Synthesis of 4-trifluoromethylpyrido[1,2-a]pyrimidin-2-ones utilizing activated alkynoates

The synthesis of the biologically relevant, 4-trifluoromethylpyrido[1,2-a]pyrimidin-2-one 7, is reported. Addition of substituted 2-aminopyridines 5 to activated alkynoates leads to the facile formation of a series of metabolically stable trifluoromethyl substituted pyrido[1,2-a]pyrimidines under mild conditions.     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

Sono-electroanalysis of copper: enhanced detection and determination in the presence of surfactants

Surfactant adsorption has been shown to have a passivating effect on the electrode surface during anodic stripping voltammetric measurements. In the present work the feasibility of sono-anodic stripping analysis for the determination of copper in aqueous media contaminated with surfactant has been studied at an unmodified bare glassy carbon electrode. We illustrate the deleterious effect of three common surfactants, sodium dodecyl sulfate (SDS), dodecyl pyridinium chloride (DPC) and Triton-X 100 (TX-100) on conventional electroanalysis. The analogous sono-electroanalytical response was investigated for each surfactant at ultrasound intensities above and below the cavitation threshold. The enhancement in the stripping signal observed is attributed to the increased mass transport due to acoustic streaming and above the cavitation threshold the intensity of cavitational events is significantly increased leading to shearing of adsorbed surfactant molecules from the surface. As a result accurate analyses for SDS concentrations up to 100 ppm are possible, with analytical signals visible in solutions of SDS and TX-100 of 1000 ppm. Analysis is reported in high concentration of surfactant with use of sono-solvent double extraction. The power of this technique is clearly illustrated by the ability to obtain accurate measurements of copper concentration from starting solutions containing 1000 ppm SDS or TX-100. This was also exemplified by analysis of the low concentration 0.3 microM Cu(II) solution giving a percentage recovery of 94% in the presence of 1000 ppm SDS or TX-100.     

Adsorption of organosulfur species at aqueous surfaces: molecular bonding and orientation

Four sulfur-containing compounds important to tropospheric chemistry have been examined at the vapor/H2O and vapor/D2O interfaces. These adsorbates, DMS, DMSO, DMSO2, and DMSO3, were studied by surface tension and vibrational sum-frequency spectroscopy (VSFS). Each adsorbate is surface active and each orients with the hydrophobic methyl groups pointed out of the plane of the interface. Their influence on the interfacial water structure is adsorbate dependent. Strong and weak interactions with surface water are observed as well as reorientation of subsurface water molecules, resulting in an increase in interfacial thickness.     

Confirmatory analysis of non-steroidal anti-inflammatory drugs in bovine milk by high-performance liquid chromatography with fluorescence detection

HPLC with fluorescence detection is considered for confirmatory analysis of group B veterinary drugs by the European Union legislation. A procedure for confirming the presence of anti-inflammatory non-steroidal drug (NSAID) residues in bovine milk by reversed phase high-performance liquid chromatography with fluorescence detection is herein described. The native fluorescence of nine drugs belonging to different NSAID sub-classes, namely flurbiprofen, carprofen, naproxen, vedaprofen, 5-hydroxy-flunixin, niflumic acid, mefenamic acid, meclofenamic acid and tolfenamic acid, allowed for detection in bovine milk down to 0.25–20.0 μg/kg. Confirmation of the nine NSAIDs is attained by fluorescence detection at characteristic excitation and emission wavelengths. The procedure described is simple and selective. Limits of quantification (LOQs) ranging between 0.25 and 20 μg/kg were measured; satisfactory trueness and within-laboratory reproducibility data were calculated at LOQ spiking levels, apart from 5-hydroxy-flunixin. The procedure developed is used in our laboratory for confirmation of each one of the above mentioned NSAIDs in bovine milk, to support results after HPLC quantitative analysis with UV–vis detection.     

A hybrid liquid chromatography–mass spectrometry strategy in a forensic laboratory for opioid,cocaine and amphetamine classes in human urine using a hybrid linear ion trap-triple quadrupole mass spectrometer

A rapid method has been developed to analyse morphine, codeine, morphine-3-glucuronide, 6-monoacetylmorphine, cocaine, benzoylegonine, buprenorphine, dihydrocodeine, cocaethylene, 3,4-methylenedioxyamphetamine, ketamine, 3,4-methylenedioxymethamphetamine, pseudoephedrine, lignocaine, benzylpiperazine, methamphetamine, amphetamine, 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine and methadone in human urine. Urine samples were diluted with methanol:water (1:1, v/v) and sample aliquots were analysed by hybrid linear ion trap-triple quadrupole mass spectrometry with a runtime of 12.5 min. Multiple reaction monitoring (MRM) as survey scan and an enhanced product ion (EPI) scan as dependent scan were performed in an information-dependent acquisition (IDA) experiment. Finally, drug identification and confirmation was carried out by library search with a developed in-house MS/MS library based on EPI spectra at a collision energy spread of 35 ± 15 in positive mode and MRM ratios. The method was validated in urine, according to the criteria defined in Commission Decision 2002/657/EC. At least two MRM transitions for each substance were monitored in addition to EPI spectra and deuterated analytes were used as internal standards for quantitation. The reporting level was 0.05 μg mL⁻¹ for the range of analytes tested. The regression coefficients (r²) for the calibration curves (0–4 μg mL⁻¹) in the study were ≥0.98. The method proved to be simple and time efficient and was implemented as an analytical strategy for the illicit drug monitoring of opioids, cocaines and amphetamines in criminal samples from crime offenders, abusers or victims in the Republic of Ireland. To the best of our knowledge there are no hybrid LC–MS applications using MRM mode and product ion spectra in the linear ion trap mode for opioids, cocaines or amphetamines with validation data in urine.     

