NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Versatile solid-phase synthesis of secondary amines from alcohols. Development of an N-Boc-(o-nitrobenzene)sulfonamide linker

The development of a versatile amine releasing linker based on the modified o-nitrobenzene sulfonamide protective group is described. This new N-Boc-o-nitrobenzenesulfonamide (Boc-ONBS) linker enables the elaboration on resin of primary and secondary amines by sequential substitution of the sulfonamide moiety using the Mitsunobu reaction. A 16-member array of secondary and Boc protected primary amines was then prepared using this linker.     

Synthesis of an asymmetrical tripodal tetraamine ligand and its five-coordinate copper(II) complex

A simple synthesis has been devised for the tripodal 3,3,4-tetraamine ligand N{(CH2)3NH2}2{(CH2)4NH2} (L). This ligand forms a copper(II) complex, [Cu (LH)Cl2]ClO4 (7), the structure of which has been determined by X-ray diffraction. The cation contains a five-coordinate copper atom, bonded to two chloride ions, the two propylamine groups and the tertiary nitrogen atom of the ligand; the arrangement is a distorted trigonal bipyramid, in which the two primary amine groups occupy the axial positions. The butylamine group of the ligand does not coordinate to copper but is protonated. It is involved in hydrogen bonding to the perchlorate ion. The e.p.r. spectrum of [Cu(dpt)Cl2] is very similar to that of (7), suggesting that it also has a trigonal bipyramidal structure. This revised version was published online in June 2006 with corrections to the Cover Date.     

Biaxial nematics: computer simulation studies of a generic rod-disc dimer model

One possible route to the elusive biaxial nematic phase is through rod-disc dimers in which the rod and disc mesogenic units are linked via a flexible spacer. We have developed a continuous generic model of such rod-disc dimers in which neighbouring like groups tend to align parallel to each other while unlike groups tend to be orthogonal. A torsional potential controls the relative orientations of the groups within a single dimer; depending on the strength of the torsional potential, the groups may be orthogonal or parallel in the conformational ground state. Monte Carlo simulations show that a rigid rod-disc dimer is most likely to form a biaxial nematic phase if the anisotropies of the two groups are the same. Introduction of flexibility is found to have little effect on the qualitative behaviour of the dimer as the relative anisotropy of the two mesogenic groups is changed. However, when the torsional potential strongly favours the alignment of the rod and disc within a single molecule with their symmetry axes parallel there is a dramatic change. The system then exhibits a strong hysteresis in the molecular shape and biaxiality and the biaxial nematic-isotropic transition becomes strongly first order, in marked contrast to the second-order character usually found for this transition. This first-order transition is observed to occur for a range of relative anisotropies of the two groups rather than at a single point.     

Amino acid analysis by micellar electrokinetic chromatography with laser-induced fluorescence detection: application to nanolitre-volume biological samples from Arabidopsis thaliana and Myzus persicae

Amino acids were derivatised with 4-fluoro-7-nitrobenzo-2,1,3-oxadiazol (NBD-F), separated by micellar electrokinetic chromatography (MEKC), and detected by argon-ion (488 nm) laser-induced fluorescence. The optimised MEKC background electrolyte conditions were: 40 mM sodium cholate, 5 mM beta-cyclodextrin in 20 mM aqueous borate buffer, pH 9.1, with 7% v/v acetonitrile. Using these conditions, 19 amino acids were separated within 17 min. The limits of detection were in the range of 7.6-42.2 pmol/mL and limits of quantitation from 0.05-0.14 nmol/mL. The method was systematically validated for injection volume error, migration time variation, calibration linearity, accuracy, precision, and recovery. Nanolitre volume samples of phloem sap of individual sieve element cells from the plant Arabidopsis thaliana and honeydew from the aphid Myzus persicae were directly analysed with this method. Quantitative amino acid concentrations in these two biological matrices were profiled for the first time. This method is particularly important because it allows the complete profile of the amino acids obtained from individual phloem elements, allowing cell to cell and plant to plant variation to be quantified, which to date has not been possible with Arabidopsis thaliana.     

The variation method and the algebraic eigenvalue problem

The generalized algebraic eigenvalue problem ( A ? λ B )x = 0 arises in the use of the variation method in quantum mechanics. If, within the limitations of the computer word-length, the basis set used to expand the trial wave function is linearly dependent, the matrix B becomes singular. Three different algorithms designed to deal with this difficulty have been investigated, paying special attention to the problem of identifying which members of the basis set are effectively linearly dependent. The advantages and limitations of each method are discussed.     

