Induced and photoinduced DNA damage by quinolones: ciprofloxacin, ofloxacin and nalidixic acid determined by comet assay

Quinolones are degraded by light with loss of their antimicrobial activity, generating active species or radicals. Evidence exists that some fluoroquinolones (lomefloxacin, fleroxacin and enoxacin) induce damage to the cellular membrane and DNA cleavage by photosensitization. In this study, the genotoxic potential of the quinolones ofloxacin, nalidixic acid and ciprofloxacin (three antimicrobials frequently used in therapy) was evaluated upon irradiation with UV light by using the comet assay on cells of the Jurkat line. The results demonstrate that there are significant differences between the control groups (positive control with 50 microM H2O2, negative controls without drug and with and without irradiation) and the groups of irradiated quinolones (ofloxacin 2.76 x 10(-5) M, nalidixic acid 2.15 x 10(-4) M and ciprofloxacin 2.01 x 10(-5) M), indicating that, at the dose of irradiation employed (necessary to produce 50% photodegradation), the photodecomposition of the quinolones enhanced DNA damage. The unirradiated drugs also exhibited genotoxicity significantly different from that of the negative control.     

Isolation of a new two-dimensional honeycomb carbonato-bridged copper(II) complex exhibiting long-range ferromagnetic ordering

Atmospheric CO2 fixation by an aqueous solution containing Cu(ClO4)2.6H2O and 4-aminopyridine (4-apy) yields a novel example of a two-dimensional mu3-CO3 bridged copper(II) complex {[Cu(4-apy)2]3(mu3-CO3)2(ClO4)2.(1/2)CH3OH}n that has been characterized by IR, UV and X-ray crystallography; preliminary magnetic measurements show that complex exhibits long-range ordered ferromagnetic coupling.     

Intra- vs intermolecular hydrogen bonding. The crystal structure of 5-methyl-2-hydroxyacetophenone thiosemicarbazone monohydrate and salicylaldehyde-2-methylthiosemicarbazone monohydrate

The crystal structure of 5-methyl-acetophenonethiosemicarbazone monohydrate,A, and salicylaldehyde-2-methylthiosemicarbazone monohydrate,B, were determined using single crystal X-ray diffraction.A crystallizes in the monoclinic space groupC2/c, with lattice parametersa=14.161(2),b=15.753(1) Å,c=11.084(1) Å, β=112.59(1)° andZ=4, yielding a calculated density ofD _calc=1.352 mg/m³.B crystallizes in the triclinic space groupP1, witha=7.233(2) Å,b=7.371(2) Å,c=11.841(2) Å, α=82.77(2)°, β=78.33(2)°, γ=63.06(2)° andD _calc=1.371 mg/m³ forZ=2,. In bothA andB the immine nitrogen and the sulfur atom areanti with respect to N2-C8. WhileA presents the usual intramolecular six membered hydrogen bond ring,B has instead an intermolecular hydrogen bond between the hydroxy moiety of the salicyladehyde and a water molecule. AM1 calculations agree with the experimental conformations observed in both compounds.     

C.I. Pigment Red 266

C.I. Pigment Red 266, or 4‐{[4‐(amino­carbonyl)­phenyl]­hydraz­ono}‐N‐(2‐methoxy­phenyl)‐3‐oxo‐3,4‐di­hydro­naph­tha­l­ene‐2‐carbox­amide, C₂₅H₂₀N₄O₄, adopts the keto–hydrazone tautomeric form with significant intramolecular hydrogen bonding. The mol­ecules pack to form layers involving an extensive network of intermolecular hydrogen bonds, in which the primary amide group plays a prominent role. The good technical performance of this pigment in application may be attributed principally to the pattern of intra‐ and intermolecular hydrogen bonding.     

