Modulation des flammenspektrometrischen Signals mittels intermittierender Probenzufuhr zur Flamme

Zusammenfassung An Stelle eines Choppers wird zur Modulation des flammenspektrometrischen Signals die Probenflüssigkeit periodisch der Flamme zugeführt (intermittierende Zerstäubung). Es wird zunächst über die beobachtete Eigenmodulation der Zerstäubung berichtet und danach über die intermittierende Zerstäubung mit Frequenzen bis zu 50 Hz. Anschließend wird an Hand von Beispielen gezeigt, daß sich die intermittierende Zerstäubung als besonders vorteilhaft in der Absorptions-Flammenspektrometrie erweist. Wird das Gleichlicht des Hintergrundstrahlers mittels der intermittierenden Zerstäubung in der Flamme moduliert und ein Wechselstromverstärker verwendet, so fallen der 0- und 100%-Durchlässigkeitspunkt zusammen. Bei der Registrierung über die Wellenlänge werden dann nur solche Linien angezeigt, welche in der Flamme das eingestrahlte Licht absorbieren.

---

Summary For modulating the flame spectrometric signal without using a chopper the sample is introduced into the flame periodically (intermittent atomisation). First, the observed self-modulation of the atomisation is described and subsequently the intermittent atomisation with frequencies up to 50 cps. Some examples demonstrate that intermittent atomisation proves to be especially advantageous in absorption flame spectrometry. When modulating the light of the dc-operated line source by means of intermittent atomisation and using ac-amplification of the modulated signal the 0- and 100%-transmittance points of the transmittance scale are the same. When scanning over the wave length only such lines are detected which absorb the light of the background source.

---

---

Der Fa. Siemens-Reiniger Werke AG., Erlangen, und insbesondere Herrn Ing. Engel danken wir auch an dieser Stelle für die leihweise Überlassung des Flüssigkeitsstrahloscillographen Cardirex 31 B. — Herrn K. RÜdiger danken wir für die wertvollen Hinweise und für die Durchführung der Werkstattarbeiten.     

Übergangsmetall-methylen-komplexe: LVI. Organoruthenium-komplexe mit offenkettigen und carbocyclischen alkyliden-brücken: Synthese,konstitution, isomerie,protonierung und thermolytischer abbau

The eighteen new μ-alkylidene ruthenium complexes 5a–r and 5t are very easily and cleanly obtained along the diazoalkane or the hydrazone routes that involve treatment of the dinuclear, metal-metal doubly bonded precursor compound [(η⁵-C₅H₅)Ru(μ-NO)]₂ (3) either with the diazoalkanes oxidizing agent (e.g., MnO₂), with the respective hydrazones. Similarly, sulfur dioxide adds cleanly to the RuRu double bond of 3, thus giving the complex (μ-SO₂)[(η⁵-C₅H₅)Ru(NO)]₂ (5s). Regardless of the nature of the carbene bridge ligands, the dimetallacyclopropanes exhibit, in contrast to their iron analogues, exclusively terminal nitrosyl ligands. cis/trans-Isomerism with predominating amounts of the trans-isomers is observed for the derivatives that display unsymmetrically substituted carbene bridges.Treatment of the μ-methylene- and μ-ethylidene complexes (μ-CH₂)[(η⁵-C₅H₅)Ru(NO)]₂ (5a) and (μ-CHCH₃)[(η⁵-C tetrafluoroboric acid or trifluoromethanesulfonic acid in diethyl ether yields, at ambient temperature, quantitatively the ionic complexes 6a,b and 7a,b, respectively, which were shown by ¹H NMR spectroscopy to contain metal-metal bridging hydrogen functionalities. The reaction of hydrogen bromide with 5a under the same conditions gives the neutral bromo(methyl) complex 6d. This latter compound results from the isolable ionic intermediate of composition [(μ-CH₂)(μ-H){(η⁵C₅H₅)Ru(NO)}₂]⁺Br^? (6c), which reaction stems from the nucleophilicity of the halide ion present in 6c.     