Evaluation of diffusive gradients in thin-films using a Diphonix resin for monitoring dissolved uranium in natural waters

Commercially available Diphonix^® resin (TrisKem International) was evaluated as a receiving phase for use with the diffusive gradients in thin-films (DGT) passive sampler for measuring uranium. This resin has a high partition coefficient for actinides and is used in the nuclear industry. Other resins used as receiving phases with DGT for measuring uranium have been prone to saturation and significant chemical interferences. The performance of the device was evaluated in the laboratory and in field trials. In laboratory experiments uptake of uranium (all 100% efficiency) by the resin was unaffected by varying pH (4–9), ionic strength (0.01–1.00 M, as NaNO₃) and varying aqueous concentrations of Ca²⁺ (100–500 mg L⁻¹) and HCO₃⁻ (100–500 mg L⁻¹). Due to the high partition coefficient of Diphonex^®, several elution techniques for uranium were evaluated. The optimal eluent mixture was 1 M NaOH/1 M H₂O₂, eluting 90% of the uranium from the resin. Uptake of uranium was linear (R² = 0.99) over time (5 days) in laboratory experiments using artificial freshwater showing no saturation effects of the resin. In field deployments (River Lambourn, UK) the devices quantitatively accumulated uranium for up to 7 days. In both studies uptake of uranium matched that theoretically predicted for the DGT. Similar experiments in seawater did not follow the DGT theoretical uptake and the Diphonix^® appeared to be capacity limited and also affected by matrix interferences. Isotopes of uranium (U²³⁵/U²³⁸) were measured in both environments with a precision and accuracy of 1.6–2.2% and 1.2–1.4%, respectively. This initial study shows the potential of using Diphonix^®-DGT for monitoring of uranium in the aquatic environment.     

Partial-filling affinity capillary electrophoresis and quartz crystal microbalance with adsorption energy distribution calculations in the study of biomolecular interactions with apolipoprotein E as interaction partner

Adsorption energy distribution (AED) calculations were successfully applied to partial-filling affinity capillary electrophoresis (PF-ACE) to facilitate more detailed studies of biomolecular interactions. PF-ACE with AED calculations was employed to study the interactions between two isoforms of apolipoprotein E (apoE) and dermatan sulfate (DS), and a quartz crystal microbalance (QCM) was used in combination with AED calculations to examine the interactions of the 15-amino-acid peptide fragment of apoE with DS. The heterogeneity of the interactions was elucidated. Microscale thermophoresis was used to validate the results. The interactions studied are of interest because, in vivo, apolipoprotein E localizes on DS-containing regions in the extracellular matrix of human vascular subendothelium. Two-site binding was demonstrated for the isoform apoE3 and DS, but only one-site binding for apoE2–DS. Comparable affinity constants were obtained for the apoE2–DS, apoE3–D3, and 15-amino-acid peptide of apoE–DS using the three techniques. The results show that combining AED calculations with modern biosensing techniques can open up another dimension in studies on the heterogeneity and affinity constants of biological molecules.     

Microengineered physiological biomimicry: organs-on-chips

Microscale engineering technologies provide unprecedented opportunities to create cell culture microenvironments that go beyond current three-dimensional in vitro models by recapitulating the critical tissue-tissue interfaces, spatiotemporal chemical gradients, and dynamic mechanical microenvironments of living organs. Here we review recent advances in this field made over the past two years that are focused on the development of 'Organs-on-Chips' in which living cells are cultured within microfluidic devices that have been microengineered to reconstitute tissue arrangements observed in living organs in order to study physiology in an organ-specific context and to develop specialized in vitro disease models. We discuss the potential of organs-on-chips as alternatives to conventional cell culture models and animal testing for pharmaceutical and toxicology applications. We also explore challenges that lie ahead if this field is to fulfil its promise to transform the future of drug development and chemical safety testing.     

Preparation and Characterization of PVA Hidrogels Nanofibers

Summary: Poly(vinyl alcohol) (PVA) is a biomaterial that has interesting features for applications in soft tissue replacement due to its similarities in the mechanical properties of such tissues. This paper describes the preparation and characterization of PVA fibers obtained by electrospinning and crosslinked with potassium persulfate as thermoinitiator. These PVA fibers were characterized by Scanning Electron Microscopy (SEM) and Optical Microscopy (OM) to analyze the morphology of the spun samples. Finally, Fourier Transform Infrared Spectroscopy (FTIR) and differential scanning calorimetry (DSC) were performed and the results showed that the biomaterial was partially cross-linked, which indicates a potential use for dermal regeneration applications. The morphology of the fibers indicated that structural changes occurred in the biomaterial after thermal crosslinking.