Applied biological and physicochemical activity of isoquinoline alkaloids: oxoisoaporphine and boldine

The aim of this study was to determine the electronic influence of substituent groups and annelated rings such as oxazole-oxazinone on the physicochemical and photoprotection, antioxidant capacity, toxicity and singlet oxygen photosensitization biological properties of isoquinoline alkaloid frameworks. Thus, oxoisoaporphine derivatives 1-5 and 3-azaoxoisoaporphine (6), some of them with phenolic structures, did not present any antioxidant capacity, possibly either by formation of keto-enol tautomerism species or the formation of unstable free radicals. Due to the singlet oxygen quantum yields (F_D) near to unity, and greater photostability than phenalenone, oxoisoaporphines 4-6 may be considered as photosensitizers for singlet oxygen production and can be used as new universal study tools. The biological application as antibacterial agents is an important and possible tool in the study of compounds with low cytotoxicity and high reactivity in antineoplastic chemotherapy. On the other hand, when boldine and its annelated derivatives B1-4 are irradiated, a photoprotector effect is observed (SPF = 2.35), even after 30 minutes of irradiation. They also act as photoprotectors in cell fibroblast cultures. No hemolysis was detected for boldine hydrochloride and its salts without irradiation. In solutions irradiated before incubation (at concentrations over 200 ppm) photoproducts were toxic to the nauplii of Artemia salina.     

Simultaneous electrochemical determination of arsenic, copper, lead and mercury in unpolluted fresh waters using a vibrating gold microwire electrode

In this work, a simple, rapid, reliable and low cost method for simultaneous electrochemical determination of As, Cu, Hg and Pb ions, on a vibrating gold microwire electrode combined with stripping voltammetry, is described for the first time.The multi-element detection was performed in the presence of oxygen by differential pulse anodic stripping voltammetry (DPASV) in HCl 0.1 M with NaCl 0.5 M. This media was found optimum in terms of peak resolution, peak shape and sensitivities, and has a composition similar to seawater to which the method could potentially be applied. The gold microwire electrode presented well defined, undistorted, sharp and reproducible peaks for trace concentrations of Cu, Hg and Pb and As presented a reproducible peak with a small shoulder. Using a gold vibrating microwire electrode of 25 μm diameter and 30 s deposition time, the detection limits of As, Cu, Hg and Pb were 0.07, 0.4, 0.07 and 0.2 μg L⁻¹, respectively. Possible effects of Al, Cd, Cr, Fe, Mn, Ni, Sb and Zn were investigated but did not cause any significant interferences.Finally, the method was applied for the simultaneous determination of these four metals in unpolluted river water samples and the results were validated by Atomic Absorption Spectroscopy with Electrothermal Atomization (AAS-EA) or by Inductively Coupled Plasma Mass Spectrometry (ICP-MS).     

On-line species-unspecific isotope dilution analysis in the picomolar range reveals the time- and species-depending mercury uptake in human astrocytes

In order to reveal the time-depending mercury species uptake by human astrocytes, a novel approach for total mercury analysis is presented, which uses an accelerated sample introduction system combined on-line with an inductively coupled plasma mass spectrometer equipped with a collision/reaction cell. Human astrocyte samples were incubated with inorganic mercury (HgCl₂), methylmercury chloride (MeHgCl), and thimerosal. After 1-h incubation with Hg²⁺, cellular concentrations of 3 μM were obtained, whereas for organic species, concentrations of 14–18 μM could be found. After 24 h, a cellular accumulation factor of 0.3 was observed for the cells incubated with Hg²⁺, whereas the organic species both showed values of about 5. Due to the obtained steady-state signals, reliable results with relative standard deviations of well below 5 % and limits of detection in the concentration range of 1 ng L^?1 were obtained using external calibration and species-unspecific isotope dilution analysis approaches. The results were further validated using atomic fluorescence spectrometry.