Multiple Bonds between Transition Metals and “Bare” Main Group Elements: Links between Inorganic Solid State Chemistry and Organometallic Chemistry

The last two decades have seen a dramatic development in the study of metal-metal multiple bonds, particular successes being recorded in the field of organometallic chemistry. Syntheses designed to produce novel transition metal complexes with single, double, triple and quadruple metal-metal bonds occupy a most important place in such research, as also do reactivity studies. A striving to establish general principles has provided much of the motivation for such work, but one less obvious goal—the commercial application of the catalytic properties of metal-metal multiple bonding systems, in the medium and long term—should not be overlooked. All aspects of the investigations of metal-metal multiple bonds also apply to a particular class of compound that has, however, enjoyed little lime-light and thus deserves the present review: complexes with multiple bonds between transition metals and substituent-free (“bare”) main group elements. Although based mostly on accidental discoveries, the few noteworthy examples are now beginning to unfold general concepts of synthesis that are capable of being extended and thus are deserving of exploitation in preparative chemistry. The availability of further structural patterns exhibiting multiple bonds between transition metals and ligand-free main group elements might enable preparative organometallic chemistry to expand in a completely new direction (for instance by the stabilizing or activation of small molecules at the metal complex). This essay discusses the chemistry of complexes of bare carbon, nitrogen, and oxygen ligands (carbido-, nitrido-, and oxo-complexes) and their relationships to higher homologues from both a synthetic and a structural point of view.     

MM3 parametrization of four‐ and five‐coordinated rhenium complexes by a genetic algorithm—Which factors influence the optimization performance?

Genetic algorithms (GA) were used to solve one of the multidimensional problems in computational chemistry, the optimization of force field parameters. The correlation between the composition of the GA, its parameters (p(c), p(m)) and the quality of the results were investigated. The composition was studied for all combinations of a Simple GA/Steady State GA with a Roulette Wheel/Tournament Selector using different values each for crossover (0.5, 0.7, 0.9) and mutation rates (0.01, 0.02, 0.05, 0.10, 0.20). The results show that the performance is strongly dependent on the GA scheme, where the Simple GA/Tournament Selector yields the best results. Two new MM3 parameters were introduced for rhenium compounds with coordination number four (204) and coordination number five (205), the formal oxidation states of rhenium ranging from +V to +VII. A manifold of parameters (Re-C, N, O, S) was obtained by using a diverse set of CSD structures. The advantage of the GA vs. UFF calculations is shown by comparison of several examples. The GA optimized parameters were able to reproduce the geometrical data of the X-ray structures.     

Spectrophonic humidity-trace detection in hydrogen and air

A spectrophone with low resonant frequency compatible with the repetition frequency of a pulsed discharge CO laser is described. The spectrophone is used for humidity detection in hydrogen and air. The simple and inexpensive system provides a detection capacity of 10–100ppb/ . The responsivity of the resonant spectrophone is interpreted taking the dependence of the acoustical quality factor on the geometry into account.     

Verdampfung von Uranspaltprodukten in Wasserstoff, Stickstoff und Sauerstoff

Zusammenfassung Die Verdampfung der Spaltprodukte Germanium, Arsen, Molybdän, Ruthenium, Cadmium, Zinn, Antimon und Tellur aus bestrahltem U₃O₈ im Wasserstoff-, Stickstoff- und Sauerstoffstrom wurde zwischen 900 und 1500° C untersucht. Bei 1500° C verdampfen die meisten dieser Elemente innerhalb 1 Std mit hoher Ausbeute.

---

Summary The volatization of the fission products germanium, arsenic, molybdenum, ruthenium, cadmium, tin, antimony and tellurium from neutron-irradiated uranium oxide in flowing hydrogen, nitrogen or oxygen of atmospheric pressure was investigated between 900 and 1500° C. At 1500° C, most of these elements are volatized with high yield within one hour.

---

---

Herrn Prof. Dr. F. Strassmann danken wir herzlich für die Förderung dieser Arbeit, Herrn I. Bonner für seine Mitarbeit, den Betriebsstäben der Forschungsreaktoren Frankfurt und München, insbesondere Herrn Dr. G. Wolf (Frankfurt), für Bestrahlungen und dem Bundesministerium für wissenschaftliche Forschung für finanzielle Beihilfen.

---

Herrn Prof. Dr. W. Geilmann zum 75. Geburtstag gewidmet.

---

Aus einer Dissertation, Mainz 1963.     

