Synthesis and Electron-Diffraction Structure of all-cis-[5.5.5.5]Fenestrane

The efficient synthesis of all-cis-[5.5.5.5]fenestrane ( 2 ) from the readily available intermediate 3 allowed the electron-diffraction analysis of 2 . This structure analysis revealed long C? C bonds in the central C(C)₄ fragment and a twist-envelope conformation for the four cyclopentane substructures. The four bridgehead H-atoms are in a synclinal rather than an ecliptic position with an approximate D₂ symmetry of 2 . Planarizing distortions are evident from the opposite bond angles at the central C-atom being 116.2 ± 0.5° with the remaining four being 103.7 ± 0.2°.     

Crosslinked polystyrene with improved mechanical properties

The synthesis of some divinyl monomers—bis(vinylphenyl)ethane ( 2 ), bis(vinylbenzyloxy)hexane ( 3a ), and bis(vinylbenzyloxy)dodecane ( 3b ) is reported. Copolymers of the new monomers and styrene were evaluated as an alternative to divinylbenzene-crosslinked polymers for use as matrices and absorbents. The mechanical properties and the amount of residual double bonds in the copolymers were compared. It was found that the new copolymers, unlike the divinylbenzene-crosslinked polymers, retained their mechanical strength even at high crosslinking degrees. Stress at break values of 79, 68, and 18 N/mm² were found for the polymers crosslinked with 20 mol % of 3a, 2 , and divinylbenzene; 5, 25 and 45% of the divinyl units in these polymers were left as pendant double bonds. Porous styrene– 2 copolymers were synthesized and shown to have lower surface areas than the corresponding divinylbenzene-crosslinked polymers. The pore size distribution showed that this was due to the absence of the smallest pores which are found in the divinylbenzene-crosslinked polymers in between heavily crosslinked nodules. © 1993 John Wiley & Sons, Inc.     

A new method for reversible immobilization of thiol biomolecules based on solid-phase bound thiolsulfonate groups

A new method for the reversible immobilization of thiol bimolecules, e.g., thiolpeptides and thiolproteins, to beaded agarose and other solid phases is reported. The method consists of an activation and a coupling step. The activation is based on oxidation of disulfides (or thiol groups via disulfides) present in a solid phase by hydrogen peroxide at moderately acidic pH. This oxidation leads to disulfide oxides (thiolsulfinate groups of which the majority are further oxidized to thiolsulfonate). The thiolsulfonate groups react easily with thiol compounds, which become immobilized via disulfide bonds. The pH range for thiol coupling is wide (pH 5-8), but for most thiols the reaction seems to proceed faster at pH>7. The stability of the reactive group to hydrolysis, especially at neutral and weakly acidic pH, is very high. The activated gel, therefore, can be stored as a suspension at pH 5 for extended periods. The method has been used to reversibly immobilize glutathione, β-galactosidase, alcohol dehydrogenase, urease, and papain, all with exposed thiol groups as well as thiolated bovine serum albumin and sweet-potato β-amylase. Depending on the thiol content of starting thiol-agarose, thiol-sulfonate-agarose derivatives with different binding capacities can be obtained. Thus, up to 5.0 mg (16 μmol) glutathione and 15 mg thiol-protein/mL gel derivative have been immobilized.     

Sulfonamides as ionophores for ion-selective electrodes. IV. New secondary sulfonamide podands and cryptands

New compounds — podands and cryptands with two secondary sulfonamide groups —have been synthesized and are described. They were tested as ionophores for guanidinium ions in PVC-membrane electrodes with bis (2-ethylhexyl)sebacate (DOS) as plasticizer.     

Note on a theoretical interpretation of the isotopic ratio vOH/vOD versus vOH in isotopically diluted HDO molecules in solid hydrates

A simple intra- and inter-molecular potential for water molecules engaged in hydrogen bonding has been used in a one-dimensional approximation for a theoretical interpretation of the experimental correlation $\text{v}$_OH/$\text{v}$_OD versus $\text{v}$_OH in solid hydrates. The variation in the equilibrium OH(D) distance has also been considered.     

Synthesis of 1,3,4,14b-tetrahydro-2H,10H-pyrazino[1,2-α]- pyrrolo[2,1-c][1,4]benzodiazepines

1,3,4,14b-Tetrahydro-2H,10H-pyrazino[1,2-α]pyrrolo[2,1-c] [1,4]benzodiazepines (1a-e) were synthesized to investigate their potential CNS activity. The key step in the synthesis was the formation of the 10,11-dihydro-5H-pyrrolo[2,1-c][1,4]benzodiazepine (13) by reduction and concomitant cyclization of the nitroketone (11). Biological evaluation of 1a-e revealed interesting properties for 1b (CGS 7525A) [2].     

