskopie, kontinuierliche thermische Titration und chemische Methoden gemeinsam angewandt.

---

Summary An investigation was made of the influence of the atmosphere, rate of temperature rise, and velocity of the purging gas on the thermal decomposition of alkali benzene sulfonates. The crystal water content, the dehydration temperature and heat, and if need be the composition, the kind, temperature, and heat of the modification changes, melting points and heats of fusion of the compounds, were determined. The decomposition proceeds in two stages. In the first main stage (in an inert atmosphere) the resulting compounds include diphenyl oxide, diphenyl, diphenylsulfone, benzene, phenol, thiophenol, diphenyl sulfide, thianthrene, diphenylene oxide and probably diphenylene sulfide; also coke, sulfur dioxide, sodium sulfite and a little sodium sulfate, sodium sulfide, acetylene, water. Sodium sulfide and carbon monoxide are formed in the second main decomposition. The products were isolated and analyzed. Furthermore, use was made of derivatography, differential thermal analysis, gas chromatography, infra red spectroscopy, continuous thermal titration, and chemical methods.

---

Résumé On a étudié l'influence de l'atmosphère, de la vitesse d'échauffement et de balayage du gaz, sur la décomposition thermique des benzène-sulfonates alcalins. On a déterminé la teneur en eau de cristallisation, la température et la chaleur de déshydratation, éventuellement la composition, la nature, la température et la chaleur des changements d'état, les points de fusion et les chaleurs de fusion des composés. La décomposition s'effectue en deux temps. Tout d'abord, en atmosphère inerte, il se forme de l'oxyde de diphényle, du diphényle, de la diphénylsulfone, du benzène, du phénol, du thiophénol, du sulfure de diphényle, du thianthrène, de l'oxyde de diphénylène et probablement du sulfure de diphénylène, et aussi du coke, de l'anhydride sulfureux, du sulfite de sodium et, en moins grande quantité, du sulfate de sodium, du sulfure de sodium, de l'acétylène et de l'eau. Dans une deuxième étape de la décomposition principale, du sulfure de sodium et de l'oxyde de carbone prennent naissance. On a isolé et analysé ces produits. Pour cela, on a utilisé simultanément la dérivatographie, l'analyse thermique différentielle, la chromatographie en phase gazeuse, la spectroscopie infrarouge, le titrage thermique en continu et les méthodes chimiques.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

1,4 Addition to a perfluorinated cross-conjugated triene

Conclusions Perfluoro-(2-isobutenyl-1,1,4,4-tetramethyl-1,3-butadiene) yields 1,4 addition products both in nucleophilic addition and in radical chlorination.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1061–1064, May, 1979.     

Thermal degradation of copolymers of styrene and methyl-vinyl-silane by pyrolysis gas chromatography

Pyrolysis gas chromatographic investigations have been carried out on copolymers of styrene with trimethyl-vinyl-silane and of styrene with dimethyl-phenyl-vinyl-silane, in order to study the mechansims of thermal degradation and the copolymer structures. We have identified the pyrolysis products and measured their relative amounts. The experiments show that the controlling factor in the mechanism of the degradation is the nature of the side-group attached to the carbon atom at which chain scission occurs. If this side-group is phenyl, the main degradation process is depropagation; if it is if it is trimethyl-silyl or dimethyl-phenyl-silyl, intramolecular hydrogen abstraction followed by β scission becomes more important than depropagation. From the point of view of degradation mechanism, the nature of the side-group attached to the carbon atom from which the hydrogen is abstracted is of minor importance.We estimated the average copolymer block length from the amounts of products containing both comonomers as well as from the amounts of trimer composed of the same monomer.     

Vapor-particle partitioning of hydrocarbons in Western Mediterranean urban and marine atmospheres

An analytical procedure is described for a comprehensive determination of the composition of hydrocarbons in the atmosphere, based on: (a) aerosol filtration and subsequent adsorption of the vapor phase onto active charcoal and polyurethane foam; (b) GPC and HPLC fractionation of the extracts, and (c) analysis of the fractions by GC-MS under EI and NICI modes. Special emphasis is placed onn-alkanes, PAHs and their oxygenated derivatives.The characterization of samples collected in a coastal urban area (Barcelona city), and far away over the Western Mediterranean, at sea level and at 1100 m of altitude, revealed significant changes in the aerosol composition, mainly attributed to initial vapor-particle partitioning processes, influenced by ambient temperature variations, and to others taking place during long-range atmospheric transport, related with the different compound photoreactivities and with an unexplained source-decoupling phenomenon.     

Molybdenum(VI) and molybdenum(V) mononuclear and dinuclear complexes with 1,3-diphenyl-1,3-propanedione

Summary The synthesis and the dinuclear or mononuclear nature of several molybdenum(VI) and molybdenum(V) oxocomplexes derived from 1,3-diphenyl-1,3-propanedione (HLL) are described. These complexes were identified by i.r. and electronic spectra, magnetic susceptibility and analytical data, and are assigned the following formulae: [MoO₂(LL)₂], [Mo₂O₅(LL)₂], [Mo₂O₄(LL)₂], [MoOCl(LL)₂], [MoCl₂(LL)] and [MoO(OH)(LL)₂)]. The low magnetic moments of the dinuclear complexes are due, in part, to intramolecular interactions. The i.r. data show that the dionate is bound by two oxygen atoms forming a chelate six-membered ring.     

A theoretical study of the structure and bonding of UOX4 (X = F, Cl, Br, I) molecules: the importance of inverse trans influence.

During nitroxide-mediated polymerization (NMP) in the presence of a nitroxide R2(R1)NO*, the reversible formation of N-alkoxyamines [P-ON(R1)R2] reduces significantly the concentration of polymer radicals (P*) and their involvement in termination reactions. The control of the livingness and polydispersity of the resulting polymer depends strongly on the magnitude of the bond dissociation energy (BDE) of the C-ON(R1)R2 bond. In this study, theoretical BDEs of a large series of model N-alkoxyamines are calculated with the PM3 method. In order to provide a predictive tool, correlations between the calculated BDEs and the cleavage temperature (T(c)), and the dissociation rate constant (k(d)), of the N-alkoxyamines are established. The homolytic cleavage of the N-OC bond is also investigated at the B3P86/6-311++G(d,p)//B3LYP/6-31G(d), level. Furthermore, a natural bond orbital analysis is carried out for some N-alkoxyamines with a O-C-ON(R1)R2 fragment, and the strengthening of their C-ON(R1)R2 bond is interpreted in terms of stabilizing anomeric interactions.     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table