Hydrogen determination by means of the1H(19F, αγ)16 O and1H(15N, αγ)12C resonance reactions

Hydrogen surface contamination and depth profiles can be measured by the resonant nuclear reactions¹H(¹⁹F, )¹⁶O and¹H(¹⁵N, )¹²C. The method was applied to study hydrogen-implanted silicon, amorphous silicon layers and silicon oxide films produced by anodic oxidation.     

Coulometrisches Verfahren zur Bestimmung von Gesamt-, Carbonat- und Nichtcarbonat-Kohlenstoff in magmatischen, metamorphen und sediment?ren Gesteinen

Zusammenfassung Für die Bestimmung von Gesamt-, Carbonat- und Nichtcarbonat-Kohlenstoff in magmatischen, metamorphen und sedimentären Gesteinen (auch bei höheren Anteilen an organischem C) ist ein Verfahren nach dem Prinzip der coulometrischen Titration geeignet. Der Gesamt-Kohlenstoff wird ermittelt durch Erhitzung der auf <0,125 mm zerkleinerten Probe bei etwa 1250°C im Sauerstoffstrom ohne irgendwelche Zusätze. Zur Bestimmung von Nichtcarbonat-Kohlenstoff wird eine bestimmte Menge Gesteinspulver mit Salzsäure versetzt und auf einem Aluminiumblock HCl abgeraucht. Der Carbonat-Kohlenstoff entweicht als CO₂. Zurück bleibt der Nichtcarbonat-Kohlenstoff, welcher wie der Gesamt-Kohlenstoff coulometrisch bestimmt wird. Der Carbonat-Kohlenstoff bzw. die äquivalente Menge CO₂ ergibt sich dann aus der Differenz von Gesamt- zu Nichtcarbonat-Kohlenstoff. Das Verfahren ist anwendbar auf Kohlenstoffgehalte in Gesteinen von etwa 10 ppm bis 20 Gew.-% bei mittleren Standardabweichungen von etwa 0,0002–0,05% C (Richtwerte). Die Analysendauer für eine Probe beträgt etwa 3–5 min.

---

Coulometric method for the determination of total, carbonate, and non-carbonate carbon in igneous, metamorphic, and sedimentary rocks

For the measurement of total carbon the sample, ground finer than 0.125 mm and without the addition of any reagents, is ignited in a current of oxygen at about 1250°C. Non-carbonate carbon can be analysed after another portion of the sample is treated with conc, hydrochloric acid and evaporated on a hot plate; the carbonates are decomposed and the carbonate carbon is removed as carbon dioxide. The residue is non-carbonate carbon which is also determined by the coulometric method. The difference between total carbon and non-carbonate carbon corresponds to carbonate carbon or its equivalent as carbon dioxide. The method is applicable to carbon contents in rocks from 10 ppm to 20 wt.-%. The standard deviation is approximately 0.0002 to 0.05% C. Each carbon analysis takes about 3 to 5 min.

     

Metallcarbonyl-Synthesen,XIV. Neuartige Vanadium-, Niob- und Tantal-Komplexe mit Wasserstoff-Brücken

Syntheses of Metal Carbonyls, XIV. Novel Vanadium, Niobium, and Tantalum Complexes Having Hydrido Bridges The novel homo- and heterodinuclear organometallic μ-hydrido compounds 3a – c of vanadium, niobium, and tantalum have been synthesized by light-induced reactions of the hydridoniobium complex (η⁵-C₅H₅)₂NbH₃ ( 1 ) with the half-sandwich complexes (η⁵-C₅H₅)M(CO)₄ ( 2a : M = V; 2b : M = Nb; 2c : M = Ta). These compounds have the general composition L_xM – H – Nb(CO)(η⁵-C₅H₅)₂. The formation of the M – H – Nb moieties is a dark-reaction preceded by two photoreactions that are independent from each other elimination of CO from 2a – c and elimination of H₂ from 1 , with the extruded carbon monoxide being transfered to the (η⁵-C₅H₅)₂NbH fragment; subsequent fixation of the species (η⁵-C₅H₅)₂Nb(CO)H thus generated to the photogragments (η⁵-C₅H₅)M(CO)₃ results in donor stabilization of these latter groups. The structural architecture of the derivatives 3a und b was established by X-Ray diffraction. The hydrogen bridges are to be considered as three-center two-electron functions that are responsible for a serious lengthening of the otherwise by at least 40 pm shorter metal-to-metal distances amounting to 371.3 pm in 3a and 373.3 pm in 3b (mean values).