Synthesis and Crystal Structures of Two Novel Anionic Aluminophosphates: A One-Dimensional Chain, UT-7 ([Al(3)P(5)O(20)H](5-)[C(7)H(13)NH(3)(+)](5)), and a Layer Containing Two Cyclic Amines, UT-8 ([Al(3)P(4)O(16)](3-)[C(4)H(7)NH(3)(+)](2)[C(5)H(10)NH(2)(+)])

UT-7 and UT-8 (University of Toronto, structure numbers 7 and 8) are two novel aluminophosphate materials prepared under non-aqueous conditions. Their structures, extended in one and two dimensions, respectively, have been solved by single-crystal X-ray diffraction and characterized by a variety of methods including powder X-ray diffraction (PXRD), insitu high-temperature PXRD, thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), and scanning electron microscopy (SEM). UT-7 ([Al(3)P(5)O(20)H](5)(-)[C(7)H(13)NH(3)(+)](5), triclinic space group P&onemacr;, Z = 2, a = 10.118(3) ?, b = 15.691(4) ?, c = 18.117(3) ?, alpha = 72.91(2) degrees, beta = 85.18(2) degrees, gamma = 79.49(2) degrees ) is built of polymeric one-dimensional chain units, hydrogen-bonded into anionic layers that are charge-compensated by interlamellar cycloheptylammonium cations. UT-7 is isostructural to our previously discovered UT-3 chain structure, isolated in the analogous cyclopentylamine system. UT-8 ([Al(3)P(4)O(16)](3-)[C(4)H(7)NH(3)(+)](2)[C(5)H(10)NH(2)(+)], monoclinic space group P2(1), Z = 2, a = 8.993(4) ?, b = 14.884(8) ?, c = 9.799(9) ?, beta = 103.52(3) degrees ) is a two-dimensional net isostructural to several previously reported [Al(3)P(4)O(16)](3)(-) layers. The interlayer region of UT-8 is occupied by two different cyclic organic amine species, namely piperidinium and cyclobutylammonium. To our knowledge, this is the first report of the crystal structure of an aluminophosphate material containing cyclobutylammonium or a mixture of cyclic amines. Interestingly, UT-7 is observed to thermally transform in the solid state to an as yet unknown layered material that can be independently synthesized in a similar synthetic system. In the same way as UT-3 transforms to the UT-4 layered phase, we believe UT-7 transforms to a layered material by means of a chain to layer transformation.     

The proton affinity of proline analogs using the kinetic method with full entropy analysis

The proton affinity of proline analogs, L-azetidine-2-carboxylic acid (Aze), L-proline (Pro), and L-pipecolic acid (Pip), have been measured using the Armentrout modification of the extended kinetic method in a quadrupole ion trap instrument. Experimental values of 223.0 +/- 1.5, 224.9 +/- 1.6, and 225.6 +/- 1.6 kcal/mol have been determined for the 298K proton affinities of Aze, Pro, and Pip respectively. High level theoretical calculations using both MP2 and B3LYP methods at a variety of basis sets were carried out in order to give theoretical predictions for the 298 K proton affinity and gas phase basicity of all three analogs. Recommended values for the gas phase basicity and proton affinity for proline based on our work and other recent determinations are 216 +/- 2 and 224 +/- 2 kcal/mol.     

Biomimetic cycloaddition approach to tropolone natural products via a tropolone ortho-quinone methide

[reaction: see text] A study toward a possible biomimetic hetero Diels-Alder reaction is reported between humulene and a novel tropolone ortho-quinone methide. A suitable tropolone ortho-quinone methide precursor has been prepared from 3-methyl-2-furoate. Heating the ortho-quinone methide precursor gave a tropolone ortho-quinone methide, which in the presence of humulene underwent a hetero Diels-Alder reaction to give a deoxy analogue of epolone B.     

Protonation and methylation of η-2,3,5,6-tetramethyl-1,4-benzoquinone(η-pentamethylcyclopentadienyl)cobalt

The preparation of the η⁴-4-2,3,5,6-tetramethyl-1,4-benzoquinonecomplex [CO(C₅Me₅)(C₁₀H₁₂O₂)] (I) is reported. Complex I undergoesreversible protonation to yield the 2-6-η-4-hydroxy-1-oxo-2,3,5,6-tetramethylcyclohexadienyl complex [Co(C₅Me₅)(C₁₀H₁₃O₂)BF₄ (II) and diprotonation to yield the η⁶-6-1,4-dihydroxy-2,3,5,6-tetramethylbenzene complex [Co(C₅Me₅)(C₁₀H₁₄O₂)] (BF₄)₂ (III). Methylation of complex I with MeI/AgPF₆ gives the 2---6-η-4-methoxy-1-oxo-2,3,5,6-tetramethylcyclohexadienyl complex [Co(C₅Me₅)(C₁₁H₁₅O₂])PF₆ (IV). In trifluoroacetic acid solution complex IV is protonated to form the η⁶-1-hydroxy-4-methoxy-2,3,5,6-tetramethylbenzene cation [Co(C₅Me₅)-(C₁₁H₁₆O₂)]²⁺