Bonding Properties of a Novel Inorganometallic Complex, Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) (iPr-DAB = N,N'-Diisopropyl-1,4-diaza-1,3-butadiene), and its Stable Radical-Anion, Studied by UV-Vis, IR, and EPR Spectroscopy, (Spectro-) Electrochemistry, and Density Functional Calculations

Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) was synthesized and characterized by UV-vis, IR, (1)H NMR, (13)C NMR, (119)Sn NMR, and mass (FAB(+)) spectroscopies and by single-crystal X-ray diffraction, which proved the presence of a nearly linear Sn-Ru-Sn unit. Crystals of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB).3.5C(6)H(6) form in the triclinic space group P&onemacr; in a unit cell of dimensions a = 11.662(6) ?, b = 13.902(3) ?, c = 19.643(2) ?, alpha = 71.24(2) degrees, beta = 86.91(4) degrees, gamma = 77.89(3) degrees, and V = 2946(3) ?(3). One-electron reduction of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) produces the stable radical-anion [Ru(SnPh(3))(2)(CO)(2)(iPr-DAB)](*-) that was characterized by IR, and UV-vis spectroelectrochemistry. Its EPR spectrum shows a signal at g = 1.9960 with well resolved Sn, Ru, and iPr-DAB (H, N) hyperfine couplings. DFT-MO calculations on the model compound Ru(SnH(3))(2)(CO)(2)(H-DAB) reveal that the HOMO is mainly of sigma(Sn-Ru-Sn) character mixed strongly with the lowest pi orbital of the H-DAB ligand. The LUMO (SOMO in the reduced complex) should be viewed as predominantly pi(H-DAB) with an admixture of the sigma(Sn-Ru-Sn) orbital. Accordingly, the lowest-energy absorption band of the neutral species will mainly belong to the sigma(Sn-Ru-Sn)-->pi(iPr-DAB) charge transfer transition. The intrinsic strength of the Ru-Sn bond and the delocalized character of the three-center four-electron Sn-Ru-Sn sigma-bond account for the inherent stability of the radical anion.     

A comparative molecular dynamics study of crystalline,paracrystalline and amorphous states of cellulose

The quintessential form of cellulose in wood consists of microfibrils that have high aspect ratio crystalline domains embedded within an amorphous cellulose domain. In this study, we apply united-atom molecular dynamics simulations to quantify changes in different morphologies of cellulose. We compare the structure of crystalline cellulose with paracrystalline and amorphous phases that are both obtained by high temperature equilibration followed by quenching at room temperature. Our study reveals that the paracrystalline phase may be an intermediate, kinetically arrested phase formed upon amorphisation of crystalline cellulose. The quenched structures yield isotropic amorphous polymer domains consistent with experimental results, thereby validating a new computational protocol for achieving amorphous cellulose structure. The non-crystalline cellulose compared to crystalline structure is characterized by a dramatic decrease in elastic modulus, thermal expansion coefficient, bond energies, and number of hydrogen bonds. Analysis of the lattice parameters shows that Iβ cellulose undergoes a phase transition into high-temperature phase in the range of 450–550 K. The mechanisms of the phase transition elucidated here present an atomistic view of the temperature dependent dynamic structure and mechanical properties of cellulose. The paracrystalline state of cellulose exhibits intermediate mechanical properties, between crystalline and amorphous phases, that can be assigned to the physical properties of the interphase regions between crystalline and amorphous cellulose in wood microfibrils. Our results suggest an atomistic structural view of amorphous cellulose which is consistent with experimental data available up to date and provide a basis for future multi-scale models for wood microfibrils and all-cellulose nanocomposites.     

Thermomechanical treatment of two Ecuadorian zeolite-rich tuffs and their potential usage as supplementary cementitious materials

Two Ecuadorian zeolite-rich tuffs, coded as Zeo1 (Mordenite) and Zeo2 (Clinoptilolite–Heulandite–Mordenite), were treated and used as supplementary cementitious materials (SCM) so as to study the effect of the thermal and mechanical treatments on pozzolanic reaction in mortars. The treatment was carried out by means of thermomechanical process according to a central composite-blocked cube-star experimental design. In this experimental design as independent factors the milling time (48, 60, 90, 120 and 132 min) and the heating temperatures (559, 600, 700, 800 and 841 °C) were used but keeping a constant heating time (5 h), and zeolite-rich tuffs as experimental blocks. The proportion of SCM was kept constant i.e. 15 %. On the other hand, the compressive strength, fixed lime, normalized water in hydrates and mg Ca(OH)₂ per mg Cement at 7, 28 and 45 days, as well as hydration products related to dehydration degree of the zeolitic tuffs (DOD) were used as dependent factors. In addition, Quantitative and High-temperature chamber XRD, TG-DSC, particle size distribution and SEM-EDS were also carried out. The most significant factor was calcination leading to increase in the compressive strength compared to control, but just up to 800 °C because of recrystallization. As a conclusion, a meaningful loss of crystal structure of zeolites was not observed; but instead, the treatment could only lead to removing the water in cages and voids, thus improving the reaction with Ca(OH)₂, producing more hydrates. In addition, lime was not only fixed by pozzolanic reaction, but also by carbonation.