New 13-vertex metallacarborane sandwich compounds; synthetic and structural studies

Reduction of 1,12-closo-C2B10H12 followed by reaction with the appropriate metal halide and metathesis with either [K(18-crown-6)]Br or [BTMA]Cl ([BTMA] = [C6H5CH2N(CH3)3]+) affords isolable salts of the supraicosahedral metallacarborane sandwich anions [4,4-M-(1,10-closo-C2B10H12)2]n- in moderate to good yield. Compounds prepared are [BTMA][4,4-Co-(1,10-closo-C2B10H12)2] ( 1), [K(18-crown-6)][4,4-Co-(1,10-closo-C2B10H12)2] ( 2), [K(18-crown-6)]2[4,4-Ni-(1,10-closo-C2B10H12)2] ( 3), [K(18-crown-6)]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 4), [BTMA]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 5) and [K(18-crown-6)]2[4,4-Ti-(1,10-closo-C2B10H12)2] ( 6). Oxidation of the iron(II) species 4 and 5 with FeCl3 in THF generates the iron(III) analogues [K(18-crown-6)][4,4-Fe-(1,10-closo-C2B10H12)2] ( 7) and [BTMA][4,4-Fe-(1,10-closo-C2B10H12)2] ( 8), respectively. All diamagnetic compounds were characterised spectroscopically and the structures of 1, 3, 4, 6, 7 and 8 were established by single crystal X-ray diffraction. All anions have the anticipated cluster structures with two docosahedral 13-vertex cages joined at the central metal atom (the common degree-six vertex 4). Carbon atoms occupy the degree-four vertex 1 and the degree-five vertex 10. 11B NMR spectroscopy suggests the anions have, on the NMR timescale, C2h symmetry in solution at room temperature, consistent with free rotation, or at least substantial libration, of cage units about the long molecular axis. In the solid state the relative conformations of the two cages may be rationalised by simple bonding arguments, the single exception being the conformation of 4, in which both cages are subject to directional B-H...K+ interactions to the [K(18-crown-6)]+ counterion. The salts 3, 6 and 7 also show B-H...K+ interactions but involving one cage only.     

Formal total synthesis of salicylihalamides A and B

An efficient synthesis of the macrolactone 3 of the salicylihalamides in 10 linear steps from alkene 6 is described. The key steps involved a Stille coupling between the chiral stannane 5 and benzyl bromide 4, which produced alkene 15 in good yield, and subsequent base-induced macrolactonization then gave compound 3. Macrolactone 3 was then converted into the known salicylihalamide A intermediate 18 in a three-step sequence. Compound 3 was also converted into another known salicylihalamide A and B intermediate 23 in a five-step sequence.     

Modelling and Optimization of Stability Constants of Cadmium or Zinc with Biological Buffers (DIPSO or TAPS) in Aqueous Solutions by Electrochemical Techniques

The complexation behavior of four systems involving cadmium(II) or zinc(II) in aqueous solutions with the biological buffers 3-[N,N-bis(2-hydroxyethyl)amino]-2-hydroxypropanesulfonic acid (DIPSO), and [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS) was studied by direct current polarography (DCP) and glass electrode potentiometry (GEP), at 25.0 ± 0.1 °C and ionic strength 0.1 mol·dm^?3 KNO₃. Except for the Cd–TAPS system, for which full characterization of the system was possible either by DCP or GEP, full characterization of the other metal-buffer systems (Zn–DIPSO, Zn–TAPS and Cd–DIPSO) was only possible using DCP. For Zn-buffers systems, ZnL⁺ and $ {\text{ZnL(OH)}}_{2}^{ - } $ ZnL(OH) 2 ? (where L stands for buffer) were identified. For the Zn–DIPSO system, the overall stability constant values (as log₁₀ β) are 2.1 ± 0.2 and 13.4 ± 0.2, respectively. For the Zn–TAPS system, the overall stability constants values (as log₁₀ β) are 2.4 ± 0.1 and 12.9 ± 0.3, respectively. For the Cd–DIPSO system, the overall stability constants values (as log₁₀ β) of CdL⁺ and CdL(OH) are 2.9 ± 0.1 and 6.9 ± 0.3, respectively. For the Cd–TAPS system, only the species CdL⁺ was identified with log₁₀ β = 2.5 ± 0.1.